Gas Combustion Equipment For Energy Management In Africa
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for vehicles with the cake produced, used ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Infilco Degremont has supplied more fluid bed incineration systems in North America than any other vendor. Our specialized incineration experts were recently awarded a U.S. patent for inventing a method to remove mercury and nitrogen oxides from combustion flue ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for vehicles with the cake produced, used ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
This option incorporates the incineration facility permanently mounted within a standard modified ISO 20’ or 40’ container, enabling the incinerator to be delivered fully assembled for immediate ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Integrated Flow Solutions, Inc. DXPbased in USA
Integrated Flow Solutions Heat Transfer/Hot Oil Systems are designed to store and transfer heat transfer fluids used for industrial heating. The heat transfer fluid is normally stored in an elevated insulated vessel skid mounted. Special high temperature centrifugal pumps are used to circulate the heat media fluid from the storage tank through an electric process heater, gas fired heater or ...
-
Manufactured by Henan Doing Machinery Equipment Co., Ltd.based in CHINA
Whatsapp/Tel: 008613526692320 oilmachine@wastetireoil.com A fully continuous tire oil pyrolysis processing line is a system designed for the recycling of waste tires through a process called pyrolysis. In the case of tire pyrolysis, waste tires are heated to a high temperature in a reactor, resulting in the breakdown of the tire materials into various by-products, including fuel oil, carbon ...
-
based in NORWAY
Aker Clean Carbon is leading SOLVit – a major scientific research and development programme to produce improved, cost-effective amines for the CO2 capture process. This eight-year NOK 317 million programme was launched in 2008 together with Sintef, an independent research organisation, and the Norwegian University of Science and Technology ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat & power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are typically ensilaged and stored in clamps or ...
-
Manufactured by Elecnorbased in SPAIN
With over thirty years of experience in this industry, and consistent with its strategy of diversification, Elecnor has evolved into one of the leading suppliers of gas related services, covering everything from gas pipeline transportation to domestic ...
-
Manufactured by Perry of Oakley Ltdbased in UNITED KINGDOM
The Perry Belt Drier is ideally suited to drying almost any non-flowing product or more granular products that require a lower throughput capacity. Popular applications have included biomass, anaerobic digestate, grass & ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
The Addfield De-NOx systems involves the use of Urea – a common, widely available harmless fertiliser to neutralise nitrogen oxides (NOx) formation. NOx is widely problematic in coal plants and diesel vehicles and similarly more commonly found in high capacity diesel incineration ...
-
Manufactured by Muntersbased in USA
VariMax IFRG combines Des Champs Products heat-exchanger design with indirect heating technologies to deliver contaminant-free process air with very high efficiency. Recirculation of the combustion gases allows the heater to attain an efficiency of 90%, 1,000°F (555°C) temperature rise, 1,200°F (649°C) discharge temperature, and a 40:1 ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you