Only show results in Virginia? Ok

Gas Infrastructure equipment for Energy Management

  • Premium

    MCZ - Inspection Station and Test Bench for Fuel Cells

    Automatic test bench to check fuel cells with automatic recording of characteristic U/I line, characteristic gas stoichiometry line, dynamic load behavior, characteristic line with different cell temperatures, gas dampening states, and operating pressures.

    By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Specialized Systems Product line

  • Premium

    Rotork - Model HPG Range - Pipeline Actuators

    The HPG range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust scotch yoke mechanism field proven the world over in all types of fluid power applications. Manual override is a standard feature of the range. Our design incorporates a separate cylinder for hydraulic override to ensure ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Fluid Power Actuators Product line

  • Premium

    Rotork - Model GO Range - Gas Over Oil Pipeline Actuators

    The GO range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust GH and RH quarter-turn prime movers and are field proven in installations around the world. Control configurations are available to meet virtually any operational requirements.

    By Rotork plc based in Bath, UNITED KINGDOM. from Fluid Power Actuators Product line

  • Premium

    Rotork - Model ELB - Line Break Detection System

    Rotork’s ELB (Electronic Line Break) is a robust self-contained electronic pipeline monitoring system designed for use in the gas & oil industry. It will continuously monitor pipeline pressure dynamics to provide early detection of pipeline breaks and initiate automatic valve actuator movement to an emergency position based upon ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Fluid Power Actuators Product line

  • Premium

    Impact - High Integrity Modular Pneumatic Actuator

    The Midland-ACS IMPACT is a high integrity modular pneumatic actuator control assembly in 316L stainless steel, used for the control and sequencing of process valve actuators on oil and gas platforms/pipelines. Whether it be a standard shut off circuit or an intricate control system, IMPACT can be tailored to meet the requirements of your project.

    By Rotork plc based in Bath, UNITED KINGDOM. from Pneumatic Valves and Manifolds Product line

  • Premium

    Shand & Jurs Biogas - Model 97200 - Flame Check

    The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm regulators.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Burners and Flares Product line

  • Premium

    GE Jenbacher - Model Type-3 - Gas Engine

    Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its technical maturity and ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Engine - Gas Engine Product line

  • Premium

    AMETEK PI - Model Chanscope II - Dew Point Tester

    The Need: Natural gas pipeline operations are dramatically impacted by the presence or formation of liquids within the gas pipeline. The dew point of the natural gas must be periodically checked in order to ensure that troublesome liquid formation is not occuring in the pipeline.

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Manual and On-Line Chilled-Mirror Dew Point Analyzers Product line

  • Pressure Vessels

    Rhino Process Equipment, which is an Ergil Group International company, manufactures is specialized in engineering and manufacturing in high and low pressure vessels, closures, pig launcher and pig receiver systems, separators, columns, silencers, and heat exchangers. We have a vast experience in pipeline pigging systems and familiar with ...

    By ERGIL GROUP based in Jumeirah Lake Towers, UNITED ARAB EMIRATES.

  • Sterlitech Stainless Steel Gas Line Holders

    Female threaded locking ring enables filter changes without removing the holder from connecting gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow from either inlet or outlet. Applications: ultraclean and sterilize air and other gases including compressed gases, in-line ...

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Pressure and Vacuum Filtration Product line

  • Ocala - Model ExcaVision - Grade Control System

    ExcaVision is a grade control system for excavators and backhoes. It consists of a touch screen graphics display, three angle sensors, and a receiver box. The standard system is wireless, cabled versions are also available for underwater work. The advantages of using ExcaVision The ExcaVision grade control for excavators is used in rough ...

    By Ocala Instruments based in Orlando, FLORIDA (USA).

  • Model HCNG Series - High-Pressure Compressed Natural Gas Dryer

    Pressure through 5000PSIG/345 BarG. HCNG systems are ideal for large gas flow continuous duty service after the natural gas compressor. Systems are completely self-contained with pre-wired and pre-piped components. One tower purifies while the other regenerates.

    By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from Compressed Natural Gas Product line

  • Gas Distribution

    Polyethylene gas pipes are the preferred natural gas distribution piping product of choice, with over 90 % usage in Europe today. Polyethylene gas pipes ar lightweight, non-corrosive, available in coil lengths, and easy to install by heat fusion or mechanical fittings. For these reasons, they have been proven and used since the 1960's. Eupen Pipe ...

    By Kabelwerk Eupen AG based in Eupen, BELGIUM. from PRESSURE Product line

  • Supertech - Model Code 103 - Fitting Tee Connection/Raw Steel

    For low and medium pressure gas pipeline. With monobloc transition fitting UNI 9736 PE 100 SDR 11.

    By Recanati Europe Srl based in Udine (UD), ITALY. from Gas Product line

  • Light Portable Tanks

    Polyehtylene Light Transportable Tank, approved ADR versions available, to transport gas oil in safety!

    By Numak Srl based in Castello D`Argile, ITALY. from Tanks Product line

  • Processall - Mixmill Mixers

    The Processall Mixmill line of mixers are the most versatile units in any industry. These mixers utilize the Mechanically Fluidized Bed Mixing Principle to accomplish in minutes what conventional processors take hours to do. With this design, you can mix, react, and dry all in the same vessel. The Mechanically Fluidized Bed Mixing Principle ...

    By Processall based in Mason, OHIO (USA). from Mixing Equipment Product line

  • Wright Austin - T Gas Liquid Separators

    T air liquid separators are code constructed of cast iron, carbon steel and 316SS and designed for a range of industrial applications including steam pipelines and compressed air pipelines. Castings are available with threaded connections as small as 3/4' to 3' in size and with ANSI flanged connections from 1' to 5' in size.

    By Technical Products and Services based in Blairstown, NEW JERSEY (USA). from Air / Liquid Separators Product line

  • CMO - Model BU Series - Gas Valve

    Flanged light butterfly, inside refractory lined.

  • HSB - Model Type BB1 - Horizontal Axially Split Single Stage Between Bearing Pump

    The HSB ISO 13709 / API 610 Type BB1 is an axially split, single stage, horizontal, between bearing pump. Many HSB pumps are in service on crude oil pipelines in many parts of the world. Its robust casing and custom hydraulics are specifically designed to meet project requirements.

    By Sulzer Management Ltd based in Winterthur, SWITZERLAND. from Pumps and Systems - Axially Split Pumps Product line

  • PE 100 Natural Gas Pipes

    Produced from high density polyethylene pipes PE100 pressure pipe applications used today, which is one of a pipe that is used for underground natural gas lines. Natural gas for homes and businesses since 1960 in tasimakta PE100 high pressure and shock-resistant and chemical-resistant because it can be used safely. Due to having long lasting and ...

    By Kuzeyboru based in Aksaray, TURKEY. from Gas Pipes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you