Heat Engine Power Equipment For Energy Management In USA
-
Manufactured by Qnergybased in USA
The Glycol HQat TracQ (GHT) feature allows for th9 waste heat from the Stirling engine and it's exhaust to be used by the customer. A plate heat exchanger is used to separate the engine coolant and the GHT media. The GHT media is circulated using a rotary vane pump on a variable speed motor. The PowerGen monitors the supply and return temperatures of the GHT media and adjusts the units operation ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Generate electricity and heat via a combined heat and power gas engine. Biogas is formed by the anaerobic decomposition of putrescible organic material. Biogas can either be used to generate electricity and heat via a combined heat and power gas engine, or can be cleaned to produce pure biomethane via biogas upgrading. Clarke Energy is a distributor of Jenbacher gas engines which are designed for ...
-
Manufactured by Echogen Power Systemsbased in USA
The EPS heat engine uses industrial grade liquid CO2 as the working fluid, which does not have practical temperature or pressure working ...
-
based in USA
The first true off-grid electrical system of its kind, our biomass fueled, BioGen combined heat and power system creates up to 1 kW of electricity by harnessing the power of gasified biomass. The robust design our biomass system utilizes the full potential of biomass by creating 8.5 kW (29,000 BTU’s) of thermal energy for domestic water & space heating in addition to electricity. Keep ...
-
Manufactured by Powerphasebased in USA
Turbophase lets gas turbines operate at optimum power and fuel efficiency, no matter the environmental ...
-
Manufactured by MRU Messgerate fur Rauchgase und Umweltschutz GmbHbased in GERMANY
Stationary Analyzer for Syngas - ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems can be used to achieve overall system efficiencies of ...
-
Manufactured by Echogen Power Systemsbased in USA
Echogen’s solution turns thermal energy into electricity, using sand as the storage medium. The process involves using a carbon dioxide heat pump cycle to convert electricity into thermal energy by heating the sand-based reservoir, which is then converted back into electricity on ...
-
Manufactured by Cyclone Power Technologies, Inc.based in USA
Cyclone’s Waste Heat Engine (WHE, pronounced “we”) recaptures heat from external sources to create steam which powers the engine. The WHE models are designed to run a grid-tied or primary electric power generator while producing ZERO Emissions. All WHE operations are currently run through Cyclone’s subsidiary Cyclone-WHE LLC, which operates under the trade name “WHE ...
-
Distributed by MRU Instruments - MRU Gas Analyzerbased in USA
The SWG-100 Compact is a cost effective stationary biogas analyzer designed for discontinuous measurement. It has user programmable settings for up to 24 measurements per 24 hours. It is typically used in the harsh industrial environments of combined heat and power (CHP) engine gas monitoring. -Plug & play, pre-calibrated sensors -Safety in use with gas flow restrictor orifice at gas inlet and ...
-
Manufactured by Marathon Equipment Companybased in USA
SMARTFERM Anaerobic Digestion System is the advanced system that transforms organic waste streams into safe, environmentally-friendly biogas—a clean, carbon-neutral fuel that can power CNG vehicles or be burned in a Combined Heat and Power (CHP) unit to generate low-cost electricity.This electricity can then be used on-site to offset high energy costs or sold back to participating utilities ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...
-
Manufactured by Energy & Environment Inc.based in USA
Co-generation (also combined heat and power, CHP) is the use of a heat engine or a power station to simultaneously generate both electricity and useful heat from a single source of fuel. All power plants lose certain amount of heat and energy during electricity generation. Typically, older utility power plants have an efficiency of 28-30% and 30-42% for Combined Cycle systems. Some of the latest ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit linked to heat dump ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling circuits. This high temperature and flow makes it well suited for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you