Only show results in Virginia? Ok

Flares equipment for Energy Management

  • Premium

    AEREON - Flame Front Generators (FFG)

    Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The ...

    By AEREON based in Austin, TEXAS (USA). from Flame Front Generators (FFG) Product line

  • Premium

    AEREON - Chimera Liquid Burner

    The Chimera was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for various onshore applications that require high destruction efficiency of liquid hydrocarbons. When oil is flared, a high pressure media such as an air, gas, or steam is required to mechanically ...

    By AEREON based in Austin, TEXAS (USA). from Chimera Liquid Burner Product line

  • Premium

    AEREON - Peacock Liquid Burner

    The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical ...

    By AEREON based in Austin, TEXAS (USA). from Peacock Liquid Burner Product line

  • Premium

    AEREON Triton - Water Injected Sonic Flares

    Triton sonic flare technology allows for safe, efficient and smokeless flaring at elevated oil and gas production rates by injecting sea water into the flame envelope. High pressure sea water injection reduces flare emissions, helps minimize overall radiation levels from the flame, abates combustion noise, and preserves flame characteristics ...

    By AEREON based in Austin, TEXAS (USA). from Water Injected Sonic Flares Product line

  • Premium

    AEREON Energex - Model 250 - High Alloy, Stainless Steel Pilot

    The Model 250 Energex Pilot is a high alloy, stainless steel pilot which combines a high voltage electronic excitor and a high energy spark rod to provide rapid, reliable ignition. More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other ...

    By AEREON based in Austin, TEXAS (USA). from High Alloy, Stainless Steel Pilot Product line

  • Premium

    AEREON - Model MPGF - Multi-Point Ground Flare Systems

    When real estate is available, multi-point ground flare (MPGF) systems are an economical approach to smokeless combustion of large amounts of process gas. By inducing air to a large array of high-pressure burning points, smokeless combustion can be achieved with high turndown, while concealing all radiation within walls. MPGF systems provide ...

    By AEREON based in Austin, TEXAS (USA). from Multi-Point Ground Flare Systems Product line

  • Premium

    Shand & Jurs Biogas - Model 97310 - Enclosed Flare

    The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Enclosed Flare Product line

  • Premium

    Shand & Jurs Biogas - Model 97301 - Waste Gas Flare

    The Shand & Jurs Biogas 97301 Waste Gas Burner is specifically designed for dependable 'Flaring' operation that utilizes low BTU anaerobic digester waste gases. Typical applications include anaerobic digesters, lagoons, landfills and methane offgas from other fermentation processes. The 97301 efficiently incinerates waste gases thus ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Flare Product line

  • Premium

    GE - Model APG - Associated Petroleum Gas / Flare Gas

    Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Associated Petroleum Gas / Flare Gas Product line

  • Premium

    Shand & Jurs Biogas - Model 97311T - Enclosed Burner with Touch Screen Control Panel

    Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97311T Enclosed Flare incinerates harmful emissions from waste gas streams. ...

  • Premium

    BIOPAQ - Biogas Flare

    The BIOPAQ Biogas Flare combines a sturdy quality with a unique compact design aimed at simplicity. This means that methane-rich biogas of a low pre-pressure can be discharged safely and reliably without involving failure-prone rotating equipment such as ventilators or control valves.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Shand & Jurs Biogas - Model 97200 - Flame Check

    The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm regulators.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Flame Check Product line

  • C-nox - Model NTO and NTV - Low-Temperature Flares

    Thanks to the modular system, the most economical solution is available for every application. Design examples for all biogases, sewage gases or synthetic gases for combustion temperatures of up to 850°C:

    By C-nox GmbH & Co. KG based in Neumünster, GERMANY. from Low-Temperature Flares Product line

  • C-nox - Model HTV Support - High-Temperature Flares

    High-Temperature Flares for environmentally compatible combustion, lean gases require added support gas, such as natural gas or propane. Here again, the controlled gas/air ratio ensures the required combustion temperature of >1000 °C inside the combustion chamber. As a variation from the standard technology, in this flare type the required ...

    By C-nox GmbH & Co. KG based in Neumünster, GERMANY. from High-Temperature Flares Product line

  • C-nox - Model HTV Basic - High-Temperature Flares

    The controlled gas/air ratio in the combustion chamber ensures that a temperature of >1000 °C is always maintained in the combustion chamber. The flow rate in and the geometry of the combustion chamber ensure a minimum gas dwell time. During this time, any residual oxidizable compounds are oxidized as required in the German technical ...

    By C-nox GmbH & Co. KG based in Neumünster, GERMANY. from High-Temperature Flares Product line

  • Open/Elevated Flare System

    MRW Designs and manufactures the following elevated flare systems for all sizes and compositions of waste gas.

    By MRW Technologies, Inc. based in Glenpool, OKLAHOMA (USA).

  • Model FA II - Closed-combustion Automatic Biogas Flare

    The FAII biogas flare is an automatic, enclosed gas flare for combustion of biogas and other combustible gases, fully complying with the widely applied German air pollution regulation TA Luft.+500 references in more than 50 countries witness the robustness of our FAII flares!Available in a rage of 20 - 3.000 Nm3/h, at various pressures.Highly ...

    By Bilgeri EnvironTec GmbH based in Nüziders, AUSTRIA. from Closed-combustion Automatic Biogas Flare Product line

  • PBS - Model Flare NTF - Residual Gas Burner

    The PBS POWER EQUIPMENT, s.r.o. manufactures, installs and services atmospheric NTF type Flares used for combustion of residual biogas (resp. other combustible gas) mainly in cases of emergency stops of main consumers (cogeneration units).

    By PBS POWER EQUIPMENT, s.r.o. based in Trebíc, CZECH REPUBLIC. from Residual Gas Burner Product line

  • Hofstetter - Model HTF - High Temperature Flare

    The uncompromising solution for the environmentally friendly disposal of contaminated waste gases, The high temperature flare (HTF) disposes of contaminated gases and air using an efficient combustion process and in compliance with the latest regulations.

    By Hofstetter Gastechnik AG based in Hindelbank, SWITZERLAND.

  • NOXmatic - Automatic Gas Flare

    Our core business is the most up-to-date quality gas flare technology for a safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Our fully automatic flare NOXmatic with its extensive range of accessories can be suited for every low and medium temperature combustion application. With various ...

    By ennox biogas technology GmbH based in Hard, AUSTRIA. from Automatic Gas Flare Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you