Gas Combustion Equipment For Energy Management In Massachusetts
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
Manufactured by Thomson Power Systems member of Regal Beloit Corporationbased in CANADA
Series 2200 generator control switchgear line represents 40 years of product development and system design ...
-
Manufactured by Smith Cast Iron Boilersbased in USA
The GC160 series gas-fired condensing boilers offer high efficiencies in a convenient space-saving wall mounted package. Utilizing a patented parallel flow heat exchanger and state of the art premixair/gas modulation firing system for optimal combustion, GC160 boilers offer efficiencies of 93%. Units are offered in both “combi” and “boiler only” ...
-
Manufactured by Kidde-Fenwal, Inc.based in USA
The CARDOX Low-Pressure Carbon Dioxide (LP CO2) System is a proven solution when used to protect areas that require multiple suppression cycles, expansion capabilities, numerous hazards or more than 5000 lbs of CO2. CO2 is an odorless, colorless, inert gas that extinguishes fire primarily by diluting the oxygen that supports combustion. It is applied by either the “total flooding” or ...
-
Manufactured by Smith Cast Iron Boilersbased in USA
The GVX gas-fired residential boiler combines application flexibility with high efficiency. The power vent feature positively vents the flue gases outdoors which provides safe, dependable operation. The GVX is available in 4 sizes ranging from 70 to 165 MBH with efficiencies of up to 82% ...
-
Manufactured by Muntersbased in USA
The VariMax™ OTH (Once-Through Heater) is a high efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion. The OTH is well-suited for recirculating ovens, dryers, makeup-air applications in cold environments, and industrial processes with moderate temperature rises. The counterflow configuration, ...
-
Manufactured by Muntersbased in USA
The GA Air Heaters are designed for cost effective heating solutions in a wide variety of applications, including greenhouses, poultry houses and other livestock structures. All models function on the principle of direct fired gas heating. Hereby a powerful fan is used to force air through a combustion chamber where the burner is situated. As the air passes through the burner, all the heat ...
-
Manufactured by Muntersbased in USA
The GA Air Heaters are designed for cost effective heating solutions in a wide variety of applications, including greenhouses, poultry houses and other livestock structures. All models function on the principle of direct fired gas heating. Hereby a powerful fan is used to force air through a combustion chamber where the burner is situated. As the air passes through the burner, all the heat ...
-
Manufactured by Smith Cast Iron Boilersbased in USA
The Smith GSX gas-fired residential boilers are designed to provide dependable, efficient heat. The GSX are available in 7 sizes ranging from 88 to 288 MBH with efficiencies of up to over 82% ...
-
Manufactured by Ambri Incorporatedbased in USA
Ambri’s product is a ready-to-install DC containerized system, complete with shelves of cells, thermal management, weatherproof outer enclosure, and a battery management system (BMS), for applications that require high energy capacity, frequent cycling, long life and high efficiency. Cells are assembled onto trays and connected within a thermal enclosure to form a MWh-scale system, which is ...
-
Manufactured by BlazeTech Corporationbased in USA
Historically, the quantity of NO and NO2 (NOx) in the products of combustion was not sufficient to affect performance, and their presence was largely ignored. The growing concern with smog and acid rain producing mechanisms (in both of which NOx plays a vital role) have turned the focus around, and low-NOx burner and furnace designs have undergone intense development for the last two decades. ...
-
Manufactured by Smith Cast Iron Boilersbased in USA
The Smith GBX gas-fired residential boiler is designed to provide dependable, efficient heat. Appreciated for its simplicity and relatively rare need for routine service, the GBX is available in 5 sizes ranging from 70 to 195 MBH with efficiencies of up to 82% ...
-
Manufactured by Muntersbased in USA
VariMax IFRG combines Des Champs Products heat-exchanger design with indirect heating technologies to deliver contaminant-free process air with very high efficiency. Recirculation of the combustion gases allows the heater to attain an efficiency of 90%, 1,000°F (555°C) temperature rise, 1,200°F (649°C) discharge temperature, and a 40:1 ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300 Waste Gas Burner is designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU fluctuations. A ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, the Shand & Jurs Biogas 97300T Waste Gas Burner and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The 97300T efficiently incinerates waste gases thus minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such as the EPA. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you