Flares Equipment For Energy Management
-
Manufactured by HiLo Group USA Inc.based in USA
Controls Flow Rate. No Visible Flame or Radiating Heat. Ceramic Lined. Cleanest Flare in Operation. Built in Safety Features. Cost Efficient. Reliable. Easy to Operate. Exceeds All Environmental ...
-
Distributed by Blue Ocean Marine Equipmentbased in USA
Fitted to the bow/stern of modern tug boats and usually used to push against flared hulls and in open sea conditions. The round shape is ideal for working with large bow flares (like container ships), but equally good for pushing flat-sided vessels. The standard color is black, non marking Navy gray available upon request. Diameters ranging from 300mm x 1000mm and length up to 22000mm. With ...
-
based in AUSTRIA
Introduced in 1976, INNIO's Jenbacher Type 2 gas engine offers high efficiency power with a robust design. The stationary engine concept provides excellent durability, while enhanced components and a proven control and monitoring model give the Type 2 engine outstanding reliability. ~1,250 engines delivered since 1976. J208 – efficient L8-cylinders power generation solution for small/mid ...
-
Manufactured by LTC Healthcarebased in UNITED KINGDOM
Smooth, plain, natural latex, flared, teat ended, and silicone lubricated condom. Amaze your partner with the EXS Glow in the Dark Condom. Simply hold the condom up to a light whilst in the condom wrapper then after 45 seconds put the condom on and be ready to glow! ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Manufactured by Total Combustion Inc. (TCI)based in CANADA
The TCI-3000 is an environmentally friendly alternative to flaring. Combustion efficiency is 99.8% resulting in no smoke, no odor, and no visible flame during normal operations. This is a preferred method when operating in sensitive areas such as near residents. TCI products are also robust, simple to use and require very little ...
-
Manufactured by MRU Messgerate fur Rauchgase und Umweltschutz GmbHbased in GERMANY
Portable syngas analyser for long-term measurements of special gases ...
-
Distributed by GBA Flare Systemsbased in UNITED KINGDOM
GBA offer a full range of ignition equipment to suit all requirements. We offer the well tried and tested Flame Front Generator (FFG) in both forced draft (uses compressed air) and natural draft (inspirates it's own air) versions but increasingly we find that our modern state of the art CHT High Energy direct electric ignitors are finding favour with clients who want a simple to operate, reliable ...
-
Distributed by Separ of the Americas LLCbased in USA
79 GPH fuel water separator of the SWK-2000 Series. Filter can be mounted directly on diesel ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
-
Manufactured by Prism Integrated Solutions Inc.based in CANADA
Designed for gas well locations where high volumes of gas are blown down for maintenance reasons. The large integral base knockout ensures that condensates flowing from the well are contained in the knockout and not sprayed around causing a dangerous condition. These can be guy wire or self-supporting depending on available space and ...
-
Manufactured by Sagar Steel Corporationbased in INDIA
Sagar Steel Corporation is one of the leading 904L Fasteners Manufacturer in Mumbai, India. We are an ISO 9001:2008 certified company with an existence in the metal market since 2003. Stainless Steel UNS N08904 Fasteners products are designed and developed per international and national quality standards. We offer the best possible prices for Stainless Steel 904L Washers to all our customers, ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground flare systems and ancillaries to cover the needs of all ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
For the disposal of waste gases from industry, composting plants, waste treatment plants or for the transportation of sewage gases and biogases, individual gas compressor stations are required. These extract the gas where it is generated (e.g. at the fermenter, the dump, anaerobic digester or large tank) and compress the gas until the required pressure for the subsequent process steps is reached. ...
-
Manufactured by VP Engineersbased in INDIA
Tube insert is inserted into the end of a heat exchanger tube to provide protection to the tube mouth ends of a shell & tube type heat exchanger. The purpose of the tube insert is to either be sacrificial to the effects of inlet-end erosion, corrosion and impingement, or induce a fluid to fall on the ID of a tube in a falling film exchanger, or transfer extremely high heat past the tube sheet ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
An optimum solution for safe and efficient degassing of old landfill sites or sites with low quality gas. The innovative HOFGASÒ- Lowcal high temperature flare is designed to provide greater gas control during the latter phases of a ...
-
Manufactured by LAMBDA Gesellschaft für Gastechnik mbHbased in GERMANY
The LAMBDA biogas and sludge gas flare serves as an inspection and safety device at biogas and sludge gas plants for the thermal treatment of excess gas. Since the continuous process of gas production in these plants can only be influenced to a slight extent in the event of a failure of the utilisation plant, the LAMBDA flare safely disposes of the biogas not collected in the gas storage. This ...
-
Manufactured by Sagar Steel Corporationbased in INDIA
Sagar Steel Corporation is one of the leading 310S Fasteners Manufacturers in Mumbai, India. SS 310S Bolts. We are an ISO 9001:2008 certified company with an existence in the metal market since 2003. Stainless Steel UNS S31008 Fasteners products are designed and developed per international and national quality standards. We offer the best possible prices for Stainless Steel 310S Screws to all our ...
-
Manufactured by Prithvi Industriesbased in INDIA
Usage : Industrial, Material : Mild Steel, Automation Grade : Semi Automatic, Capacity : 2000 m3/hour, Country of Origin : Made in India, Voltage : 320 V, Frequency : 50 Hz, Power : 4 ...
-
Manufactured by Pyrotech Energybased in AUSTRALIA
Mobile PyroFlash plants are standard equipped with a dosing silo on top of the installation. The biochar is removed from the reactor with a screw conveyor, the liquid products are pumped. The syngas can be sent to flare for thermal use or used as a gaseous bio-fuel connected to a gas generator for electricity ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you