Flares Equipment For Energy Management
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Special Solutions for Preadmission Applications. The direct-drive GM ... dz blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas mixtures. Highly advanced and extremely robust Roots-type products. Available in a wide range of special materials and seals, such as ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares are individually customized, designed and calculated. All syngas flares have an own supporting burner ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Since the implementation of the Kyoto treaty the industry has seen a widespread development and tightening of regulations governing greenhouse emissions for the reduction of CO emissions. The issuing of the so called CO certificate not only calls for the Methane gas to be to be burnt in gas flares according to the UNFCC regulations, but also requires the logging and forwarding of the gas quantity ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The low-price solution for the price-conscious farmer! Robust and compact manual gas flare for burning off biogas at agricultural biogas plants. Perfect for smaller new plants and for retro fitting to existing biogas plants. The operation of the eco gas are with a fermenter pressure of 3 mbar is possible although a minimum operating pressure of 10 mbar is always recommended. The eco gas flare ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The NOXmatic comprises the most up-to-date quality gas are technology ensuring the safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Depending on the application parameters and the required combustion characteristics, the ares are supplied as either low or medium temperature units supplied with the required additional burner technology. ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Every year, millions of tons of household garbage and other refuse are deposited in landfills around the world. Biochemical decomposition processes of organic bonds in these landfills produce up to 150 – 250 m³ of landfill gases per tonne of household garbage. Due to a methane content of up to 60%, landfill gas ranks number six on the list of climate-disrupting methane producers ...
-
PremiumManufactured by Gazpack B.V.based in NETHERLANDS
Gazpack is all aware that gas flaring is becoming a major area of concern in today’s growing market where the emphasis is hugely focused on the negative environmental impacts and how we can change these practices quickly and efficiently. Therefore Gazpack has way to shut down flares without pollution. Blended flare quencher are applicable with a significant h2s content. In order to cut global ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular opto-electronic package for easy removal from ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The modern preparation of biogas to more efficient, use and transport friendlier biomethane becomes more and more popular. During preparation of the biogas, removal of CO2 and other basic components of the gas resutls in a dramatic change of the gas specific Wobbe Index and therefore new requirements for specification of the flare burner. ennox gas flares can be specially configured for the ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and smooth acting with low maintenance and high MTBF. It also offers ...
-
Manufactured by NRG Process Solutions (NRG)based in CANADA
An essential component of the flare system, Flare Knock Out Drums (FKOD’s) designed by NRG Process Solutions are as compact as possible, usually with a small building for the controls. The FKOD acts as a filter and separates liquids and solids from the gas stream, which prevents these substances from entering the flare system and causing damage to equipment or safety issues. Designed to ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
The HOFGAS-Efficiency high temperature gas flare provides safe and environmentally friendly high temperature combustion of landfill gas. The exhaust gas emissions meet the stringent ...
-
Manufactured by LTC Healthcarebased in UNITED KINGDOM
EXS Regular Condoms provide protection against pregnancy and sexually transmitted infections, including HIV. These condoms are characterised by an anatomical fit with flared head and teat tip. Thanks to their easy-on design, these condoms are easy to roll and ultra-comfortable to wear. Thinner than other regular condoms yet strong enough to provide ultimate protection, these condoms have a ...
-
Manufactured by Flare Products Limitedbased in UNITED KINGDOM
The control panel is responsible for controlling and monitoring the flare system. The set up and operation is the same for elevated, ground or skid mounted flares. Depending on specification and scope, the control panel can take many different shapes or forms. It will typically contain indication lamps, e-stop, isolator, selector switches, relays, ignition transformer, timers and temperature ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
Upper steam flare tips incorporate a high-stability pilot and a flame retention system. With a high efficiency, low noise steam injection ring, the flare tip provides smokeless burning with lower noise than traditional steam injection systems. The upper steam injection is mechanically superior in design while providing greater flow at lower steam ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UFU10 range of flares and gas utilisation equipment are generally tailored to suit the customer’s application and specific requirements and offer seamless control of the gas between its utilisation application and the flare stack. These units come in various sizes from 10 Nm3hr through to over 10,000 Nm3hr if ...
-
Manufactured by Gas Compressors Ltd (GCL)based in UNITED KINGDOM
Twin screw shaped meshing rotors are mounted in a figure of eight shaped housing, which has suction and discharge ports at either end. As the rotors turn they form a space that traps gas, the space travels down the length of the housing, and because of the profile of the screws, is compressed as it goes. Due to no lubricant in the compression space, timing gears are employed to ensure that the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you