Ground Source Heat Pumps Equipment For Energy Management
-
Manufactured by Free Energy Innovation ASbased in NORWAY
The ground source heat pump collects heat from a collector tube in the ground. The tubes should be in frost free depth, in other words, 1.0 - 1.5 meters deep. The distance between the tubes should be at least 1.0 meter to be sure that they won’t affect each other. The length of the tubes must be adapted to the building’s power and energy requirements for heat and hot water. A ...
-
Manufactured by Eclectic Energy Limitedbased in UNITED KINGDOM
The StealthGen Wind Generator is a new direct-drive wind generator, designed for a variety of microgeneration applications. It is exceptionally quiet and vibration-free in operation, qualities that are of paramount importance for any wind generator operating in close proximity to people. The StealthGen features a powerful 3-phase alternator, and computer-designed rotor blades optimised for low ...
-
Manufactured by Geothermal Supply Company Inc. (GSC)based in USA
A GSC Energy Pro loop is a prefabricated coil manufactured exclusively from WL Plastics PE4710 pipe, coiled in parallel and fused to a 180° fitting. The loop allows quick field installation of ground source heat pump vertical loop field designs. Geothermal Supply Company manufactures uncoils in standard and custom lengths to meet the requirements of your unique project installation. Loops are ...
-
Manufactured by Oilon Oybased in FINLAND
Oilon MH ground source heat pump is energy-efficient, easy-to-use and reliable. It has a clear and stylish design. In addition to the insulation of the pump body, the compressor has also been insulated by a separate casing to guarantee silent running. The pump is suitable for both new buildings and renovated sites. The Oilon Geopro MH ground source heat pump is designed to last and produce ...
-
Manufactured by Noble Green Energybased in UNITED KINGDOM
Ground source heat pumps are a viable alternative to traditional oil and electric heating solutions. They harness the natural heat that is stored in the ground - at around two metres below the surface, the temperature remains at constant at around 10 ºC throughout the year. They work most efficiently by heating properties at slightly lower temperatures than conventional heating but over ...
-
Manufactured by Regess Sp. z o.o.based in POLAND
Reduction of the costs by up to 75%, independence of fuel type, environmental-friendly system – these are the most important advantages of heat pumps. Of numerous advantages that are characteristic of heat pumps, the following are worth mentioning: lack of additional elements that have to be used in the models with traditional boilers, small overall dimensions that usually do not exceed one ...
-
Manufactured by Oilon Oybased in FINLAND
Up to half the annual energy consumed for heating domestic hot water can be generated with solar heat in Finland. Solar heat collectors can be connected to any central water-heating system and also utilised for the production of domestic hot water in a building with direct electric heating. Environmentally friendly energy can be produced from the sun for heating and producing domestic hot water ...
-
Manufactured by Ecoforest, S.A.based in SPAIN
Ecoforest high power range of ground source heat pumps allows to reduce up to 80% of the energy consumption of the installation, using a renewable source of energy that minimizes the CO2 emissions to the environment. Our R&D department, after several years of development, was able to develop algorithms that allows this heat pumps to simultaneous produce heating and cooling making them able to ...
-
Manufactured by Finn Geotherm UK Limitedbased in UNITED KINGDOM
Using the same high efficiency heat exchanger and compressor systems as the revolutionary Vmi family, the Esi and Emi systems boast industry beating COPs of up to 4.56. As all Lämpöässä systems are monovalent, this efficiency level is possible for your entire heating and hot water needs. The Lämpöässä Esi and Emi models are designed to provide a compact ...
-
Manufactured by WDS Green Energy Ltdbased in UNITED KINGDOM
Ground source heat pumps provide hot water and heating for a range of properties including homes and businesses in what is one of the cleanest and most efficient ways to produce thermal energy. A ground source heat pump uses the constant latent geothermal heat in ground water to produce thermal energy ideal for heating and hot water. Ground source heat pumps use electricity and so for every 1kW ...
-
Manufactured by Kaukora Europebased in FINLAND
Jäspi Ovali Hybrid is especially suitable for heat pumps, but it can also be connected to a wood boiler, solar collectors or electric heating. The familiar Jäspi Ovali energy accumulator has been redesigned to better meet today’s requirements: the new Ovali Hybrid accumulator has an intermediate bulkhead, a solar coil and two hot water coils as standard, as well as ...
-
Manufactured by ICAX Ltdbased in UNITED KINGDOM
ICAX Limited designed the Concrete Solar Collector as part of the ICAX Solar Road System for use in Interseasonal Heat Transfer. A Concrete Solar Collector is an efficient means of collecting a large amount of warmth to raise the temperature of a ThermalBank from the natural temperature of the ground up to over 25°C: solar recharge of the ground. Black roads tend to absorb the heat of the sun ...
-
Manufactured by Finn Geotherm UK Limitedbased in UNITED KINGDOM
The Vmi system is the latest incarnation of Lämpöässä’s market leading ground source heat pump system. Incorporating a 480 litre thermal store, and with outputs from 9kW to 17kW, the Lämpöässä Vmi is ideal as a means of providing all of the hot water and heating for your home or office. The Lämpöässä Vmi is an ideal solution for ...
-
Manufactured by Brighter Green Renewables Ltdbased in UNITED KINGDOM
Ground Source Heat Pumps are designed to provide up to 100% of a property’s central heating and hot water demands by using electricity to convert the heat energy stored in the ground to heat ...
-
Manufactured by ICAX Ltdbased in UNITED KINGDOM
Ground source heat pumps work by absorbing heat from the ground and transferring the heat into buildings – to heat the buildings without burning fossil fuels. The heat pump itself is located in the building and works on the same principles as a domestic fridge: the heat pump in a fridge transfers heat out of the fridge and uses a heat exchanger to disperse the heat from a small radiator at ...
-
Manufactured by Heliotherm Wärmepumpentechnik Ges.m.b.H.based in AUSTRIA
Your own home is the perfect place to replenish geothermal energy. The installation of a Heliotherm ground source heat pump with surface collectors, adds to your garden creating an inviting place of rest and inexhaustible source of ...
-
Manufactured by ICAX Ltdbased in UNITED KINGDOM
A Groundwater Heat Pump system works by recovering heat stored naturally in groundwater or aquifers. The water passes through heat pumps to yield its low grade heat before being returned to the aquifer at a lower ...
-
Manufactured by CambridgeHOKbased in UNITED KINGDOM
Produce the heat you need and save thousands – invest in a commercial heat pumps installation and make the switch to renewable ...
-
Manufactured by Energy Gain UKbased in UNITED KINGDOM
Energy Gain UK can: Design, Supply & Install the following Renewable Technologies. ...
-
based in USA
BTES is an improvement on conventional closed-loop ground source heat pump (GSHP) geothermal systems. The ground heat exchanger (GHX) array for a BTES system is designed and operated in a manner such heat is stored or abstracted seasonally, whereas conventional GSHP systems are designed to simply dissipate heat or cold into the subsurface. BTES essentially uses the Earth as a thermal battery, as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you