Gas Combustion Equipment For Energy Management
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
-
Manufactured by Framesbased in NETHERLANDS
Frames Hydraulic Power Units (HPUs) provide reliable and clean hydraulic energy to a variety of users in offshore and onshore locations. Our HPUs ensure reliable operation and control of a wide variety of equipment, including subsea controls, IWOCS, topside actuated valves, turret actuated valves, cargo handling systems, turret disconnect systems, and seal ...
-
Manufactured by ConDex Systems Inc.based in USA
The ConDex Energy Recovery System, the breakthrough technology from Combustion and Energy Systems that perfects the recovery of heat from exhaust gases. Flue gases from boilers, turbines, ovens, dryers, etc. - single or multiple sources of waste heat, the ConDex System recovers tremendous amounts of waste energy and returns it directly to your operation. In fact, the ConDex Condensing Heat ...
-
Manufactured by Ennovobased in AUSTRALIA
Our high temperature (HT) flare range provides an ideal solution to meet the increasing regulation in regards to emissions from landfill and anaerobic digester gas flares. Control of the combustion gasses is critical to a successful application of this approach to meet emission standards. Biogas Systems’ high temperature systems excel in achieving the correct mix of fuel gas and combustion ...
-
Manufactured by Clyde Bergemann Power Groupbased in GERMANY
Clyde Bergemann provides expertly engineered, custom-designed and fabricated dampers for a full range of utility and industrial applications. Bachmann® dampers are recognised worldwide for high performance, quality manufacture, heavy-duty design, innovative materials, and leading edge technology for optimised performance. Whether a damper is for the control, modulation or isolation of air-gas ...
-
Manufactured by Windsor Engineeringbased in NEW ZEALAND
Crossle Coils manufacture a wide range of Hot Water or Thermal Fluid Heat Recovery Coils. A Heat Recovery Coil is principally designed to Extract normally expelled heat from a Flue Gas Stream or a Hot Air Stream and to utilise the recovered heat for pre-heating the boiler feed water, heating water for wash down purposes or process heating. Thermal Fluid can be circulated through a Heat Recovery ...
-
Manufactured by IBS Industrie-Brenner-Systeme GmbHbased in GERMANY
Versatile applicable standard burners for industrial furnaces and thermal process plants. GBC-series with ceramic flame tube for high flame velocities, GBS-series for installation in a refractory tile or with a metallic flame ...
-
Manufactured by LPP Combustion, LLCbased in USA
Upgrading power plants with Multi-fuel capability serves as a blackout avoidance and fuel-cost management measure to keep electric rates low and power ...
-
Manufactured by Sigma Thermal, Inc.based in USA
A convection style heater offers the benefits of a direct-fired heater while eliminating some of the drawbacks associated with radiant heat transfer. Radiant heat transfer can be undesirable in certain temperature-sensitive applications as radiant heat transfer tends to be more intense and unevenly distributed around the coil surface. Sigma Thermal’s convection style direct fired heater ...
-
Manufactured by Gaumer Processbased in USA
Pressure reduction stations are required to regulate the high incoming pipeline pressure to meet the desired equipment pressure. Plants utilize equipment such as gas compressors, engines, turbines, burners, etc. have a demand of a specific operating pressure range set by the equipment manufacturer. Gaumer Process provides standard (in accordance with Gaumer standard specifications) and custom ...
-
Manufactured by F.lli Tatano s.n.c.based in ITALY
Kalorino, the modern design wood-burning fireplace, is the unique heating system used for all types of environments. Renewable technologies and customized solutions provide high performance and low fuel consumption. Range: from 15 to 34 kW heat ...
-
Manufactured by Dee Piping Systemsbased in INDIA
DEE provides end to end piping systems solution ranging from design, engineering, procurement, shop fabrication to supply as per ASME, DIN, Indian Boiler Regulations (IBR) / other third party inspection / approval as applicable for carbon steel, alloy steel and stainless steel pipe spools for Power, Oil & Gas, Process and Original Equipment Manufacturers (OEM) piping systems. The company ...
-
Manufactured by ClearSign Combustion Corporationbased in USA
All refineries and petrochemical plants have flares as a safety device. During plant start-up, or when an unexpected situation arises causing a buildup of pressurized hydrocarbon gases, the excess gas is vented through a pipe to a centralized location on the refinery grounds. There are many such sources of high-pressure gas in a plant, and for some plants the flares are gathered into a central ...
-
Manufactured by Wisconsin Oven Corporationbased in USA
Wisconsin Oven's custom batch ovens conquer the toughest applications. Our extensive experience and complete engineering department can fill any need for industrial batch ovens. Whether it is a “customized” standard oven or complete engineered solution, your satisfaction is our ultimate goal. Our patented industrial oven technology enables us to build any size unit, with operating ...
-
Manufactured by Spilling Energie Systeme GmbHbased in GERMANY
Gas expansion plants utilise the pressure gradient between natural gas transport networks and the distribution systems or consumers to extract mechanic and electric ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
In the cogeneration unit, a special, gas-powered combustion engine drives a generator to convert mechanical energy into electricity. This is used to supply the current demand in the building to which it is connected, any excess can be fed into the supply network. The exhaust heat is recovered from the cooling water, lubricating oil, exhaust and charge air in heat exchangers, producing hot water ...
-
Manufactured by Agra Tech, Inc.based in USA
Short heat recovery time reduces temperature fluctuations, promoting a natural growing environment. Provides air circulation to reduce dead spots in the greenhouse, reducing high moisture areas that promote mold growth. By installing multiple heaters within the greenhouse you build in redundancy. If one unit would happen to go down, you still have others to maintain freeze protection which could ...
-
Manufactured by GGS Structures Inc.based in CANADA
Wood is a renewable form of energy with great "untapped" potential. It's abundant, renewable, local, and an eco-friendly and economical alternative, or addition, to any modern gas or oil heating ...
-
Manufactured by Muntersbased in USA
The VariMax™ OTH (Once-Through Heater) is a high efficiency, industrial, indirect-fired gas heater used to heat process air streams without contaminating the air with the products of combustion. The OTH is well-suited for recirculating ovens, dryers, makeup-air applications in cold environments, and industrial processes with moderate temperature rises. The counterflow configuration, ...
-
Manufactured by Eneraque Pty Ltdbased in AUSTRALIA
Biogas flares are used to convert waste gases such as those produced from sewerage sludge treatment or from the fermentation processing of biomass (a renewable resource) in biogas plants. This technology turns these high potential energy gases into complete combustion for cleaner emissions. Eneraque’s biogas flares can be tailored to suit your specific ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you