Gas Infrastructure Equipment For Energy Management
-
Manufactured by LEANCAT s.r.o.based in CZECH REPUBLIC
Research and development of solid oxide fuel cells poses specific requirements to the testing equipment, as it must operate at high temperatures. Leancat STS-10 satisfies all requirements of SOFC testing with the ability to preheat inlet gases and extensive scripting ...
-
Manufactured by Shandong Chaiwei Power Equipment Co.,Ltdbased in CHINA
Semi-coke is made from smokeless coal in low temperature and dry distillation kiln, its technology is similar to coal gas gasifier, just the output product is different with different heating temperature. In the producing process of Semi-coke ,a great amount of exhaust gas is produced, its main contents is CO, about 600-700M3 semi-coke gas is produced from 1T semi-coke in low temperature and dry ...
-
Manufactured by Centrotherm Clean Solutions GmbH & Co. KGbased in GERMANY
The centrotherm CT-D Ventline cartridges are used in gas cabinets. The CT-D-VLC absorbs residual gases during a gas bottle exchange when the lines are purged. The cartridges are made of stainless steel and are German TÜV-inspected and approved pressurised vessels. Thus, the cartridges can be mounted directly into the gas cabinet upstream from the pressure reducer. Even if the complete gas ...
-
Manufactured by Hebei Huayang Steel Pipe Co., Ltd.based in CHINA
Out diameter: 114mm - 812.8mm (4"-32"). Thickness: 4-22mm. Length: 3-20m. Type: ERW (Electric Resistance Welded), HFI (High Frequency Induction), HFW (High-Frequency Welding). Standard: API SPEC 5L ISO 3183, GB/T 9711.1, GB/T 9711.2, GB/T 9711.3. Uses: For conveying gas, water and oil, in the oil or natural gas industries. Chemical Analysis ...
-
Manufactured by Infrasolid GmbHbased in GERMANY
Black-body infrared sources in TO39/TO5 package. HISbasic series emitters have an integrated gold plated reflector that directs the radiation emitted from the rear to the front in order to achieve maximum efficiency. All our emitters offer minimum drift at a constant electrical resistance. Infrasolids IR emitters are characterized by a very low temperature coefficient of electrical resistance. ...
-
Manufactured by Bruest Catalytic Heatersbased in USA
While natural gas is normally transmitted in pipelines at pressures up to 1400 PSIG, Compressed Natural Gas (CNG) is normally stored in pressure vessels up to 3600 PSIG. For CNG to be usable, it must be decompressed or ‘let down’ to a more manageable pressure. This is a crucial part of the CNG PRS (Pressure Reduction System) process. Due to the Joules Thompson Effect, where gas ...
-
Manufactured by The Metals Factorybased in INDIA
Meiline offers one of the largest selections of compression tube fittings in the industry. Metline is a specialized manufacturer of ferrule bulkhead female connector (1 /8" to 2") in various material choices including stainless steel 304/304L stainless steel 316L Brass, Monel Alloy 400, Titanium. Hastelloy Alloy C276. Alloy 20, 904L and Inconel 600 alloys. Stainless steel 316L bulkhead female ...
-
Manufactured by PECO Industrial Silencers Ltdbased in UNITED KINGDOM
When a large diesel or gas powered two/four stroke engine or turbine is used, large quantities of air are drawn into the equipment for combustion purposes. These air induction systems may be naturally aspirated or use turbo chargers or compressors to increase the air pressure fed into the fuel mixing chambers or cylinders to increase efficiency or ...
-
Manufactured by Van Gas Technologiesbased in USA
GasDry Max is the highest performing absorbent deliquescent desiccant available on the market, for natural gas dehydration. GasDry Max can meet pipeline moisture specifications and is ideal for the most demanding natural gas dehydration applications, where natural gas producers and transporters need to prevent gas line freeze-ups, hydrate formation and condensation while operating under very cold ...
-
Manufactured by Stirling Cryogenics B.V.based in NETHERLANDS
Stirling Cryogenics has designed an integrated gas purification & liquefaction plant together with sister company Hysytech Srl from Turin, Italy for micro scale LNG production. The plants are of a modular design and can be supplied in the range of 1 – 30 ton/day with each Stirling module producing approximately 1 ton/day. There are several different designs for different feed gas ...
-
Manufactured by Remeha B.V.based in NETHERLANDS
Remeha offers several types of air source heat pumps. For detailed information on availability in your market, please refer to your country’s specific site. A heat pump captures heat from the air or ground and uses this energy to provide heating and/or hot water within a building. Air source heat pumps require little space. Air at an ambient temperature is passed over a finned heat ...
-
Manufactured by Aluprobased in UKRAINE
The aluminum round pipe has three main dimensions: outer diameter D, inner diameter d and wall thickness S. Round aluminum pipe is the most sought-after aluminum profile, as evidenced by a huge selection. Alupro offers more than 150 sizes of aluminum pipes and their number is constantly increasing. The main characteristics of an aluminum pipe include: the possibility of deformation without any ...
-
Manufactured by GECIL Processbased in FRANCE
The new closed cup flash point, designed by our team of engineers, integrates more than 20 years of experience with previous models. These units faithfully perform ASTM test procedures automatically with repeatable accuracy, but also include other international methods. The new generation expands its field of application by using a thermocouple flash detector not affected by the water vapors ...
-
Manufactured by Combustion Technologiesbased in USA
Combustion Engines, mobile and stationary, require extensive maintenance to change lubricating oil on a routine basis. Engines provide the most extreme conditions for lubricating oil, water, particulate contamination, extreme heat, and the introduction of air. As a result, the oil oxidizes much quicker than in fluid power systems and requires frequent oil replacement. Maintaining heavy mobile ...
-
Manufactured by Hunan Great Steel Pipe Co., Ltd.based in CHINA
According to the different applications, as for cold draw seamless steel pipe ,hot rolled seamless steel pipe or the hot expansion steel pipe seamless carbon steel tubes can be divided into low pressure pipe medium pressure pipe, high pressure boiler pipe, alloy steel pipe, petroleum cracking pipe, and for construction, for ...
-
Manufactured by Avatec Power Pte Ltdbased in SINGAPORE
NP 2031 Industrial UPS systems are either single or three phase output. The system can be fully customized according to the customer’s requirement. Using the most advanced technology; these systems are on-line double conversion type and specifically designed to protect the AC load from any power disruptions from the AC mains power supply. It is suitable to be used in harsh operating ...
-
Manufactured by Kahn & Company, Inc.based in USA
Kahn offers numerous systems for specific gas purification applications. Some examples are: ...
-
Manufactured by Wright Tech Systems Inc.based in CANADA
Biomass is a renewable energy resource and is often defined as "the biodegradable fraction of products, waste and residues from agriculture (including vegetal and animal substances), forestry and related industries, as well as the biodegradable fraction of industrial and municipal waste" (source EU Directive 2001/77/EC, Article 2). Biomass differs from MSW (Municipal Solid Waste) or RDF (Refuse ...
-
Manufactured by Bullfrog Power Inc.based in CANADA
The natural gas we use in our homes and businesses for heating and cooking has a significant impact on our environment. Natural gas is a fossil fuel, like oil, and not a renewable form of energy. When we burn natural gas to power our appliances or for heating purposes, carbon that was once stored underground is released into the atmosphere as carbon dioxide. Ultimately, relying on natural gas ...
-
Manufactured by EKIN METAL A.Sbased in TURKEY
Flat hot plates are flat steel products obtained by milling the substance or rectangular slab produced from scrap at approximately 800 degrees. Steel Roll : Products with thicknesses ranging between 1.20-25.00 mm in general. Sheet Metal : Products with thicknesses ranging between 6.00 - 200.00 mm and widths between 1000-3600 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you