Fuel Standards Equipment For Energy Management In Latin America
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
JP-5 Military Fuel Standard 10,000 μg/mL in methylene chloride, analytical ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
JP-4 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
JP-8 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) sensor which reacts specifically ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The Sirocco is our smallest and most portable waste incinerator and has been designed to be easy to relocate and use almost anywhere. Requiring just a small amount of electricity to power the fan - no other fuel source is required. The efficient process reduces waste to as little as 3% of its initial volume. It uses cyclonic air technology by using the high-pressure fan to pull air into the main ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame ...
-
Manufactured by Zeeco, Inc.based in USA
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of the most in-demand flares of its kind for punishing conditions that include extreme ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
This burner works with oxygen instead of air. After commissioning with a support fuel such as natural gas or heating oil, this burner works with almost any combustible fuel. This process can be retrofitted without having to install a new burner block in the existing combustion chamber. With the special PreCOMB muffle system, it is possible to run additional fuel ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
Designed specifically for operation with preheated combustion air, this burner series can have combustion air temperatures above 350°C up to 600°C. The air box of this burner is lined with fireproof concrete to prevent overheating - and above all to prevent unacceptable expansion - of the burner ...
-
Manufactured by Sigma-Aldrichbased in USA
JP-8 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical ...
-
Manufactured by Zeeco, Inc.based in USA
The ZEECO® GLSF Enhanced Jet burner is an ultra-low emissions flat flame burner. The above pictures display GLSF flat flame burners in operation in an ethylene cracking furnace. The design allows for flat flame burners to achieve a superior heat flux profile without flame rollover. A major advantage is that the heat flux profile can be changed as required for the specific application with ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SAACKE steam pressure atomizer is designed for firing medium and large sized water tube boilers such as auxiliary and main boilers for tankers and ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
This burner represents the latest development of our standard burners and was specially designed for use on rotary kilns and post-combustion ...
-
based in BRAZIL
Verana Diesel fuel is impressive even in its smallest details. It is aromatized, allowing for more onboard comfort, and is the most appropriate for leisure activities.The advanced technology applied in the Verana diesel fuel additives protects the engine against corrosion, avoids the formation of deposits on the injector nozzles, and considerably reduces foaming, allowing for more complete tank ...
-
Manufactured by Sigma-Aldrichbased in USA
JP-5 Military Fuel Standard 10,000 μg/mL in methylene chloride, analytical ...
-
Manufactured by SAACKE GmbHbased in GERMANY
With the CCS-HT combustion chamber series, SAACKE offers standardized hot gas generators in a wide load range. Proven thousands of times in real applications, they are suitable for all standard fuels as well as numerous special fuels and can be used to operate any SAACKE burner in almost any installation ...
-
based in BRAZIL
The aircraft that fly in the Brazilian airspace are supplied at the airports and air clubs in Brazil with our fuel, world-renowned in the aviation segment. As the only producers in the domestic market, we market kerosene and aviation fuel to the distributors and guarantee not only the delivery, but the quality of these products pursuant to the best international ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
Originally, the SWP burner was developed in order to be able to offer an optimised body design for pressure applications. The simple shape of the burner case, composed of mainly cylindrical and conical shapes, allows the construction of a cost-effective and material-optimised burner for pressure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you