Flares Equipment For Energy Management In USA
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Special Solutions for Preadmission Applications. The direct-drive GM ... dz blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas mixtures. Highly advanced and extremely robust Roots-type products. Available in a wide range of special materials and seals, such as ...
-
PremiumManufactured by TRIC Tools, Inc.based in USA
The 1″ Copper Nut is used when attaching a new 1″ copper line to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-1WED). The Copper Flaring Tool (TT-WDGE-CFT) is used to flare the new copper pipe before it is attached to the head using the 1″ Copper Nut. Be sure to put the nut on the new pipe before flaring it! The Manufacturer’s user guide is ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular opto-electronic package for easy removal from ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and smooth acting with low maintenance and high MTBF. It also offers ...
-
Manufactured by Stackmatch Flare Ignition, Inc.based in USA
STACKMATCH has an array of High Energy Ignition systems that can be used in your existing or new Flare Pilot application. Insert a STACKMATCH Ignition Probe into your pilot and know that your pilot will ignite and re-ignite whenever it is supposed to. Our Ignition Probes can be designed around any Pilot application. We’ll build to your specification based on the length of Probe and ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Chimera was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for various onshore applications that require high destruction efficiency of liquid hydrocarbons. When oil is flared, a high pressure media such as an air, gas, or steam is required to mechanically atomize the heavy hydrocarbons for proper and stable ...
-
based in USA
With the evolving shale gas market, the demand to build gas processing plants faster, without affecting quality and high performance, continues to develop. Many engineering companies have developed standard designs for core cryogenic equipment. Linde is the only company that has developed completely pre-engineered, modularized standard natural gas liquids (NGL) recovery plants covering the wide ...
-
Manufactured by Albemarle Corporationbased in USA
Mixed with oxidizing agents ZrH2 will be used as a constituent part in compositions for flares, fuzes and combustion charges in pyrotechnics. As a binder or brazing component for grinding agents, carbides, ceramics, and metal in abrasive wheels and polishing disks. ZrH2 is also applicable as a hydrogen source for foaming of metals.For the production of highly effective getters and as an alloying ...
-
Manufactured by Williamsonbased in USA
The Williamson Smokeless Flare Monitor (FM) utilizes proven dual-wavelength technology to monitor the ratio of carbon to available oxygen deep within the hot flare flame. This ratio value correlates to combustion efficiency and is used to adjust the flow of air or steam to smokeless flares, thus assuring smoke-free operation and maximum combustion ...
-
Manufactured by Hero Flare LLCbased in USA
Hero Flare offers an excellent alternative to elevated flares for those applications where an exposed flame is not desirable. The Hero Enclosed Combustors are designed to provide a smokeless burn in accordance with the Quad O ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
An incinerator or thermal oxidizer provides the ultimate in destruction efficiency. An incinerator is a fired appliance used to oxidize potentially dangerous hydrocarbons (including BTEX’s) and sulfur compounds from oil and gas production processes. Designed with precise calculations, incinerators achieve in excess of 99.9% Destruction Removal Efficiency (DRE). An incinerator uses an active ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 106 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a ...
-
Manufactured by K & S Equipment and Machinery Corporationbased in USA
Our team of engineers and technicians are aware of the varying needs of vacuum technology for different applications. We offer unmatched expertise in the design and manufacture of systems to meet the specific needs of your processes. The systems can be easily integrated into your operation and assist in minimizing ...
-
Manufactured by Applied Separations, Inc.based in USA
The wide openings of both the 100mg and 500 mg (the nominal amount of sorbent) large reservoir cartridges (LRC) allow for sample or rinse volumes greater than that allowed by the standard cartridge. The flared shape accommodates 15mL of sample without using additional reservoirs or adaptors. ...
-
Manufactured by Vaprox LLCbased in USA
Vaprox offers both Two-Phase Fuel Gas Separators and Three Phase Fuel Gas Separators. The Vaprox Staff will meet with your Facility Engineers to custom design the Separator best suited for your application. As with any Vaprox products, you can be sure you are getting the absolute highest quality and reliability available on the market. Our two-phase and our three-phase fuel gas separator devices ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
Enclosed ground flares are used to destroy waste gases without radiation effects or visible flames, and with limited noise, minimized footprint and visual impact. Fives offers a range of ITAS enclosed ground flares whose burners and stack are designed to accommodate the thermal requirements of enclosed flames. ITAS pioneering technology includes several options to allow for smokeless operations ...
-
Manufactured by Hero Flare LLCbased in USA
The HERO Low Flow Flare is specifically designed for low flow flare applications, or for those sites located in remote locations and do not have access to electric or pilot fuel gas. The most common application is flaring off low pressure tank vapors and remote ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
The air assisted flare represents an effective alternative to traditional, steam-assisted smokeless flares. Significant advantages of the air-assisted design is a dramatic reduction in maintenance of the flare tip and lower operating costs.The continual flow of forced draft air cools the tip and prevents flame pull down in high wind ...
-
Manufactured by Dinex A/Sbased in DENMARK
Dinex designs and manufactures high quality clamps for connecting exhaust components. Our long-term experience enables us to provide custom designs tailored to suit your clamping requirements. We can offer high strength, low weight clamps for demanding applications such as those at elevated temperatures requiring gas-tight joints. Furthermore, we can give technical support in the form of product ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you