Heat And Power Equipment For Energy Management
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term “gas” refers to the ambient air that is taken into the engine and used as the working medium in the energy conversion ...
-
ShowcaseManufactured by EnviTec Biogas AGbased in GERMANY
Waste materials and by-products are accrued in conjunction with every single manufacturing operation, such as enterprises associated with the food and restaurant sector, the fuel industry, the cosmetics sector and the animal husbandry sector. However, the quantity of organic waste produced by the citizenry is also significant for communes – about half a tonne per year per person. In ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's modular concept for gas turbine generator sets has been optimized for transportation and the scope has been minimized for civil works with our Power Generation Module (PGM). Good for non-hazardous applications only, our PGM solution results in shorter installation and commissioning times, and reduces overall costs for our ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The conventional fired boiler generates thermal heat or process heat while simultaneously utilising the heat potential from waste heat sources. Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization. Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources. High supply reliability thanks to ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- Ideal for combination with combined heat and power units or gas turbines - Environmentally friendly generation of steam and hot water from available waste heat - High efficiency through efficient tubular heat exchanger and thermal insulation - Cost-efficient to purchase and operate as no burner is ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
If you need electricity and thermal energy simultaneously, a cogeneration system may be your solution, and can offer a favorable return on investment. Cogeneration allows you to benefit from two or three forms of energy for the price of one, with minimal environmental impact. These systems can turn clean-burning natural gas into cost-effective, reliable electricity, use steam for production ...
-
PremiumManufactured by EnviTec Biogas AGbased in GERMANY
Biomethane upgrading opens up a promising future market for the biogas industry. With feed-in into the public natural gas grid, the green all-rounder is perfect for the decentralised supply of energy, offering a long-term replacement for fossil natural gas and driving the energy transition forward. What’s more, the biomethane manufactured in the gas upgrading plant has the exact same ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization - Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources - High supply reliability thanks to self-firing function - Robust, reliable and durable - Versatile design for use with different fuel types and as a multi-fuel firing unit ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- Environmentally friendly generation of steam from available waste heat - The perfect addition to energy concepts involving combined heat and power generation - High efficiency through efficient tubular heat exchanger and thermal insulation - Additional efficiency gain thanks to optional integrated economiser - Matched, modular system for easy planning and fast ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
Manufactured by LPP Combustion, LLCbased in USA
The NGL 3000 Power System operates on C1-C8 fuels to provide 3400 kW of electric power with natural gas emission levels. The NGL 3000 can optionally be configured as a Combined Heat & Power (CHP) system to also produce hot water or steam. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for heat, the alternative combined heat and power configuration may be a more useful engine ...
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
NG/C steam generators belong to the two smoke passes with dry back type. Studied to have a minimum efficiency of 90%. It’s delivered complete with all regulation and safety devices. lt can use every kind of burner on market, to grant immediate after sales service in every town. Steam production from 300 up to 6.000 Kg/h. Pressure up to 18 bar. Completely automatic working, they include all ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
This Burkhardt adaptation of the popular MAN D26 pilot injection gas engine of the CHP ECO 180 HG operates without pilot oil. Thus, it is operated on wood gas alone and is even easier to service. The pilot oil unit was removed. Instead, the wood gas-air mixture is ignited with spark plugs. The Burkhardt ECO 165 HG, together with the Burkhardt V 3.90 wood gasifier, generates about 165 kW ...
-
based in USA
There are many configurations of anaerobic digesters and can run at different target temperatures the most common of which are Mesophillic (95 F, 35 C) or Thermophilic (125 F, 50C). There are different populations of anaerobic microbes that thrive in these temperature zones. Digesters can combine all the main process chemistry steps (hydrolysis, acidification, acetogenisis, methanogenis) either ...
-
Manufactured by HeatMatrix Group B.V.based in NETHERLANDS
Cold spot corrosion problems and mechanical failures limit heat recovery. Polymer economisers are corrosion resistant and designed for leak proof thermal ...
-
Manufactured by Scherzinger Pumps GmbH & Co.KGbased in GERMANY
Automobile engines can be converted for use as CHP engines and stationary operation. It is crucial here that the aggregate is permenantly supplied with fresh oil. SCHERZINGER offers you a solution for this: Our oil pumps ensure the necessary pressurization prior to the initial use; they can be used for oil changes, and they assume the bypass flow filteration in your ...
-
based in FINLAND
We can use waste wood with higher moisture content up to 40% (Our plants do not need a dryers before gasification), Waste wood can be low-quality waste wood = lower fuel cost to produce electricity, Our gas cleaning system is water based cleaning system = cleaner gas and lower OPEX costs when engine gets clean gas, Our pricing is competitive with around three year payback time, Delivery will be ...
-
Manufactured by HENAN SUNTRONT TECH CO. LTDbased in CHINA
Common Heat Energy Meter can measure heat power passed through pipes. It consists of flow sensor, microprocessor and temperature sensor. Microprocessor obtains flow signals through flow sensor and signals of water temperature at the entrance or exit by temperature measuring circuit, and then it will calculate the released heat power by heat-carrying liquid according to the standard of heat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you