Only show results available in Virginia? Ok

Flares services for Energy Management

  • Premium

    Flare Tip Retrofit Services

    With over 30 years of experience in manufacturing all types of flare systems, AEREON can provide you with economical flare tip replacements for all OEM makes of flare systems. From simple utility flare tip designs all the way to more complex steam flare tip systems typically used in downstream facilities, AEREON has proven engineering and ...

    By AEREON based in Austin, TEXAS (USA).

  • Flare Notification Services

    Caliber Planning delivers the industry’s most effective Rapid Flare Notification service, from obtaining an Alberta Energy Regulator (AER) flare permit to establishing the flare notification radius and notifying stakeholders.

    By Caliber Planning based in Calgary, ALBERTA (CANADA). from Emergency Services Service line

  • Process Modeling and Simulation Services

    PROCESS uses long-term or short-term licensed commercial process simulation software (CHEMCAD, Aspen, HYSYS, Pro/II, Simsci) and/or in-house simulation programs to perform: Detailed mass and energy balances. Unit operation design/evaluation. Piping system hydraulics calculations. Relief and flare system design/evaluation. Heat exchanger ...

    By Process Engineering Associates, LLC based in Oak Ridge, TENNESSEE (USA). from Types of Process Engineering Services Service line

  • Flare Gas Recovery Services

    COMM is the global leader in GHG reduction, flare gas recovery and conversion technologies.  Here are the seven pieces of the puzzle that we have in our toolbox. These are the reasons that COMM should be your GHG Service partner. As an alternative to purchasing equipment, COMM can provide the capital and resources to get the job done quickly.

    By COMM Engineering based in Lafayette, LOUISIANA (USA).

  • Process Burners Parts & Service

    When the unexpected occurs, John Zink Hamworthy Combustion’s parts and service team provides the total customer support you expect—no matter where you are. Whether you need replacement parts or emergency technical service, on-site equipment maintenance, operator training, start-up assistance or troubleshooting, our parts and service ...

    By The John Zink Institute based in Tulsa, OKLAHOMA (USA).

  • Ammonia and LP Gas Flaring Service

    PURGIT has the equipment to safely degas pressure vessels and pipelines anywhere in the country. Using an open flare with specially designed tips we can burn vapors from storage tanks, pipelines, rail cars, tank trucks, tank barges, ships, and various other pressure vessels. PURGIT has completed many tank decontamination and conditioning jobs ...

    By Hilliard Emission Controls, Inc. / PURGIT based in Houston, TEXAS (USA).

  • Flare Stack Design and Permitting Services

    Stack Design And Site Selection; We assist engineering firms by verifying the stack design and placement meets the applicable regulatory requirements and to minimize safety and environmental impacts.

    By Calvin Consulting Group Ltd. based in Calgary, ALBERTA (CANADA).

  • Plant Engineering Services

    We use only high-grade components and materials in our plants and products. Co-generation power plants with gas treatment, high-temperature flare stations, compressor plants, special gas utilisation or lean gas disposal ensure first-rate performance: High-end performance for power generation in various ranges from 75 kilowatts to 2 megawatts. ...

    By Pro2 Anlagentechnik GmbH based in Willich, GERMANY. from Expertise Service line

  • Gas Engines and Flare Stacks Services

    The European Landfill Directive has driven the mandate to both monitor and minimise landfill emissions, and to recover energy from landfills through the use of flare stacks and gas engines. Over many years EMCo has gained wide experience of these processes; this means our engineers can work efficiently to complete these projects. In so doing they ...

    By EMCo Air Quality Consultants Ltd. based in Eversley Hook, UNITED KINGDOM.

  • Additional Sources of Methane

    There are many sources of methane that can be used to produce biogas for alternative vehicle fuels like BioCNG. Examples include ‘sour gas’ in oil and gas sector, coal mine methane, and synthesis (syn) gas.

    By BioCNG, LLC based in Madison WI, WISCONSIN (USA). from Biogas Opportunities Service line

  • Flare Services

    leanAir has worked diligently since 2009 on flare services for the refining and chemical industries.

    By Clean Air Engineering, Inc. based in Palatine, ILLINOIS (USA).

  • Flare Monitoring

    Flare monitoring presents particular challenges due to the high temparture of the exhaust gas, the need to use intrinsically safe equipment in the vicinity of LFG infrastructure and the variability in the composition of LFG. SiteRight can ensure the reliablity of your flare emission data because we use the techniques specified in the UK ...

    By Siteright Environmental based in Enniskerry, IRELAND.

  • Flare Gas

    According to the latest estimates, about 150 billion cubic meters (or 5.3 trillion cubic feet) of natural gas is flared or vented every year - the equivalent of about 30 per cent of the European Union’s annual gas consumption. Apart from being a major waste of a valuable energy resource, gas flaring and venting also emits greenhouse gases ...

    By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Environmental Services Service line

  • Biogas Flaring

    Biogas What is Biogas? People have been using biogas for centuries: for instance in the 18th century biogas was drawn from the underground sewer pipes in London and burned in street lamps, which were known as 'gaslights' and in many parts of the world biogas is used to heat and light homes, to cook and even to fuel buses. It is now also collected ...

    By Wisterland based in London, UNITED KINGDOM.

  • Servicing & Repair

    We undertake repair and refurbishment of burnt / damaged flare tip of any make. During repair we add latest features of flare technology if possible in the refurbished item.flame front ignition systems often found non- functional if not used for long ; we repair and refurbish

    By Puti Energy based in Bhosari, INDIA.

  • Engineering

    Structural design and detailed fabrication/erection drawings for Steel Structures: - Power plant structures (Boilers, Heat recovery steam generator systems, Stacks) - Oil and gas structures (Pipe racks, Shelters, Derrick supported flares) - Cement industry structures ( Conveyor structures, Silo structures and supports) - Commercial and industrial ...

    By SPES DESIGN srl based in Bucharest, ROMANIA.

  • Core Compentencies

    Pörner Group provides the full range of engineering services both for new and refurbished process plants in the fields of: Refinery, Chemical Industry, Petrochemical Industry, Gas Industry, Energy & Environment, Production / Special technologies and Pharmaceutical Industry.

    By Pörner Ingenieurgesellschaft mbH based in Wien, AUSTRIA.

  • Process Modeling and Simulation

    INCBIO uses long-term or short-term licensed commercial process simulation software (CHEMCAD, Aspen, Hysis, Pro/II, Simsci) and/or in-house simulation programs to perform: Detailed mass and energy balances. Unit operation design/evaluation. Piping system hydraulics calculations. Relief and flare system design/evaluation. Heat exchanger ...

    By Incbio based in Maia, PORTUGAL. from Process Engineering Services Service line

  • Project Planning Services

    Our high-performance team of engineers guarantees successful project planning for turnkey plants. Our co-generation power plants, flare stations and compressor stations are specially tailored to meet our customers' unique requirements. Whether in existing buildings or in prefabricated containers - we provide optimum planning for your projects! We ...

    By Pro2 Anlagentechnik GmbH based in Willich, GERMANY. from Expertise Service line

  • Callidus Aftermarket Services

    Callidus Technologies provides full-service spare parts and retrofitting capabilities for all manufacturers’ equipment. We can replace existing components with Callidus parts or upgrade equipment to enhance performance. We recognize that the value of our equipment is dependent on performance. Our experienced field service personnel are ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you