Only show results available in Virginia? Ok

Gas Combustion equipment for Energy Management

  • Premium

    ACME - Model C-520 Series - Electric Hot Water Boilers

    Acme electric boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Electric Hot Water Boilers Product line

  • Premium

    ACME - Model GS Series - Gas Fired Steam Superheaters

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Fired Steam Superheaters Product line

  • Premium

    MCZ - Model MicroCal5000 - Gas Compounding System

    Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production processes.

    By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Gas Compounding System Product line

  • Premium

    AEREON - Dynamic (Velocity) Purge Seal

    The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air ...

    By AEREON based in Austin, TEXAS (USA). from Dynamic (Velocity) Purge Seal Product line

  • Premium

    AEREON - Knockout Drum

    Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. ...

    By AEREON based in Austin, TEXAS (USA). from Knockout Drum Product line

  • Premium

    AEREON - Liquid Seal Drum

    The liquid seal drum is a specially designed vessel containing a predetermined level of water in the base of the drum. The main purpose of the liquid seal drum is to stop flame propagation in the unlikely event of flashback. The liquid seal also acts as a large check valve so that gas can not travel upstream for any reason. A third function of the ...

    By AEREON based in Austin, TEXAS (USA). from Liquid Seal Drum Product line

  • Premium

    GE Jenbacher - Model Type-6 - Gas Engine

    Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Gas Engine Product line

  • Premium

    IMR - Model 6000 - Oxygen / Excess Air Combustion Controller

    The IMR 6000 is an oxygen / excess air combustion controller to measure, store and control oxygen (02) in a combustion process. The analyzer works with all sorts of fuel (liquid fuels, gas and solid fuels) and calculates C02, combustion efficiency and measures the flue-gas temperature with a separate thermocouple probe. The IMR 6000 can be ...

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA). from Oxygen / Excess Air Combustion Controller Product line

  • Fluidised Bed Combustion System

    Improved Cost-Effectiveness Thanks to Optimized Design and Improved Materials. The Inova fluid bed has many advantages compared to the multiple hearth: Uniform bed temperature and high bed turbulence result in low excess air requirements and low formation of pollutants. Optimized fluidization, distribution, and residence time allow for efficient ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Fluidised Bed Combustion System Product line

  • Biogasmart - Model EMR - Advanced - Flare Stack

    EMR-Advanced flare is a safety device typically installed in biomass plants where there are no specific restrictions relevant to fumes exhaust height, minimum combustion temperature, and a partially visible flame is accepted. All the equipment is fitted on-board, contained in a stainless steel frame which simple design and small footprint allow ...

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Advanced - Flare Stack Product line

  • Model DG400 - Direct Fired Heater

    Heavy-duty frame with wheels and lifting hook. Changes from vapor propane to natural gas with a turn of a valve. Low amp draw (5.0/8.5). Ductable up to 50’. High CFM axial fan. Air switch protected by 30 mesh filter. Optional remote thermostat with 50’ of cord. Optional delay start relay. Capable of continuous ventilation with ...

    By Heat Wagon, Inc. based in Valparaiso, INDIANA (USA). from Direct Fired Heater Product line

  • Model VAPOR-D type - Steam Generator

    Varor-D is the new generation of gas/oil fired 3-pass Steam Generator with 0.6 to 8 tn/h capacity of saturated steam at pressures up to 40barg

    By Hephaestus Group based in Kalochori, GREECE. from Steam Generator Product line

  • Gas Hose

    The material of the hose is PVC, with flexibility, excellent combustion prevention,resist aging, erode resistant, suitable for the connection of the gas cooker. The styles are single layer, double layers and three layers; the color of each layer is different. Smooth or stripe surface can be with the printing. External diameter: ...

    By Jitone Hose Co.,Ltd based in Jiangmen, CHINA.

  • Energimizer - Model EM 100NG - Natural Gas Fired Combined Heat and Power System

    Electrical power: 50 KWe - 105 KWe. Thermal output: 138.5 kW. Fuel: Natural gas. Efficiency: 87.9%. Flow temperature max: 92 ° C. Return temperature max: 40 ° C. Fuel Consumption: 282 kW.

    By Energimizer - a brand by based in East Kilbride, UNITED KINGDOM. from Natural Gas Fired Combined Heat and Power System Product line

  • Model OHA - Radiant Strip Heating System

    OHA RHE “Radiant High Efficiency” is a technologically innovative gas combustion unit for heating large spaces. The OHA RHE radiant strip system provides uniform heat throughout the entire radiant circuit, thanks to its continuous heat output modulation, heating the environment uniformly to achieve maximum efficiency. The circuit ...

    By Systema S.p.A. based in Giustina in Colle – Padova, ITALY. from Radiant Strip Heating System Product line

  • CataStak - Gas-Fired Turbines

    Similar to other combustion processes, the primary pollutants of gas turbines include NOx and CO. For turbines with heat recovery, the exhaust temperature can drop below 300°F. With those factors in mind, it only made sense that Nationwide Boiler developed CataStak™ SCR system technology for gas turbine applications.

    By Nationwide Boiler Inc. based in Fremont, CALIFORNIA (USA). from Gas-Fired Turbines Product line

  • Combustion Systems

    MRW builds high quality combustion equipment and combustion systems for VOC destruction. Our product lines include flares, oxidizers, and combustors. All of MRW's combustion equipment systems are designed to meet the highest standards of operation, safety, and VOC destruction efficiency. The principals of MRW have a combined 100 years experience ...

    By MRW Technologies, Inc. based in Glenpool, OKLAHOMA (USA).

  • Flares for Oil Associated Gas and Flash Gas

    During oil and natural gas production, associated gases accrue. Due to their amount, composition and chemical properties, they cannot be used for energy generation. These gases can be completely oxidized in c-deg high temperature flares (incinerators) at a temperature up to 1,200 °C. This minimizes their environmental impact while meeting (or ...

    By C-deg environmental engineering GmbH based in Kiel, GERMANY.

  • Diesel and Gas Engines

    Sandfirden Technics supplies industrial 4-stroke internal combustion engines with fixed or variable RPM. The range comprises both standard and custom-made engines. Their most important benefits are reliability, competitive prices and performance, plus the fact that standard versions can usually be supplied straight from stock. Even worldwide.

    By Sandfirden Technics BV based in Den Oever, NETHERLANDS.

  • Ecochimica - Model CR Series - Combustion Plant Regenerative Combustion Plant

    Operating Principals: The plant basically consists of three vertical chambers filled of high thermal capacity ceramic material (a preheating inlet gas chamber, a heat recovery of purified gas from combustion chamber and a cleaning chamber with fresh air) and a combustion chamber with modulating burner that connect up the 3 chambers. The gas with ...

    By Ecochimica s.r.l. based in Creazzo (VICENZA), ITALY. from Combustion Plant Regenerative Combustion Plant Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you