Flares Equipment For Energy Management
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
High-Temperature Flares for environmentally compatible combustion, lean gases require added support gas, such as natural gas or propane. Here again, the controlled gas/air ratio ensures the required combustion temperature of >1000 °C inside the combustion chamber. As a variation from the standard technology, in this flare type the required quantity of support gas is added to the ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
The controlled gas/air ratio in the combustion chamber ensures that a temperature of >1000 °C is always maintained in the combustion chamber. The flow rate in and the geometry of the combustion chamber ensure a minimum gas dwell time. During this time, any residual oxidizable compounds are oxidized as required in the German technical circular on protection against air ...
-
based in THAILAND
All anaerobic plants must be equipped with a biogas flare, for safety reasons. GWE flares are designed to operate at low to medium pressure (<50 mbar), without the need for a biogas fan and for continuous burning in a wide range of biogas flows (5-100 %). This avoids the need for biogas storage systems (e.g. balloons) and keeps the biogas pressure in the reactor more or less ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97310T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97310T Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas ...
-
Manufactured by Inventive Gas Equipmentbased in INDIA
The iconic tower has redefined the London skyline and is already an international symbol for London. A mixed-use “vertical city,” it offers more than 55,000 square meters of office space on 25 floors, three floors of restaurants, a 17-story hotel, 13 floors of apartments and a triple-height viewing gallery, as well as an open-air viewing floor on level 72. It is crowned with a ...
-
Manufactured by Inventive Gas Equipmentbased in INDIA
Wheelock Square’s sleek, symmetrical lines and contemporary design elegance are combined as a singular, sculptural form rising from a richly landscaped plaza. The architectural solution responds to the adjacencies and energies of this major cultural and commercial intersection of Shanghai, taking into consideration the existing road, the neighboring Jing’an Temple, Children’s ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such as the EPA. ...
-
Manufactured by Guascor Energy S.A.U.based in SPAIN
Ideal for power generation, cogeneration/trigeneration, mechanical drive and marine applications – the lean burn, electronically carbureted SL gas engines have an output range from 209 to 1150 kWb at 50 Hz and 60 Hz. Providing an excellent solution when fueled by natural gas, landfill and sewage gas, flare and well gas, LPG& propane, syngas and also hydrogen, the SL Series is a ...
-
Manufactured by Zeeco, Inc.based in USA
Flare tips you can trust. Zeeco’s high-pressure VariJet™ flare tip assembly is carefully engineered to provide years of reliable and efficient service in challenging environments. Flare tip assemblies are repeatedly subjected to extreme temperatures, highly oxidizing atmospheres, and severe wind and rain. A poorly designed flare tip can be plagued by problems in these difficult ...
-
Manufactured by Environmental Express - Antylia Scientificbased in USA
The picture shows the flared end of the tubing on the ...
-
Manufactured by BKE Combustion Controls Co., LTD.based in THAILAND
BKE offers both enclosed and open type flaring solutions for biogas operations of all sizes. BKE Biogas Flare Systems are designed to perform their tasks to the highest industry standards of safety and reliability. All of our flares are CDM compliant to allow for maximum carbon credit gain. BKE designs and fabricates flares to accomplish your needs. Small or large, standard or custom, all are ...
-
Manufactured by AXI Internationalbased in USA
The FPS SX-F is a programmable, fully automated, fuel maintenance system that removes water, sludge, and other contaminants from fuel storage tanks through routine filtration. The system’s compact design allows for tight indoor installations such as inside gen-set enclosures or engine rooms. With a 2.5 GPM flow rate, the FPS SX-F can polish up to 1,200 gallons (4,543 liters) of fuel in a ...
-
Manufactured by Flame Smartbased in USA
With cutting-edge design, pilotless ignition, effortless controls and customizable features, the Flame Smart Ei3 is the industry leader in burner ...
-
Manufactured by Hero Flare LLCbased in USA
The Hero Flare Enclosed Vapor Combustors are an effective, efficient and economical alternative to achieving compliance with Guad-0 EPA regulations. As an industry flare/combustor leader Hero offers more Guad-0 EPA listed compliant combustors models than any other company Our combustors are designed to destruct VOCs (Volatile Organic Compounds) and other vapors produced from oil storage vessels. ...
-
Manufactured by Inventive Gas Equipmentbased in INDIA
Burj Khalifa has redefined what is possible in the design and engineering of supertall buildings. By combining cutting-edge technologies and cultural influences, the building serves as a global icon that is both a model for future urban centers and speaks to the global movement towards compact, livable urban ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 245 Fuel Efficient Flare Pilot is a high alloy, stainless steel pilot composed of fuel gas line, ignition line, inspirator and optional thermocouple. The pilot head assembly includes a 310 stainless steel flame retention nozzle and wind shroud for extended service life capable of sustaining a stable flame in winds of up to 150 mph. Fuel gas passes through an inspirator at the base of ...
-
Manufactured by ASHCORbased in USA
ASHCOR Standard Combustors are made of a stainless steel body and designed to withstand heavy wind, harsh oil and gas environments and other stringent conditions. Built to promote environment and site safety, ASHCOR Standard Combustors have distinct features such as minimal noise pollution and reduced radiant heat. Enclosed Flares are equipped with ASHCOR flame arresters and Flame Smart burner ...
-
Manufactured by ASHCORbased in USA
ASHCOR’s HCVC 500 are made of a stainless steel body and designed to withstand heavy wind, harsh oil and gas environments and other stringent conditions. Built to promote environment and site safety, ASHCOR’s HCVC 500 have distinct features such as minimal noise pollution and reduced radiant heat. Enclosed Flares are equipped with ASHCOR flame arresters and Flame Smart burner ...
-
Manufactured by Heartland Technology Partners, LLCbased in USA
The Heartland Concentrator featuring Flex-Heat uses the thermal energy from a variety of heat sources including gas turbines, reciprocating engines, and biogas flares to evaporate challenging industrial waste waters using an adiabatic process. Flex Heat™ is a key defining feature of Heartland’s technology and capability. As part of our commitment to environmentally responsible ...
-
Manufactured by Hilliard Emission Controls, Inc. / PURGITbased in USA
PURGIT designs and builds stainless steel air-assist and gas-assist mobile flares in several sizes – 2” to 6”. Our flares can be configured with blowers, knock-out drums, and flow meters for a variety of applications and are designed to set up on site in under 30 minutes. This picture shows a 6” gas-assisted, portable flare system. Ammonia, butane, propane, ethylene, VOC ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you