Gas Burners Equipment For Energy Management In Australasia
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Mini-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) is Zeeco’s GLSF Min-Emissions down-fired burner firing with Refining Fuel Gas in the outer tips and PSA gas in the center tip. This design provides a flame shape that is normally the same width as the outside diameter of the burner tile allowing the burners to be installed in close ...
-
Manufactured by Entech - Renewable Energy Solutions Pty Ltd.based in AUSTRALIA
WtGas is the core technology of the Entech-Tru-RES™. It’s based upon a low temperature gasification process that converts waste from its solid to gaseous form of syn-gas (a methane like gas), so that it can be fired to generate energy; with emissions that are cleaner than firing of any fossil fuel (including natural gas!). The WtGas renewable energy system adopts ENTECH™ ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Min-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) shows Zeeco’s GLSF Min-Emissions round flame burners in operation .The design allows for a compact flame shape which is basically the width of the burner tile making Zeeco’s burners a great choice for applications that require the burners to be mounted close together or far apart while ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical atomization which ensures the mixture is a fine ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco CLSF Min-Emissions burner is an Ultra-Low NOx emissions round flame combination burner.The picture (right) is Zeeco’s CLSF Min-Emissions combination burner in operation. The reduced NOx emission from oil firing is achieved by “Pseudo Staging” of oil by our CB oil gun design. The result is a burner that can achieve very low NOx emissions with a great turndown. For ...
-
Manufactured by Advanced Combustion Engineeringbased in AUSTRALIA
Advanced Combustion Engineering 'Controlled Air Incinerators' are primarily designed for batch operation with a burning cycle of approximately two hours and a cooling cycle also of approx, two hours, depending upon the density and calorific value of the waste. Unlike conventional multiple chamber incinerators which have large quantities of excess air, a controlled air incinerator uses less than ...
-
Manufactured by Ecoflam Bruciatori S.p.A.based in ITALY
Two stages progressive mechanical gas / Two stages progressive mechanical light ...
-
Manufactured by VDM Metals International GmbHbased in GERMANY
Modern day key industry components are often exposed to high and highest temperatures and require the use of innovative high-temperature alloys. These usually heat-resistant or high-temperature materials have found a wide range of applications not only in furnaces and heat treatment plants, but they are also used as a substrate material for heavily stressed metallic catalysts. Other typical ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
This burner is suitable for use with both light oil and kerosene with single stage on/off operation. Available for both conventional and ducted air options and is typically suitable for domestic and commercial hot water boilers, air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, Trianco and ...
-
Manufactured by Muntersbased in USA
VariMax IFRG combines Des Champs Products heat-exchanger design with indirect heating technologies to deliver contaminant-free process air with very high efficiency. Recirculation of the combustion gases allows the heater to attain an efficiency of 90%, 1,000°F (555°C) temperature rise, 1,200°F (649°C) discharge temperature, and a 40:1 ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Min-Emissions Enhanced Jet burner is an Ultra-Low emissions flat flame burner.The picture (right) is of Zeeco’s GLSF flat flame burners in operation in an ethylene cracking furnace. The design allows for flat flame burners to achieve a great heat flux profile without flame rollover. A major advantage is that the heat flux profile can be changed as required for the specific ...
-
Manufactured by Forney Corporationbased in USA
Forney in Conjunction with Storm Technologies brings you the Eagle Air II Burner! Need the ability to fire both coal or natural gas so your plant can take advantage of the most cost effective fuel option? Eagle Air II is a Wall-Fired-Boiler Dual-Fuel Burner that gives you that ...
-
Manufactured by Ecoflam Bruciatori S.p.A.based in ITALY
Aluminium casing up to MULTIFLAM 200.1 and steel casing from 300.1 with electrical panel IP54 on board. Adjustable combustion head for fine-tune regulation and matching with different combustion ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SA ACKE TEMINOX GL burner combines all the benefit s of a modern combustion plant . It is designed for industrial heat and steam generation. It s ef ficient and low-pollut ant combustion complies with the most stringent NOX emissions requirements in place with a low CO and residual oxygen content in the exhaust ...
-
Manufactured by Ecoflam Bruciatori S.p.A.based in ITALY
All burners feature high versatility on different types of domestic, commercial and industrial ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
These burners are available for use on natural gas, LPG, towns gas and biogas ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
This burner is suitable for use on natural gas and LPG (Towns gas and biogas on request) ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you