Fuel Standards Equipment For Energy Management In Australasia
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
JP-5 Military Fuel Standard 10,000 μg/mL in methylene chloride, analytical ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
JP-4 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
JP-8 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The Sirocco is our smallest and most portable waste incinerator and has been designed to be easy to relocate and use almost anywhere. Requiring just a small amount of electricity to power the fan - no other fuel source is required. The efficient process reduces waste to as little as 3% of its initial volume. It uses cyclonic air technology by using the high-pressure fan to pull air into the main ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame ...
-
Manufactured by Cla-Valbased in USA
The Cla-Val Model 341GF-D3 Nozzle is an “underwing” refueling nozzle for pressure fuel servicing of a wide range of military aircraft and for bottom loading of taank trucks. The Model 341GF-D3, fitted with the D-3 Swivel Inlet, replaces both the D-1 and D-2 nozzles. The 341GF-D-3 Nozzle is equipped with a unique inlet assembly that adjusts to connect to adapters located on the ...
-
Manufactured by Sigma-Aldrichbased in USA
JP-8 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical ...
-
Manufactured by Zeeco, Inc.based in USA
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of the most in-demand flares of its kind for punishing conditions that include extreme ...
-
Manufactured by Major Furnace Australia Pty Ltdbased in AUSTRALIA
Major has a range of incinerators to suit your needs, either solid waste, animal, pathological or biomedical, our incineration systems comply with the most stringent environmental standards. Industrial Process Odours and VOC Destruction can be achieved using our Afterburners and Thermal Oxidizers, refer to the Process section for more ...
-
Manufactured by 2G Energy AGbased in GERMANY
The degree of ecological compatibility required of energy production is increasing around the globe. Especially in urban areas, there often are strict emission limits. Our response: aura. Thanks to its enormous efficiency, this model guarantees highly efficient fuel use while setting standards in avoiding the emission of nitrogen oxides. This powerful module in the range of 100 to 420 kW is ...
-
Manufactured by Zeeco, Inc.based in USA
The ZEECO® GLSF Enhanced Jet burner is an ultra-low emissions flat flame burner. The above pictures display GLSF flat flame burners in operation in an ethylene cracking furnace. The design allows for flat flame burners to achieve a superior heat flux profile without flame rollover. A major advantage is that the heat flux profile can be changed as required for the specific application with ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers for tankers and ...
-
Manufactured by Sigma-Aldrichbased in USA
JP-5 Military Fuel Standard 10,000 μg/mL in methylene chloride, analytical ...
-
Manufactured by Pyrotech Energybased in AUSTRALIA
Pyroflash technology is unique in simultaneous production of several qualities of bio-crude oil. Normally we distinguish these oils between two qualities: Dry Oil (3w% water content) and Wet oil (20w% water content). The Dry oil has an HHV of 24 MJ/kg and the Wet oil has an HHV OF 17 MJ/kg. The Wet oil is liquid at room temperature, whereas the Dry oil is solid in room temperature. ...
-
Manufactured by SAACKE GmbHbased in GERMANY
With the CCS-HT combustion chamber series, SAACKE offers standardized hot gas generators in a wide load range. Proven thousands of times in real applications, they are suitable for all standard fuels as well as numerous special fuels and can be used to operate any SAACKE burner in almost any installation ...
-
Manufactured by Ecoflam Bruciatori S.p.A.based in ITALY
Aluminium casing up to MULTICALOR 200.1 and steel casing from 300.1 with electrical panel integrated on board. Adjustable combustion head for fine-tune regulation and matching with different combustion ...
-
Manufactured by Sigma-Aldrichbased in USA
JP-4 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you