Heat Pumps Equipment For Energy Management In USA
-
PremiumManufactured by C&G Depurazione Industriale S.r.l.based in ITALY
Energy Saving: The refrigeration plant has two boiling chambers: the high pressure side is used to bring the product being treated to boiling point in the first boiling chamber, while the low pressure side is used to condense the steam produced in the second stage. This allows an energy saving of about 45%. Volumes processed 150 - 40,000 ...
-
Manufactured by Signal Group Ltdbased in UNITED KINGDOM
A medium duty heated pre-filter unit is installed in the 19' Rack housing of the analysers. The Prefilter is fitted with a choice of either one (Model 361) or two (Model 362) filter streams (for either two sample points, pre/post cat or twin cells). The units incorporate a heated head sample pump, gas distribution needle valve manifold, back pressure regulator, The unit provides 3 heated outputs ...
-
Manufactured by Canariis Corporationbased in USA
Canariis Corporation offers a wide variety of heating water packages from small constant speed systems to large central plant systems. Our experienced designers are ready to assist in designing a system to meet your requirements. The benefits of a package over field assembled systems include: increased system efficiency, single source responsibility, third party certification, factory testing and ...
-
Manufactured by Pfister Energybased in USA
Geothermal heat pumps are among the most efficient and comfortable heating and cooling technologies, but instead of using heat found in outside air, they rely on the stable, even heat of the earth to provide heating, air conditioning and hot water. The heat pump equipment works like a reversible refrigerator by removing heat from one location and depositing it in another location. Installing a ...
-
Manufactured by Hydro-Temp Corporationbased in USA
3Star Series (Model: RAV/RAH/RAC/RAS/RAR); Sizes: 2.5, 4.0,6.0 Tons EER's up to ...
-
based in FRANCE
The TPC-B Thermal Fluid Heater is a vertical, multi-pass, fired heater with a long pedigree of both design and construction. The downward fired configuration ensures stress free and unrestricted expansion of the heater coils during normal operation. The heater has been designed to operate in a diverse range of industries and with a wide variety of heat transfer fluids. A variety of liquid or ...
-
by Solar Sourcebased in USA
Solar pool heating is the most efficient and cost-effective way to heat your swimming pool. Say goodbye to pool heating costs and start saving hundreds or thousands each year by switching to solar pool ...
-
based in USA
Water-to-air unit: These models employ a forced-air distribution system to provide both heating and cooling through a conventional ductwork system. These units are ideal for both new and retrofit construction. ...
-
Manufactured by Total Green Manufacturing (Mfg.)based in USA
Standard Features: Refrigerant Based (Water-Free) Geothermal Heat Pump System, Two-Stage Forced Air DX Heating and Cooling, Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Smart Logic Controller, Zoning Friendly Capabilities, Dual Fuel Friendly Controller, Enhanced Compressor Protection, 2 Stage Controller, Standardized Mechanical Refrigerant Controls, High-Efficiency Copeland ...
-
Manufactured by Grundfosbased in DENMARK
UPS is a three-speed circulator pump designed for heating and air-conditioning systems and is also used for central and district heating systems. The pump provides reliable and maintenance-free ...
-
Manufactured by AERCO International- Watts Water Technologiesbased in USA
The Benchmark® Platinum is AERCO’s most advanced commercial condensing boiler yet featuring a powerful bundle of innovative technology and components that optimize your premium system and maximize efficiencies by up to an additional 9% ...
-
Manufactured by PaceControls LLCbased in USA
In heating applications, the PACE3 suite addresses a source of inefficiency in heating control systems known as the “flywheel effect”: the chain of hysteresis (time delays) in the heating unit’s response to the thermostatic call, either from a dedicated thermostat or a building management system. ...
-
Manufactured by Jet-Lube Inc.based in USA
Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin nongreasy film that prevents additional moisture from clinging or entering. Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt ...
-
Manufactured by Roth Industry GmbH & CO. KGbased in GERMANY
Heat pumps that use the outside air which is available everywhere as a heat source, are cheaper to buy than other heat sources. They also do not need approval and are quick and easy to install. Air/water heat pumps are suitable for inside and outdoor ...
-
Manufactured by Niles Steel Tank Company (NST)based in USA
The Niles Steel Tank Hydraulic Separator is designed to help reduce short cycling of a boiler system and separate building and boiler circulation. The NST Hydraulic Separator uses stored boiler water to bu?er the system load when the boiler is producing more BTU’s than what the building can handle. When the building has a minimal demand, it pulls from the tank allowing the boiler to ...
-
Manufactured by Enertech Global, LLCbased in USA
Revolution Series Combination models are among the most versatile geothermal heat pumps available. They can provide forced air heating, forced air cooling, domestic hot water, plus hot water for radiant floor heating, all in a single ...
-
Manufactured by Hayward Pool Productsbased in USA
High performance, energy-efficient HeatPro heat pumps quietly and economically maintain the ideal water temperature at all times. HeatPro features the industry's only standard Ultra Gold corrosion resistant evaporator fin which provides extreme durability, especially in coastal environments. It's compact design allows for easy installation and service on new or existing ...
-
Manufactured by Enertech Global, LLCbased in USA
Hydron Module's Split model is the next generation of geothermal innovation, incorporating best-in-class features into a compact, efficient and ultra-quiet system. The Split system is among the most versatile geothermal systems available. They can provide ducted heating and cooling, as well as domestic hot water. They can also be used with a conventional furnace to create a dual-fuel ...
-
Manufactured by GeoComfort - a brand by Enertech Global, LLCbased in USA
The GeoComfort RT outdoor split heat pumps can provide forced air heating and cooling, hot water assists for 25% - 40% savings on hot water costs annually, or can be used with a conventional furnace to create a dual-fuel system for optimal energy savings. The RT models are similar to the BS/BT indoor split systems, except the RT is installed outside, making these systems perfect for applications ...
-
Manufactured by Carrierbased in USA
The Carrier 38VMH single-phase VRF heat pump system is a combination of an outdoor unit with multiple style indoor units connected by refrigerant piping and wiring. The outdoor units have stacked dual condenser fan with side blow ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you