Only show results available in Virginia? Ok

Heat Pumps equipment for Energy Management

  • Showcase

    GIG Karasek - Model MVR - Mechanical Vapour Recompression

    If electricity is cheaper than steam generation, we recommend vapour recompression with electrical energy. During the mechanical vapour recompression, vapours are recompressed to a higher pressure. The compressor operates like a heat pump. Here steam is only used for starting up the unit. Depending on application (elevation of boiling point, heat ...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA. from Evaporation Technology Product line

  • Premium

    GIG Karasek - Model TVR - Thermal Vapour Recompression

    Evaporators with thermal vapour recompression technology use a part of the vapours to heat the unit. To this end, vapours are absorbed by an ejector and the vapours recompress up to a higher pressure. The ejector is usually designed for specific working points and works on a jet pump principle. It has no moving parts, which guarantees a simple ...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA. from Evaporation Technology Product line

  • Ekotec - Model ETH-10M - Air Source Heat Pump Monoblock

    DESCRIPTIONTECHNICIAL SPECIFICATIONSDimensions (W / H / D) : 1470/900/900Weight :Max. Operating Temperature : 60°CHeat Source : Air (Monoblock)Usage Areas : Heating, Cooling, Hot WaterOrigin : TurkeyWorking Efficiency 2 ...

  • RESOL - Model VA300 - Changeover Valve

    The 3-port valve RESOL VA300 is used for distribution of flow rates of bivalent heat sources or heating storages, e.g. in the solar and heat pump technology (temperature of the media: up to 120 °C, only for a short time up to 140 °C).

    By Resol GmbH based in Hattingen, GERMANY. from Valves Product line

  • Morrill - Model 600 Series - Engine Heat Exchanger

    Morrill Industries, Inc. offers our 600 Series Heat Exchanger for your Diesel, Gasoline, Propane or Natural Gas Engine. Our 600 Series Heat Exchangers are designed to replace the existing Fan and Radiator on your current engine. This increases available Horsepower for your pumping needs while reducing your Operating costs. Our Standard units are ...

    By Morrill-Industries, Inc. based in Escalon, CALIFORNIA (USA). from Heat Exchangers Product line

  • Model PC R Series - Heat Pump Scraped Vacuum Evaporators

    The PC R series evaporators have a heating system based on a heat pump and operate under vacuum at 5kPa and around 30°C (86°F). Heat exchange occurs within a conical jacket, and the boiling chamber inside part is cleaned by internal scrapers that continuously stir concentrate. This configuration is designed to produce a concentrate with a ...

    By EVALED-Evaporator based in Zoppola (PN), ITALY. from Heat Pumps Product line

  • Evans - Designed Chevy Coolant Pumps

    Small block and big block Chevy racing pumps are manufactured by Evans. They feature 356-T6 aluminum heat treated housings and Evans CAD CAM designed 8-vane 4.4” O.D. high efficiency impeller, which is capable of the highest gallon per minute flow rate in the industry. The pump eye and inlet cross section have been increased by 20% for ...

    By Evans Cooling Systems, Inc. based in Suffield, CONNECTICUT (USA).

  • CONfix - Model 550 S EEx - Heat Pump Evaporator

    Materials : Stainless steel (904 L) Steel-rubber coating. Refrigerant : Coolant R134a. Destillate Capacity : 550 l/h. Customer : in Germany. Task : Ethanol regeneration Residue containing H3PO4 with contamination Ex-proofed version (ATEX).

    By Schulz Partner GmbH based in Teningen, GERMANY. from Solvent Recovery Product line

  • Falling Film Evaporator

    The Swenson Falling Film long tube vertical evaporator is preferred for heat sensitive liquors. A film of liquor flows down the inside of a tube and is circulated to maintain the required flow.Because of the circulating pumps on each effect maintaining the wetted tube surfaces these evaporators have excellent turndown capabilities.

    By Swenson Technology, Inc. based in Monee, ILLINOIS (USA). from Evaporators Product line

  • emz - Heat Pump

    The solar radiation will be absorbed by air, water, soil or buildings. A heat pump can transform this low temperature heat in a profitable manner to a higher temperature for heating purposes. So heat pumps are used for heating, cooling and production of domestic hot water. The partly complex process operations are managed by adequate ...

    By emz - Hanauer GmbH & Co KGaA based in Nabburg, GERMANY. from Heat Management Product line

  • Ground Source Heat Pumps

    Terra Therma have installed many Ground Source Heat Pumps (GSHPs) in the South East, from relatively simple horizontal ground collectors, to more complex bore hole systems. We have a wealth of knowledge in ensuring the correct unit is selected and more importantly that ground collectors, either horizontal or bore holes, are sufficiently sized to ...

    By Terra Therma Ltd based in Heybridge, UNITED KINGDOM.

  • MAXI-FLO - Model MF 135 - Stainless steel - Heat exchanger

    Acid-proof stainless steel AISI 316L- For optimum quality and life. Precision-welded outer jacket - For optimum finish and long life. 37 seamless pipes equipped with flow restrictors - For high heat transfer capacity. Adjustable brackets of acid-resistant stainless steel - For simpler and more flexible installation. Four sizes: 40,60, 75 and 120 ...

    By OPTIMUZZ 7Islas S.L based in Tenerife, SPAIN.

  • SPRSUN - Model CGK/C-18 - air to water heat pump for heating + hot water

    air to water heat pump for heating + hot water function, heating capacity 18kw, power supply 380v/3ph/50hz, R410A refrigerant, Copeland compressor, with 3-way valve installed to the system, heating & hot water function can be both achieved with hot water priority

  • Buderus Logatherm - Model GWPS 192i - Gas Heat Pump

    Gas heat pump: Heating technology of the future for single and two-family homes: For the low output range, modulating up to 18 KW, Flow temperatures up to 70°C, Ideal for the modernisation of homes, Market launch in mid-2016

    By Bosch Thermotechnik GmbH based in Wetzlar, GERMANY.

  • TECH - Model ST-22 - Charging Boiler Controller

    Controller Functionality; Providing control for the blow and the central heating pump.

    By TECH based in Wieprz, POLAND. from Controllers - Pump Controllers Product line

  • Model MHCC - Weather Compensated Heating Controller

    Weather-compensated heating controller for a mixed heating circuit, pump and heat request.

    By SOREL GmbH Mikroelektronik based in Wetter (Ruhr), GERMANY. from Heating Product line

  • pewo - Model Therm IDD - Consumer Unit

    Consumer substation with integrated indirect space heating circuit, suitable for local micro heating networks. pewoTherm IDD is a heating substation with an indirect heating circuit and domestic hot water preparation by the hygienic continuous flow principle and using a plate heat exchanger. The TFS controller keeps the water temperature constant. ...

    By PEWO Energietechnik GmbH based in Elsterheide, GERMANY. from Heat Transfer Stations Product line

  • CO2 Heat Pumps

    Under the brand name thermeco2 the company Dürr thermea GmbH manufactures high-temperature heat pumps, chillers and compressed-air refrigeration dryers for industrial applications and building technology. All thermeco2 machines are operated with the climate-neutral refrigerant CO₂.

    By Olpidürr S.P.A based in Novegro di Segrate (MI), ITALY. from Other Products Product line

  • Rape Seed Oil Burner for Hot-Air Boiler

    Facts about rape seed oil: Rape seed oil compared to everyday fuel oil has a slightly lower energy content. For each litre of fuel oil approximately 1.05 – 1.10 litres of rape seed oil is needed. That is to say, approximately 5 – 10 % more oil for the same output. In addition to the lower energy content, rape seed oil also includes ...

    By TORNUM AB based in Kvänum, SWEDEN. from Heating Product line

  • Heat Pump Collector

    For the combination of heat pump and solar, there are special requirements with regard to the collector. When integrating the solar installation directly, the low return flow temperatures in the collector have to be considered because they will ineviably lead to condensation inside the collector if the ambient temperature is accordingly ...

    By STI Solar-Technologie-International GmbH based in Meerane, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you