Gas Combustion Equipment For Energy Management In Canada
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...
-
Manufactured by Combustion Technologiesbased in USA
Combustion Technologies has some great design engineers and fabricators to offer many options of Filtration Carts for diesel fuel storage, hydraulic tanks, engine oil bulk tanks, gasoline storage, gear boxes and more. If you cannot mount a permanent filter system or by-pass filter to your equipment, a filter cart is the way to go. Many models available for all sizes of sumps and ...
-
Manufactured by Reivax North America, Inc.based in CANADA
MagBox Vision uses the concept of “all in one” to optimize the design of new power plants, minimizing the investment required and reducing engineering, production, installation and commissioning time. The MagBox Vision is assembled and factory integrated with their systems fully tested before shipment. With MagBox Vision, the entire scope of electrical systems is managed by a single ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...
-
by Zeton Incbased in CANADA
Get your process technology to market with fully scalable solutions. A demonstration plant can generate significant quantities of your product for market testing and may be used together with a pilot plant to support ongoing operations and optimization of a commercial-scale unit. Collaborating with the right partner can make all the difference in propelling your technology forward to ...
-
Manufactured by Maxim Power Corp.based in CANADA
The Milner 2 (“M2”) power plant is currently a 300 MW state-of-the-art Combined Cycle Gas Turbine (“CCGT”) unit located at the HR Milner Generating Station near Grande Cache, Alberta. The M2 CCGT unit benefits from significant existing infrastructure at the brownfield site, including the existing M1 steam turbine generator and the associated balance of plant, capturing ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air ...
-
Manufactured by Applied Compression Systems (2023) Ltd.based in CANADA
Horsepower: 40 – 750 HP. Max. Discharge Pressure: 300 PSIG. The Vector 6200 Series is our premium single stage rotary screw gas compressor package and is designed specifically for applications requiring a high level of control and where an electronic interface is required between the control valves and the compressor control ...
-
Manufactured by Carrier Vibrating Equipment, Inc. / Carrier Europe S.C.Abased in BELGIUM
Non-Vibrating Tornesh Dryer including: All stainless steel construction. Screw conveyor with 2 HP motor for feeding ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be placed at lower, less visible elevations, allowing for ...
-
Manufactured by CMI Groupebased in BELGIUM
Listening to your requests, analyzing your needs, and engineering your Heat Recovery Steam Generators (HRSG) according to your project specifications: this is CMI's credo! CMI offers boiler turnkey ...
-
Manufactured by Ship & Shore Environmental, Inc.based in USA
Ship & Shore Environmental helps you to analyze your current energy usage and offers you ways to reduce consumption. We audit energy flow and energy consumption during the operation for optimizing air flow of the systems. Implementing secondary heat recovery systems helps to optimize process and plant heating/cooling systems. In areas where you need heat for building /other operations heat ...
-
Manufactured by Cleaver-Brooksbased in USA
The ClearFire-H is a compact horizontal, gas-fired, steam boiler designed for all of your steam heating and process needs, available in ten sizes. The AluFer® tubes with extended fireside heating surface provide maximum heat transfer for superior performance with a small installed footprint The premix burner automatically adjusts the air/gas mixture without the use of additional controls for ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 250 Energex Pilot is a high alloy, stainless steel pilot which combines a high voltage electronic excitor and a high energy spark rod to provide rapid, reliable ignition. More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other standard pilots, however instead of a flame front ...
-
Manufactured by Thomson Power Systems member of Regal Beloit Corporationbased in CANADA
Series 2200 generator control switchgear line represents 40 years of product development and system design ...
-
Manufactured by Carrier Vibrating Equipment, Inc. / Carrier Europe S.C.Abased in BELGIUM
Carrier vibrating fluid bed thermal dryers are typically used for coals with a larger size fraction, such as run-of-mine coal. Carrier offers vibrating fluid bed units up to 8 ft. wide x 50 ft. long with capacities up to 250 TPH in a single unit, depending on the thermal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you