Ground Flares Equipment For Energy Management
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular opto-electronic package for easy removal from ...
-
Manufactured by Smitsvonk Holland B.V. - a member of the Durag Groupbased in NETHERLANDS
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation.To safeguard operation, Smitsvonk's pilots provide reliable ignition and stable burning even under the most difficult climate ...
-
Manufactured by Automatic Flare Systems Limited (AFS)based in UNITED KINGDOM
The High Temperature LO-CAL range of flares offers an optimum solution for safe and efficient degassing of old landfill sites or sites with low quality gas. The innovative Lo-Cal high temperature flare is designed to provide greater gas control during the latter phases of a site. Low calorific gas high temperature combustion is necessary on more and more sites due to increased aftercare ...
-
Manufactured by Europem N.Vbased in BELGIUM
Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and partial load is ...
-
Manufactured by Parnel Biogas, Inc.based in USA
The enclosed ground flare is used in applications that required a non-visible flame, where space is limited, populated areas, and increase in destruction efficiency is required. This can be accomplished by utilizing temperature control on the enclosed ground ...
-
Manufactured by MRW Technologies, Inc.based in USA
Staged ground flares are utilized for smokeless combustion of large volumes of waste gas flow with high turndown. They are commonly used in LNG and gas processing facilities. Due to the nature of these applications, staged ground flares are designed to handle streams over a wide pressure range and variety of ...
-
Manufactured by Smitsvonk Holland B.V. - a member of the Durag Groupbased in NETHERLANDS
Ignition of main burners at places where a fixed pilot burner or igniter is not available and a spark is insufficient to ignite the main ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
AFG Combustion’s flare pilots are suitable for use on all types of Elevated Flare Tips, Ground flares and Burn Pits, in the worst weather conditions which may exist off-shore or on-shore, from sub-zero ambient conditions of Antarctica to the sand/wind storms of Middle East and Africa. The pilots have very wide application ranging from standard LPG or natural gas to low BTU gases like bio ...
-
Manufactured by Flare Products Limitedbased in UNITED KINGDOM
The high temperature burner is used for achieving a higher level of flame control and temperature. The flame is much shorter on this type of burner sitting just above the air ports. With this type of burner a temperature of 950 -1000°C can be expected without automatic air control. High temperature burners are generally becoming more widespread and are made of 304 stainless ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
Enclosed ground flares are used to destroy waste gases without radiation effects or visible flames, and with limited noise, minimized footprint and visual impact. Fives offers a range of ITAS enclosed ground flares whose burners and stack are designed to accommodate the thermal requirements of enclosed flames. ITAS pioneering technology includes several options to allow for smokeless operations ...
-
Manufactured by Europem N.Vbased in BELGIUM
Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary combustion air is supplied to the flame. The amount of air and hence the size of the tip and riser depend on the degree of smokeless ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare via piping (flare header) and burned as they exit the flare ...
-
Manufactured by Dinex A/Sbased in DENMARK
Dinex designs and manufactures high quality clamps for connecting exhaust components. Our long-term experience enables us to provide custom designs tailored to suit your clamping requirements. We can offer high strength, low weight clamps for demanding applications such as those at elevated temperatures requiring gas-tight joints. Furthermore, we can give technical support in the form of product ...
-
Manufactured by John Zink Hamworthy Combustionbased in USA
The LRGO multi-point ground flare (MPGF) has become the design of choice for operators who desire a flare system that can provide high smokeless capacities and combustion efficiency in a flare design that minimizes visual impact to the surrounding community. The LRGO flare is designed with staging and ignition systems to ensure safe, short, smokeless flames are maintained over the full operating ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
The Demountable flare system provides flexible flaring operations to so that you can place multiple risers on a single support structure. They also allow you to perform maintenance to the tip at grade with minimal use of personnel at elevation. The demountable flare system features a derrick with the riser or risers mounted in such a way to permit lowering the flare tip to grade for service ...
-
Manufactured by BMF HAASE Energietechnik GmbHbased in GERMANY
For use as an automatically operating torch for landfill and other gases, taking into account the regulations of TA-Luft (Air Quality Control) and the BImSchG (German Emissions Standards) and for use as an automatic emergency flare for bio-, sewage and other gases. With flare systems from BMF HAASE, you are on the safe side with the reliable and environmentally friendly disposal of combustible ...
-
Manufactured by TRIC Tools, Inc.based in USA
The 1″ Copper Nut is used when attaching a new 1″ copper line to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-1WED). The Copper Flaring Tool (TT-WDGE-CFT) is used to flare the new copper pipe before it is attached to the head using the 1″ Copper Nut. Be sure to put the nut on the new pipe before flaring it! The Manufacturer’s user guide is ...
-
based in THAILAND
SIES Enclosed FLare are versatile in design and suitable for total destruction of waste gas/vapors. These Systems are designed to meet local environmental norms and can also be customized as per CDM regulations. Our Enclosed Flare/Thermal oxidizers system incorporates the latest technology and features for your flaring needs to ensure optimal performance and quiet operation. SIES offers ...
-
Manufactured by Conveco Srlbased in ITALY
Enclosed flares HE and HTE type burn biogas in a cylindric enclosure fitted with a high-resistance fiberceramic insulation lining which ensures high combustion efficiency and limitation of both rumbling and radiation. Design of the burner and of the combustion chamber as well as the selection of construction material and ancillary equipment make these flares suitable for installation in projects ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you