Flares Equipment For Energy Management
-
Manufactured by Encore Thermoengineering S.R.L.based in ITALY
Derrick Guy-wired structure can be a good technical-commercial compromise for installation of flare packages very high in case of large clearance around the area and the need of a derrick structure to support the risers systems. The height of this type of flare can be even more than 200 ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...
-
Manufactured by INNIO Jenbacher GmbH & Co OGbased in AUSTRIA
Introduced in 1976, INNIO's Jenbacher Type 2 gas engine offers high efficiency power with a robust design. The stationary engine concept provides excellent durability, while enhanced components and a proven control and monitoring model give the Type 2 engine outstanding reliability. ~1,250 engines delivered since 1976. J208 – efficient L8-cylinders power generation solution for small/mid ...
-
Manufactured by Puti Energybased in INDIA
We supply Flare pilots, Burner pilot and any special pilot used for specific use with High Energy Ignition , flame sensor and Auto control. Long pilot Burner with proven ignition system is our ...
-
Manufactured by Ennovobased in AUSTRALIA
Our elevated flare range of open flare stacks provides a good degree of control over the combustion process in an elevated flame burner, whilst remaining highly flexible and portable. They are ideal for temporary or emergency mobile systems on landfill sites, or can be used at sewerage treatment works and other anaerobic ...
-
Manufactured by Gradko International Ltdbased in UNITED KINGDOM
PVC is one of the most widely used thermoplastic materials due to its preferential characteristics at a highly competitive price. The transparency of PVC materials allow continual visual monitoring of fluid flow and identification of bubbles. Properties of excellent acid and chemical resistance help to maintain the sterility of solutions. PVC tubing can also withstand high pressure contents and ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 255 pilot is a combination of our Model 245 pilot and Model 250 Energex pilot. The Model 255 pilot can be ignited using a flame front generator and/or the high-energy excitor (electronic sparking device). This pilot inherently provides redundancy in the event that one ignition system should fail to ignite the pilot for any reason. This pilot is a common selection in critical ...
-
Distributed by Vietnam Pros Technology Co., Ltdbased in VIETNAM
3M™ Acrylic Foam Tape PX5005 is designed for attaching exterior automotive trim to painted surfaces, without the time and expense of adhesion promoters. The .51 mm double-coated tape features the same adhesive on both sides for primerless application to LSE and MSE substrates and paints. Acrylic foam core is designed for robust performance even to complex contours and difficult paint ...
-
Manufactured by Encore Thermoengineering S.R.L.based in ITALY
Flare tips are available in various solutions, both in smokeless and nonsmokeless ...
-
Manufactured by Combustion Research Associatesbased in INDIA
Utility Flares are the simplest and most economical type of flaring systems that work well in applications that don't require smokeless burning or where smokeless burning is attained without assistance from air, steam or gas. Our highly engineered Elevated Utility flares are designed to withstand extreme conditions such as strong winds, high temperatures and oxidizing environments. Our ...
-
based in USA
The SmartCEMS® Flare Flow Monitor is a very reliable device consisting of a stainless steel pitot flow element in the stack and dynamic ranging difference pressure and temperature sensors. The flow monitor can be installed on any stack including flare stack or flare feed lines using a standard ANSI or ISO flange. The flow monitor along with the computation software and interface allows for ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
BF-3000 Ultrasonic Biogas Flowmeter can be commonly used with various industrial gas streams(biogas, natural gas, air, etc.), but with special design to enable it withstand the wet and corrosive gas conditions in biogas application. The built-in temperature and pressure sensors enable to make real time compensation and reach higher accuracy. The unique CH4 composition reading function requires no ...
-
Manufactured by Axiom Energy Group, LLC.based in USA
Axiom Energy Group has innovative technology that can eliminate natural gas flaring. Not only is it a win for the environment by reducing methane and CO2 emissions, but emissions captured from oil activities can be used for clean energy needs making this technology profitable, paying for itself within six months to two years. The profit potential that would otherwise go into the atmosphere can ...
-
Manufactured by Stortec Engineering Ltdbased in UNITED KINGDOM
STORTEC's experienced biogas team has been at the forefront of water and waste engineering innovation for more than 30 years. Our successful BIODOME® solutions have provided specialist answers to the unique challenges of biogas handling, storage and utilisation for organisations all over the world. Providing trusted service and asset management that goes beyond any other supplier. ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
Catalytic Combustion's Enclosed Combustor System is designed to safely burn combustible process vapors that have varying energy content. The advanced Enclosed Combustion System preheats like a direct fired thermal oxidizer. When the high BTU gas is introduced into the combustion chamber, the Enclosed Combustor turns off the supplemental fuel supply and maintains combustion temperature by ...
-
Manufactured by Flare and Vapor Systems Corpbased in USA
FAV Systems Integrated Solutions Inc. developed the FAV Systems Variable - Slot flare system to provide 100% smokeless, low radiation, low luminance flaring without the need for an air blower or other assist ...
-
Manufactured by AT – Automation Technologybased in GERMANY
The flaring of gas is a common process in petrochemical plants. However, there is always the challenge to ensure a 100% reliable operation of the flare because else a large quantity of untreated waste gases could be released into the atmosphere. To avoid such situations with environmental pollution and non-compliance to governmental regulations, AT offers a reliable 24/7 solution for monitoring ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Simply put – a pilot is continuous, it’s always on. The pilot flame serves to light the waste gas stream exiting the flare, or inside an incinerator, or any other combustion unit. You need to have an available fuel gas supply in order to install a continuous pilot. An ignitor (or ignition system) is an intermittent spark or flame front that is responsible for keeping the pilot lit. On ...
-
Manufactured by Wells Cargobased in USA
When you need to do some serious hauling, look no further than the FastTrac 8.5' wide cargo trailer. This trailer is ideal for hauling construction material, landscaping equipment, and even your favorite collector or race car! The FastTrac 8.5' wide offers plenty of standard features, including rear ramp door, two (2) dome lights, spring suspension axles (4" drop) and a 3/4" PlexCore floor. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you