Only show results available in Virginia? Ok

utility flare (Flares) equipment

  • Premium

    AEREON - Utility Flares

    Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two ...

    By AEREON based in Austin, TEXAS (USA). from Utility Flares Product line

  • Utility Flares

    MRW is a leader in utility flare innovation and design, having supplied and installed successful, proven heavy industrial utility flares worldwide. MRW utilizes modern structural and control techniques and proven flare tip and seal designs based on experience with over 1,000 flare installations. MRW is committed to manufacturing the best utility ...

    By MRW Technologies, Inc. based in Glenpool, OKLAHOMA (USA).

  • Utility Flares

    Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and ...

    By Europem N.V based in Lier, BELGIUM. from Utility Flares Product line

  • Premium

    AEREON - Model Utility Series - Flare Systems

    Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas ...

    By AEREON based in Austin, TEXAS (USA). from Flare Systems Product line

  • Combustion Research Associates - Sonic Utility Flares

    Utility Flares are the simplest and most economical type of flaring systems that work well in applications that don't require smokeless burning or where smokeless burning is attained without assistance from air, steam or gas. We also manufacture low flow flares and sonic flares with high-pressure tips to reduce emissions and provide cost effective ...

    By Combustion Research Associates based in Noida (New Delhi-NCR), INDIA.

  • Premium

    AEREON - Model Momentum Series - Biogas Flares and Enclosed Flares

    The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and high ...

    By AEREON based in Austin, TEXAS (USA). from Biogas Flares and Enclosed Flares Product line

  • Premium

    AEREON - Gas-Assist Flares

    Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, improves combustion efficiency and smokeless performance. These flares generally ...

    By AEREON based in Austin, TEXAS (USA). from Gas-Assist Flares Product line

  • Premium

    AEREON - Model Inferno Series - Gas-Assist Flares

    AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary ...

    By AEREON based in Austin, TEXAS (USA). from Gas-Assist Flares Product line

  • PRM - Utility Enclosed Flares Systems

    PRM Flare Systems are used for controlling Methane (CH4) and Carbon Dioxide (CO2), as by-products of Landfill Bio-degradation. PRM specializes in designing and manufacturing flares for landfill applications up to 10000 SCFM with destruction rates of up to 98% efficiency. Other markets include waste-water and agricultural applications.

    By Product Recovery Management (PRM) based in Butner, NORTH CAROLINA (USA). from Utility Enclosed Flares Systems Product line

  • Premium

    AEREON VariMach - Variable Orifice Sonic Flare

    The VariMach sonic flare tip features spring-actuated variable sonic nozzles to allow the exit area to vary with pressure, ensuring constant sonic velocity of the exiting waste gas. This industry proven technology guarantees sufficient inspiration of air to ensure 100% smokeless combustion and infinite turndown. Radiation levels are also minimized ...

    By AEREON based in Austin, TEXAS (USA). from Variable Orifice Sonic Flare Product line

  • Premium

    Shand & Jurs Biogas - Model 97301 - Waste Gas Flare

    The Shand & Jurs Biogas 97301 Waste Gas Burner is specifically designed for dependable 'Flaring' operation that utilizes low BTU anaerobic digester waste gases. Typical applications include anaerobic digesters, lagoons, landfills and methane offgas from other fermentation processes. The 97301 efficiently incinerates waste gases thus ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Flare Product line

  • Premium

    AEREON - Model MPGF - Multi-Point Ground Flare Systems

    When ample real estate is available, multi-point ground flare (MPGF) systems are an economical approach to enclosed (hidden) and smokeless combustion of large amounts of process gas. By inducing gas through a large array of high-pressure burning points/burners, smokeless combustion can be achieved with high turndown, while concealing all radiation ...

    By AEREON based in Austin, TEXAS (USA). from Multi-Point Ground Flare Systems Product line

  • UOP Callidus - Model PFA - Pipe Flares

    High stability flame retention system allows the flare to bum during all types of weather conditions. The pipe flare is the most basic type of flare tip. It is sometimes called an “utility flare”. Pipe flares will not smoke when burning low carbon content gases. The UOP Callidus Pipe Flare (CAL-PF) incorporates key design features to ...

    By Callidus Technologies - part of UOP, a Honeywell Company based in Tulsa, OKLAHOMA (USA). from Pipe Flares Product line

  • ITAS - Offshore Flares

    Safety and reliability are crucial for offshore applications. ITAS offshore flares are robust, proven, long-lasting and safe. Designed to comply with the most stringent quality standards, ITAS offshore flares range from simple low-pressure utility flares to the sophisticated “swing-out” liquid burner systems.

    By Fives I.T.A.S. s.p.a. based in Monza, ITALY. from Offshore Flares Product line

  • Sunpower - Flare and Flare Gas Recovery

    Sunpower is able to reasonably arrange discharge and recycle systems per various discharge components after making a comprehensive analysis of flare discharge gases in order to utilize different flare gas components to a maximum extent.

    By Sunpower Group based in Nanjing, Jiangsu Province, CHINA. from Flare and Flare Gas Recovery Product line

  • ITAS - Elevated Flares

    Elevated flares are vertical stacks used to dispose of waste gases through combustion; the “flare tips” (flare burners) are located at the top, which ensures personnel, plant and environment safety. ITAS elevated flares range from low-investment small utility stacks up to the tallest and largest capacity flares worldwide.

    By Fives I.T.A.S. s.p.a. based in Monza, ITALY. from Elevated Flares Product line

  • Enclosed Ground Flares

    The enclosed ground flare is used in applications that required a non-visible flame,where space is limited, populated areas, and increase in destruction efficiency is required. This can be accomplished by utilizing temperature control on the enclosed ground flare.Enclosed flares can be free standing or skid mounted depending on the size. The ...

    By Parnel Biogas, Inc. based in Tulsa, OKLAHOMA (USA).

  • Cold Drawn Seamless Pipe

    Cold drawn seamless steel pipe is used for the mechanical structure, hydraulic equipment ,which is have precision size ,good surface finish.It can greatly reduce mechanical processing hour and improve material utilization, and to improve the quality of products. High quality of cold draw seamless steel pipe are mainly use the 10# 20#.In addition ...

    By Hunan Great Steel Pipe Co., Ltd. based in Changsha City, CHINA. from Cold Drawn Seamless Pipe Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you