Flares Equipment For Energy Management
-
Manufactured by Flare Products Limitedbased in UNITED KINGDOM
The control panel is responsible for controlling and monitoring the flare system. The set up and operation is the same for elevated, ground or skid mounted flares. Depending on specification and scope, the control panel can take many different shapes or forms. It will typically contain indication lamps, e-stop, isolator, selector switches, relays, ignition transformer, timers and temperature ...
-
Manufactured by NRG Process Solutions (NRG)based in CANADA
An essential component of the flare system, Flare Knock Out Drums (FKOD’s) designed by NRG Process Solutions are as compact as possible, usually with a small building for the controls. The FKOD acts as a filter and separates liquids and solids from the gas stream, which prevents these substances from entering the flare system and causing damage to equipment or safety issues. Designed to ...
-
Manufactured by Canatubased in FINLAND
EUV pellicles are membranes used to protect the photomask from contamination while permitting high EUV transmission. EUV pellicles made of Canatu CNT offer unique benefits unparalleled by other materials. EUV pellicles made of Canatu CNT are a critical enabler of high yield and throughput in high-volume semiconductor manufacturing. EUV pellicles protect the photomask from defects, enhance ...
-
Manufactured by Sagar Steel Corporationbased in INDIA
Sagar Steel Corporation is the leading Manufacturer and Supplier of Alloy 20 Fasteners in India. One of our most popular products in the metal market is Alloy 20 Fasteners manufactured in Mumbai, India. We are an ISO 9001:2008 certified company with an existence in the metal market since 2003. All ASME SF468 Alloy 20 Fasteners products are designed and developed per international and national ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The FAII biogas flare is an automatic, enclosed gas flare for combustion of biogas and other combustible gases, fully complying with the widely applied German air pollution regulation TA Luft. +500 references in more than 50 countries witness the robustness of our FAII flares! Available in a rage of 20 - 3.000 Nm3/h, at various pressures. Highly customizable for very particular project ...
-
based in THAILAND
Based on more than 30 years of practical experience with biogas use as fuel, GWE can offer burners and boiler modifications to utilize the produced biogas in single and multiple fuel arrangements. GWE has supplied and commissioned biogas utilization systems in steam boilers, water heaters, thermal oil boilers, and direct-fired driers, and in combination with a very large variety of other fuels ...
-
Manufactured by Shanghai Tianyang Steel Tube Co.,Ltd.based in CHINA
Synopsis of Process Routing:Quality carbon steel 、cold rolling 、bright heat treatment without oxidization (NBK status) 、nondestructive testing、in the wall honing and inside flushing under the high pressure、 antirust oiling outside surface、 plastic capping on both ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
Conventional heat exchangers can only be used within limitations on account of their material properties at high temperatures. For this reason, only a small part of the heat from the flame can be used for the pre-heating of the raw gas. The patented recuperative combustion chamber from C-nox (patent no.: 10 2012 023 257) improves the heat recovery from exhaust gases and allows the autothermal ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The FAI is an open-combustion flare, which can be configured in manual ignition as standard. Optionally, the FAI can be updated to Automatic mode, before or after* purchasing. That makes the New FAI the best and most cost-effective option for locations where no automatic flare is mandatory and open combustion is allowed! Available up to 500 Nm3/h, from 2,5 to 20 ...
-
based in USA
During the last decade, liquefied natural gas (LNG) has become the new black in the gas industry and recognizing its huge market potential, Calvert is among the first to venture into small-scale LNG development. With the cost-competitiveness and environmental advantages of LNG over petroleum products, it is proving to be a viable source of fuel globally even for small-scale installations. Calvert ...
-
Manufactured by G.I. Dynamicsbased in NETHERLANDS
Improvement of air quality is one of the key concerns to sustainable development worldwide. As strict environmental regulations are being enacted to protect the public and minimize harmful atmospheric emissions, our Clients look at us to develop solutions that meet regulatory compliance and allow them to operate cost effectively in an environmentally responsible and sustainable ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UFU10 range of flares and gas utilisation equipment are generally tailored to suit the customer’s application and specific requirements and offer seamless control of the gas between its utilisation application and the flare stack. These units come in various sizes from 10 Nm3hr through to over 10,000 Nm3hr if ...
-
Manufactured by GLS Tanks International GmbHbased in AUSTRIA
Standard Configuration: manufacturing after DIN, material: S235 hot dip galvanised, back rest after ...
-
Manufactured by SnapLok Systems, LLCbased in USA
This kit provides a great mix of cleaning heads and rod selection for rotary cleaning open fireplaces and other masonry flues as well as 6" stove liners, 8x8 masonry flues and prefab/manufactured fireplaces. The kit includes 5/8", 3/4" and 13/16" dia. rods. When cleaning from the bottom up, start with the smaller dia. rods first (5/8" and/or 3/4") then start adding the larger rods as you get ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
Manufactured by HiTemp Technology (HTT)based in USA
HiTemp has developed a system that mixes the methane stream with sufficient combustion air to maintain a consistent temperature assuring maximum destruction of any methane present in the exhaust ...
-
Manufactured by Hunan Great Steel Pipe Co., Ltd.based in CHINA
Inspections and tests performed for the tubes: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness). Surface and Dimension Test, Non-destructive Test, Hydrostatic ...
-
Manufactured by Kobelcobased in JAPAN
Kobelco oil-free screw gas compressors are designed to satisfy the latest API 619 (rotary-type positive displacement compressors for petroleum, chemical and gas industry services) requirements for service in heavy and continuous duties. They are intended to deliver years of continuous, uninterrupted operation. Oil-free screw gas compressors are suitable for complex and dirty gas services, such as ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and high turndown ratio in a simple, yet effective, product. ...
-
based in ITALY
WT ENERGY SMEA provides landfill gas (LFG) collection systems for existing landfills, designed to capture the gas produced by decomposing waste before it impacts the environment, and utilize it as a fuel source for electrical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you