Gas Cooling Equipment For Energy Management
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases by passing them through a gas tube heat exchanger. Cool ambient air is blown across the hot heat exchanger tubes, which provides heated clean air for factory space heating, pre-heated combustion air or process ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The Current Transformers for with your 3 Phase Power Meter to measure power consumption! Select one per phase to be ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Over recent years companies and organisations of all sizes have been diligently researching new ways of reducing costs and improving the efficiency of their industrial processes. One of the ways we can help companies to achieve these goals is to utilise the heat generated by the incineration process through Energy Recovery Systems in order to provide valuable resources that can be subsequently ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Biogas, sewage gas and land fill gas contains not only water vapour, but also a whole host of additional impurities such as hydrogen sulphide, NH3 and siloxane, which, when processed in the utilization system can not only lead to a reduction in efficiency, but also result in damage of the ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS G Series is a complete stainless steel multitube heat exchanger designed specifically for exhaust gas cooling and thermal recovery applications. Similar to the HRS K Series, the exhaust gases flow through the interior tubes and the service fluid flows through the surrounding shell. Using our corrugation technology, heat transfer and efficiency are increased over standard smooth tube ...
-
Manufactured by Stellar Energybased in USA
GE’s 7HA is a large and powerful air-cooled gas turbine with outputs in the range of 275 to 337 ...
-
Manufactured by Super Radiator Coilsbased in USA
Heat exchangers used for compressed gas are used for cooling. Our heavy wall tubes can stand working pressures of 5,200 psi. Tube sizes range from 3/8 inch to 5/8 inch. Materials include copper, aluminum, stainless steel, carbon steel, titanium and others. This product is brazed or welded depending on the material and ...
-
based in UNITED KINGDOM
Air preheaters take energy from a process stream to heat incoming air to a system. This operation increases the inlet temperature of the air to the process thus improves the overall efficiency of the system. Air preheaters may be configured as gas to air or liquid to air, depending on the available process ...
-
Manufactured by PlanET Biogas USA Inc.based in USA
The water-saturated raw gas enters the piping system where it is cooled in a dryer. A separator then eliminates the liquid faction of the biogas, after which the gas is reheated through a blower and the pressure is boosted. ...
-
Manufactured by CALORPLAST Wärmetechnik GmbHbased in GERMANY
CALORPLAST plastic immersion-type heat exchangers are suitable for heating and cooling of concentrated inorganic acids, high-purity media or aggressive and surface-encrusting fluids in tanks. They are important components in i.e the surface technology and the chemical ...
-
Manufactured by Stellar Energybased in USA
The purpose of Turbine Inlet Air Chilling is to restore the power output of a combustion turbine at elevated ambient temperatures to its rated capacity or better. TIAC is especially compelling in warm climates where a turbine’s output can decrease at the same time more power is needed for comfort cooling/air conditioning. Stellar Energy’s mechanical TIAC solution is a heat transfer ...
-
Manufactured by J.R.Furnace And Ovens Private Limitedbased in INDIA
JRFURNACE has a full range of Pit type Heat Treatment up to a capacity of 100 MT for hardening, annealing, normalizing, carburizing, nitriding, tempering, aging and stress relieving to offer to industries like Fastener, Bearing, Forge Parts, Gears, Rolls, Strip, Wire, Piston rings etc in steel industries besides cylinder heads and pistons for Aluminium industries. These furnaces are of circular ...
-
Manufactured by Hydro-Pac Inc.based in USA
The LX-SERIES™ Gas Compressor is the most popular compressor for hydrogen gas applications. This model has been installed world wide in fixed and mobile fueling stations, industrial and manufacturing sites, research and development facilities and off-shore applications. Standard models are rated for discharge pressures of 1,500 to 12,000 psig with frame sizes from 3 to 60HP. These ...
-
Manufactured by Hydro-Pac Inc.based in USA
The FLEXI-POWER™ High-Pressure Gas Compressor is used for high pressure testing, alternative refueling, high flowrate research applications and heavy duty industrial applications. Standard units are available for discharge pressures of 10,000 to 60,000 psig (70 to 415 MPa) in frame sizes from 10 to 100 hp (7.5 to 75 kW). Two-stage FX compressors typically operate with inlet pressure ranges ...
-
Manufactured by Justsen Energiteknik A/Sbased in DENMARK
Capacity up to 50 t/h. Designed for versatility as the combustion system can be adapted for all types of biomass fuels. The boiler consists of a separate grate/radiation section, a horizontal steam drum with flue gas tubes and a vertical flue gas economizer. The boiler is available in both high pressure hot water and saturated steam ...
-
Manufactured by Bücker + Essing GmbHbased in GERMANY
Refurbished AT engine, repaired according to RAL-GZ 797. Four-stroke Otto gas engine (190/210 kW). 6 cylinders in line. Turbocharging: Exhaust gas turbocharger with water-cooled turbine housing. Mixture cooler: two-stage mixture cooling with high and low temperature ...
-
Manufactured by Atlas Manufacturing Ltd.based in CANADA
Built at our facility, these well-designed units are a great fit with our Limited Access Drill Rigs. Hydraulic Equipped with an air cooled Koehler gas engine, this unit outputs 3000 psi at 25 ...
-
Manufactured by Carod SLbased in SPAIN
Motor: Deutz. Model: BF4M2011. Pump: Caprari. Pump Model: BHR-250B. Max Pression: 0,8 BAR. Max Flow: 914 m3/h. Type: low pressure. Coupling: Compr.gland. Max Height: 8 mca. RPM: 1600 RPM. Gas: Diesel. Cooled: Aceite radiador. Finish: M.Baseframe. ...
-
Manufactured by Econotherm Limitedbased in UNITED KINGDOM
Econotherm exhaust gas waste recovery units are widely used to deliver significant running cost and corresponding C02 reductions on many types of furnaces, ovens, boilers and process ...
-
Manufactured by Luehr Filter GmbHbased in GERMANY
Flat-tube heat exchangers are - if necessary - installed upstream of flat-bag filters in order to reduce the temperature of the gases to be cleaned to a temperature admissible for the filter fabric or to adjust the optimum process temperature. During development of this heat exchanger special importance was attached to the objective to achieve a reliable continuous operation, combined with a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you