Only show results in Virginia? Ok

Heat and Power equipment for Energy Management

  • Premium

    Anguil - Industrial Energy & Heat Recovery Solutions

    Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Process Combustion - Direct-Fired Process Heaters

    In these applications the process stream can be directly heated without the need for a heat exchanger. This is achieved by mounting the burner directly in the air stream where it takes up the oxygen in the process stream. Alternatively, you can fire a burner in the process stream and introduce additional combustion air through the back of the ...

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM. from Process Heaters Product line

  • Premium

    ACME - Model GS Series - Gas Fired Steam Superheaters

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

  • Premium

    Process Combustion - Indirect-Fired Process Heaters

    Many applications require the heating medium to be kept separate. Our indirect-fired units are cabin-style convective heaters where the heating medium is passed through a heat exchanger.

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM. from Process Heaters Product line

  • Premium

    Process Combustion - Vaporiser Systems

    Process-Combustion’s Vaporisers convert cryogenic or fully refrigerated gases to their gaseous state. Our equipment processes LNG, liquid nitrogen or oxygen and fully refrigerated petroleum gases such as propane, ethylene and butane. Over many years Process Combustion has worked in partnership with Selas Linde, part of The Linde Group, one ...

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM. from Vaporisers Product line

  • Premium

    CTP - Multi Fuel Burners

    Multi Fuel Burner: Multi fuel burners can be employed in a wide range of applications for gaseous and fluid combustibles, or liquid waste with a high combustion heat level.

  • Premium

    Norsonic - Model Nor1216 - Outdoor Microphone for Permanent Installations

    The Nor1216 is a measurement microphone for all-weather conditions designed for use with the Nor140/Nor150. It features SysCheck verification and a heated preamplifier. It is intended for permanent outdoor applications.

    By Norsonic AS based in Lierskogen, NORWAY. from Outdoor Microphones Product line

  • Premium

    Electricity from Gas-Powered Generators

    Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for hea

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Power Product line

  • Premium

    GE - Model APG - Associated Petroleum Gas / Flare Gas

    Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Other Product line

  • Premium

    Cogeneration / Combined Heat & Power Systems (CHP)

    Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Power Product line

  • Premium

    Remote Combined Heat and Power Generation

    In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs.  Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Power Product line

  • Premium

    GE Jenbacher - Model Type-6 - Gas Engine

    Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Engine - Gas Engine Product line

  • Premium

    Residential Cogeneration / Combined Heat and Power (CHP)

    Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Natural Gas Product line

  • Premium

    Steel Production Gas & Cogeneration / Combined Heat & Power

    High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Special Gases Product line

  • Premium

    Model STR-21G-S0 - Solar Monitoring Systems

    EKO’s new solar Monitoring System, the STR-21G-S0, is a turnkey sensor system to perform the most accurate solar radiation measurements of the direct solar radiation component. It can be easily integrated to any DAQ system, which has multiple analog or digital inputs. With the standard sun-position sensor and GPS receiver built inside the ...

    By EKO Instruments based in San Jose, CALIFORNIA (USA). from Solar Energy - Solar Monitoring Stations Product line

  • Premium

    Siemens - Model BGA - Biogas Analyzer

    Gas analysis in biogas plants with the 'Set BGA' complete measuring system from Siemens. Set BGA (Bio Gas Analyzer) is a fully configured and ready-to-run gas analysis system for use in biogas plants. The integrated ULTRAMAT 23 industrial gas analyzer has four measuring channels for simultaneous determination of the relevant gas components ...

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA). from Continuous Gas Analytics Product line

  • Premium

    Commercial Cogeneration / Combined Heat and Power (CHP)

    Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for commercial applications. Cogeneration systems are successfully applied in a range of different applications including office buildings, airports and retail centres.

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Natural Gas Product line

  • Premium

    Absorption Chillers

    Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide.

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Waste Heat Recovery for Ancillary Equipment Product line

  • Premium

    GE Jenbacher - Model 920 - Gas Engine

    As the only gas engine specialist offering small and large engines, GE  is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power and grid stabilisation with a ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Engine - Gas Engine Product line

  • Premium

    GE - Cogeneration Module Configuration

    A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the 

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Engine - Jenbacher Gas Engine Configurations Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you