Heat Exchanger Performance Equipment For Energy Management
-
Distributed by Wood Energy Ltd.based in UNITED KINGDOM
Lambda sensor with fuel-quality detection. Fully refractory-lined high performance combustion chamber. Fully automatic heat exchanger cleaning system. Fully automatic ash extraction system. Best ease of use through SMS module. Extended warranty. Superb Factory-Service for Hargassner customers. Option: Wood log ...
-
Manufactured by SOLARFOCUS GmbHbased in AUSTRIA
The maximus boiler is a result of distinguished innovation. A reciprocate moving step grate ensures the seamless firing of the fuel conveyed into the combustion chamber. This enables the boiler to process a wide range of fuels, such as pellets or wood chips, with outstanding efficiency and low emissions. Combustion chamber temperature monitoring and integrated flue gas recirculation ensure a ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
To maintain the temperature within an anaerobic digester to within the mesophilic range of 35 – 38 Deg C, a sludge heating exchange system is used. A portion of the sludge is re-circulated continuously through a tube in tube type sludge heat exchanger using a sludge recirculation ...
-
Manufactured by Solamics Technology Ltd.based in UNITED KINGDOM
The Bunsen Unit is a solar powered heat pump. There are other types of heat pumps – Air source use the temperature from the air, Ground source us the temperature from the ground. The Bunsen uses the two external hot water panels which transfer heat from the air temperature, wind, rain, sunlight or even snow. All our natural elements have a contributing effect. The job of the Bunsen Unit, is ...
-
Manufactured by Sondex A/S - Member of the Danfoss Groupbased in DENMARK
Our SONDEX® plate and shell heat exchangers (SPS) are perfect choices for condensation and steam heating duties. A fully welded plate pack makes the heat exchangers well-suited for handling aggressive media as well as high pressure levels and temperatures. Less space demanding and much lighter in weight, they are good replacements for shell and tube heat ...
-
Manufactured by NSI Byosis BVbased in NETHERLANDS
Byosis developed a modular, easy to clean tube-in-tube heat exchanger specially designed for difficult substrates as digestate, manure or sludge. The modular lay-out makes it possible to adjust the size and capacity of the heat exchanger relatively easy. The heat exchanger can be mounted inside a building or outside in a specially designed, insulated, container. Due to the design, mechanical ...
-
Manufactured by Northeast Energy Systemsbased in USA
With our deep insights on project development of combined heat and power technologies, Jenbacher Type 4 installations provide substantial reduction of the environmental footprint in facilities that have consistent electrical and thermal requirements. Pushing the boundaries of efficiency in the 800 to 1500 kW power class, the Jenbacher Type 4 is characterized by its high power density and maximum ...
-
Manufactured by Hans Wilms GmbH & Co. KGbased in GERMANY
Fully automatic oil fired heaters with heat exchanger with high efficiency. For heating and ventilating of workshops, halls, exhibitionand and event tents as well as in the construction. Suitable for use with ductings. Robust, versatile useable construction. Mobile with wheels. Voltage: 230 V/50 Hz. Special high humidity thermostat with 10 m cable and oil preheater ...
-
Manufactured by I-Feeder Technologies (UK) Ltdbased in UNITED KINGDOM
Anyone who wants to disperse, emulsify, homogenise, chill, dissolve, mix, neutralise, stir, circulate or exchange heat efficiently is faced with a demanding task ? from a technical and physical point of view. The mixing effect that flows develop depends on the shape of the container, the material and of course the type of ...
-
Manufactured by Delta T Heat Exchangersbased in CANADA
Similar to the API Basco Type 500 heat exchangers, API Heat transfer offers an extensive line of hub type heat exchangers that are pre-engineered to provide the cost and design advantages associated with standard heat exchangers. API offers hub replacement exchangers for their Basco, Whitlock and Ketema designs as well as other manufacturers. Sizes from 2” shell diameter to 8” ...
-
Manufactured by CQM Group Ltdbased in ISRAEL
Clean tubes improve efficiency, heat exchange and thermodynamic processes. ATCS actually takes care of condenser cleaning while keeping the condensers at power stations and refineries clean of fouling. With perfectly clean tubes vacuum and therefore process quality are ...
-
Manufactured by Graham Corporationbased in USA
The Graham Heliflow Heat Exchanger is uniquely designed and engineered to handle difficult heat transfer applications. Graham created the Heliflow to be exceptionally versatile, yielding heat transfer rates that can be more than 40% better than typical shell and tube designs. The Heliflow Heat Exchanger encompasses a spiral coil of multiple parallel tubes mounted within a casing. The case/coil ...
-
Distributed by Brad Thompson Companybased in USA
The pressing need to lower emissions from fossil power plants has focused worldwide attention on renewable sources of energy such as solar, wind, geothermal and biomass. Concentrated Solar Power (CSP) plants have emerged as strong contenders for alternate sources of energy. Rapid advances in mirror technology have slowly but steadily narrowed the gap in the capital investment between solar power ...
-
Manufactured by Barriquand Technologies Thermiquesbased in FRANCE
Shell and tube heat exchangers are designed and manufactured in France to meet diverse energy needs with duties up to over 70 ...
-
Manufactured by Schmid Energy Solutionsbased in SWITZERLAND
The Novatronic XV log combustion system is suitable for use in a single house or apartment block as well as large farmhouses. Fuel: Wood logs. Novatronic XV 35: Wood logs 1/2 ...
-
Manufactured by D`Alessandro Termomeccanicabased in ITALY
Wood-Pellets combination boiler. Boiler shell with double combustion chamber and tubes nest; Insulated doors for inspection and cleaning operation; Copper heat exchanger for heat dissipation controlled by thermostatic valve; Electronic board for the working modalities direction; Voltage: 230 V. PELLET SOLUTION: Cast iron burner with mechanical firebox feeding; Variable speed screew for automatic ...
-
Manufactured by Raycapbased in GREECE
The RHEX-2868 heat exchanger provides excellent thermal performance with optimized control and low ...
-
Manufactured by PSI Pressure Systems Corp.based in USA
PSI is proud to offer the industry’s largest selection of Peinemann Equipment’s hands-free semi-automated tube bundle cleaning systems, rated up to 40,000 psi (2800 bar). Hands-free systems ensure a safer workplace for our customers, allowing operators to remotely control the equipment while stationed away from the blast site. After positioning the system’s guide tube against ...
-
Manufactured by Eneko Heat Recovery Ventilationbased in TURKEY
EVER Series Units are used in offices, homes, hotels, schools, to provide fresh air up to 4000 m3 / h and to exhaust polluted air. Low energy consumption and low noise level with Plug Fan. Cellulosic heat recovery exchanger with high efficiency, sensible and latent heat transfer. Advanced automation system. Plug & ...
-
Manufactured by Vaillant UK Ltd.based in UNITED KINGDOM
If space is at a premium in your home, the cupboard-size ecoFIT pure regular open vent boiler is the choice for you. It’s designed to be flexible, with a rear flue option available to give you more choice where you put it. But being lightweight and compact, doesn’t mean you have to compromise on comfort. The ecoFIT pure’s powerful aluminum heat exchanger which offers outstanding ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you