Gas Burners Equipment For Energy Management
-
Manufactured by Ship & Shore Environmental, Inc.based in USA
Ship & Shore Environmental helps you to analyze your current energy usage and offers you ways to reduce consumption. We audit energy flow and energy consumption during the operation for optimizing air flow of the systems. Implementing secondary heat recovery systems helps to optimize process and plant heating/cooling systems. In areas where you need heat for building /other operations heat ...
-
based in NETHERLANDS
Heating for every crop KG Greenhouses can provide heating and cooling for any crop, with the goal of lowering heating costs at the forefront of every design. This is accomplished, among other things, by incorporating heat sources such as geothermal energy, biomass, and solar ...
-
Manufactured by Venlo AP Holland Groupbased in NETHERLANDS
Venlo pays special attention to the design and installation of the boiler room system. Components are sized and tuned for optimum efficiency. We can connect the heating system to existing boilers, modernize the existing boiler room using our design, or deliver a brand new boiler room ...
-
Manufactured by ONEJOON GmbHbased in GERMANY
Reliable high-tech solution for a variety of continuous and discontinuous processes. The ONEJOON rotary drum furnace is the optimal solution for processes and applications where high mass throughputs are to be heat treated homogeneously at high temperatures. The rotary drum furnace's robust design allows the processing of a wide range of raw materials under various atmospheres. Powdery and lumpy ...
-
Manufactured by ETTER Engineering Company, Inc.based in USA
The ETTER Engineering ControlWorx SBCP 1000 is a single burner control panel that provides basic flame supervision to a single gas-fired, pilot ignited burner. The High Temperature Limit instrument monitors furnace temperature and will shut down the burner if the measured temperature exceeds the instrument’s set-point, as well as setting of an alarm buzzer to annunciate a flame failure. ...
-
Manufactured by Fuel Tech, Inc.based in USA
Low NOx burners and Low NOx burner Upgrades are available for both industrial and utility boilers burning a wide variety of fuels and have proven to be a cost effective way to reduce NOx emissions by 40% - 60%. Each system application is specifically designed to maximize NOx reduction without sacrificing combustion performance or unit operation. Computational Fluid Dynamics (CFD) combustion ...
-
Distributed by EX-FACTORY INCbased in USA
One wood drying system consisting of the following described NEW items:New EX-FACTORY (8.5 ft x 25 ft) triple-pass rotary drum dryer with the following items:Trunion bases and trunion wheels;Drum drive with drive motor, Drum discharge fan with fan motor;Receiving cyclone with airlock and airlock drive motor and cyclone stand.Operator's Controls.Motor Control Center (MCC) with motor ...
-
Manufactured by CEBA S.r.l.based in ITALY
CEBA can supply complete combustion plants according to Customer’s specifications and main international standards, focusing mainly ...
-
Manufactured by Nu-way Enertech Limitedbased in UNITED KINGDOM
This burner is suitable for use with both light oil and kerosene with single stage on/off operation. Available for both conventional and ducted air options and is typically suitable for domestic and commercial hot water boilers, air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, Trianco and ...
-
Manufactured by Clean Combustion Technologies ABbased in SWEDEN
Clean Combustions High Performance Rotary Kiln Burner systems have been designed for energy intense industrial applications. Through active innovation and modular design we ensure each system provides improved efficiency and reliability. With over six decades of operational experience and two in research, innovation and design we offer unique customised solutions with the highest efficiency, ...
-
Manufactured by IBS Industrie-Brenner-Systeme GmbHbased in GERMANY
CONEFIRE® - process burners are available from 100 kW for gaseous and liquid heating fuels as well as dual-fuel burners. CONEFIRE® process burners are having a wide turn-down of 40:1 (near- stoichiometric 10:1). Due to their reliability and low-emission combustion, CONEFIRE® process burners have become a first choice burner for plate dryers, drying furnaces and post-combustion ...
-
by McBurneybased in USA
The furnace and the boiler are designed for the specific requirements of the fuels to be fired and boiler operating conditions. The furnaces are conservatively sized to improve fuel combustion and burnout, reduce particulate emissions carryover, and provide low furnace volume heat release rates. ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen (O2) and fuel in premix gases, operating in either excess fuel or excess air conditions. It has the capability to measure the air/fuel ratio in open-flame applications where flue gas measurements are not practical, with measurement and display options including excess O2, excess fuel, oxides/fuel ratio and ...
-
Manufactured by Bryan Boilers Div. - Bryan Steam LLCbased in USA
Straight gas atmospheric fuel firing hot water or steam boilers. multi-phase flue gas travel for maximum heat extraction. capacities from 3,500 mbh input (84 bhp output) to 6,500 mbh input (155 bhp ...
-
Manufactured by Puti Energybased in INDIA
We specialize in low calorific value gas burners, burners are available for blast furnace gas, producer gas, mixed gas; synthetic gas both direct fired and regenerative burner. Biogas fired boiler burner can be supplied ex-stock. We also produce special burners for client including incinerator burner with large heat output. Refurbishing , start-up services for any make burner can be done with our ...
-
Manufactured by FlammaTec, spol. s r.o.based in CZECH REPUBLIC
FT FreeJet gas injector-type burner creates extremely low gas impulse that slows down the combustion process and increases soot formation. It leads to optimal heat transfer from combustion to the glass melt, improved furnace efficiency, maximum pull and extremely low emission when replacing conventional ...
-
Manufactured by Santin SRL - Industrial burnersbased in ITALY
BFSR is the new self-recuperative burner from Santin Burners. BF-SR for direct and indirect heating, allow to get energy-saving operation thanks to integrated ceramic and metallic heat exchanger. Modular design allows an easy maintenance and ...
-
Manufactured by Burn-Easy R&K Incinerator, Incbased in USA
Dimensions 36 in. diameter x 7 ft. length. 375 tank thickness. Reinforced with 2x1 solid bar. Load capacity 700 lb. 35 cubic foot chamber. Diesel, Propane, or Natural Gas Burner option. Voltage requirements 120 volt 60 HZ 20 Amp. Adjustable 12 hour timer. Unit is lined with repairable refractory block rated for 3000 degree temperature. Door is lined with 3 inches of ceramic fiber insulation rated ...
-
Manufactured by Osby Parcabased in SWEDEN
Robust boiler based on reliable technique with high degree of efficiency. The Osby Parca GTP has a cylindrical furnace and a tube equipped convection section where the flue gases pass in two strokes without turbulators. The boiler is of welded steel and the the furnace, the turning chamber and the convection tubes are completely water cooled. The boiler is self-circulating, this treat provides an ...
-
Manufactured by Thermal Lining servicesbased in INDIA
Design of this waste incinerators is typical. Solid waste has built in carbon which supports self combustion if it is loaded in the chamber where temp of 750 c is maintained. Hence we maintain the loading chamber temp to 750 C through Automatic Gas Burner, at this temp waste release its in built Heat and raise temp of chamber to 850 C. Thus waste is incinerated by self support Heat in primary ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you