Only show results in Virginia? Ok

Heat Recovery equipment for Energy Management

  • Premium

    Anguil - Industrial Energy & Heat Recovery Solutions

    Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    B&W Megtec - Process Energy Optimization & Heat Recovery

    MEGTEC’s industry-leading experience in air handling, drying, heating, cooling, process and combustion control can help improve the operating efficiency of your facility and maximize the performance of your equipment. By analyzing current process energy usage, we can offer solutions to reduce your energy consumption.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA). from Process Energy Optimization & Heat Recovery Product line

  • Premium

    Gas Turbines - HRSG

    Co - Oxidation Catalyst / Natural Gas: A high performance oxidation catalyst system and carbon steel housing that can be designed and manufactured to fit all sizes of gas turbines.

    By Catalytic Combustion Corporation based in Bloomer, WISCONSIN (USA). from Gas Turbines - HRSG Product line

  • Premium

    Waste Exhaust Heat Boilers

    Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling circuits. ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Waste Exhaust Heat Boilers Product line

  • Premium

    Exhaust Gas Heat Exchangers (EGHE)

    Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Exhaust Gas Heat Exchangers (EGHE) Product line

  • Premium

    GE Jenbacher - Diesel Genset

    A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Diesel Genset Product line

  • Premium

    Addfield - Thermal & Electrical Energy Recovery Systems

    Our range of heat recovery systems using proprietary combustion will allow you to dispose of any on-site waste cleanly and efficiently using a range of sizes that produce electricity and hot water. The WP40 Waste to Power unit is our most popular unit producing 40kW 415 volt electrical and 350kW thermal from low capacity combustion. The unit is CE ...

    By Addfield Environmental Systems Ltd. based in Burntwood, UNITED KINGDOM. from Thermal & Electrical Energy Recovery Systems Product line

  • Power Generation

    Lipten doesn’t stop at just steam generation; we take it to the next step to integrated power generation. Whether single purpose or CHP (Combined Heat and Power), we can put together a system tailored to your requirements. Whatever the source, be it gas, oil, biomass or waste heat, Lipten can turn it into useful power through clean, ...

    By Lipten Company based in Wixom, MICHIGAN (USA).

  • Orcan - Model ePack - Electricity Generation Modular

    The ePack from Orcan Energy is a modular solution for electricity generation from a variety of waste heat sources. It is based on the ORC technology, and it operates without human intervention and is virtually maintenance free. The result is an electricity grid-compatible, CO2-free source of electricity.

    By Orcan Energy AG based in Munich, GERMANY.

  • Cogeneration Technology

    Cogeneration technology generates both electricity and usable heat. It is useful in industrial facilities where vapour and/or hot water are needed and, in general, in any facility that uses heat or cold, or in facilities where waste heat can be recovered to generate electricity. In Spain, cogeneration technology, like other renewable energies, ...

    By Montealto based in Córdoba, SPAIN. from Cogeneration Technology Product line

  • Lundberg - Digester Heat Recovery System

    Lundberg designs heat recovery systems for most continuous digesters found in pulp and paper mills. These heat recovery systems can be designed for Kamyr™, Pandia™, M&D™ and other continuous digesters.

    By Lundberg, LLC based in Bellevue, WASHINGTON (USA). from Digester Heat Recovery System Product line

  • Flares With Integrated Heat Recovery System

    The task of flares is the environmentally sound combustion of excess gases. The operational circumstances often put limitations to the utilization of the energy released. It is desirable to use this excess energy in order to avoid the negative image of 'energy destruction'.

    By C-deg environmental engineering GmbH based in Kiel, GERMANY.

  • CONfix - Model 550 S EEx - Heat Pump Evaporator

    Materials : Stainless steel (904 L) Steel-rubber coating. Refrigerant : Coolant R134a. Destillate Capacity : 550 l/h. Customer : in Germany. Task : Ethanol regeneration Residue containing H3PO4 with contamination Ex-proofed version (ATEX).

    By Schulz Partner GmbH based in Teningen, GERMANY. from Heat Pump Evaporator Product line

  • CDS Airtek - Heat Treatment Ovens

    Designed, manufactured and installed by Airtek, this range of ovens for curing glass fibre, carbon fibre and other composite materials is available in both batch and conveyorised configurations. Energy requirements are kept to a minimum by the design methodology used for the insulation on all hot surfaces including all ductworks and fans. A built ...

    By CDS Airtek based in Stoke on Trent, UNITED KINGDOM. from Heat Treatment Ovens Product line

  • AccuCoat - Heated Spray System

    AccuCoat® Heated Spray Systems eliminate the problems associated with traditional viscous coating application methods. The automated spray system provides precise temperature control, accurate coating placement and many automated features to eliminate waste and reduce downtime between batches.

    By Spraying Systems Co. based in Wheaton, ILLINOIS (USA). from Heated Spray System Product line

  • Model CEO- ES-EC - Heat Recovery Ventillator

    150m3/h -16.500m3/h Air Flow. Cellulose Based Heat Exchanger, %90 Heat Recovering Efficiency. EC/AC Motor & Plug Fan. Free Cooling. Sensible & Latent Heat Transfer. Removable Heat Exchanger and G4 Filter. Microprocessor Control. Side Service Door

    By RD Grup based in Kısıkköy, TURKEY. from Heat Recovery Ventillator Product line

  • Dustex - Heat Exchangers

    Dustex designs & manufactures air to air heat exchangers for gas cooling & heat recovery purposes for industry & utility applications.Heat exchangers are custom designed & suited to handle abrasive particulate laden gas.

    By Dustex Corporation based in Kennesaw, GEORGIA (US) (USA).

  • HRS - Model MR Series - Food-Grade Multitube Heat Exchanger with Direct Heat Recovery

    The MR series heat exchanger is an all stainless steel shell and tube heat exchanger for the food industry, specially designed for product to product heat recovery. The product to be heated or cooled flows both through the interior tubes and the surrounding shell. The MR series has a removable tubebundle that allows hygienic processing also on the ...

    By HRS Heat Exchangers based in Lorquí - Murcia, SPAIN. from Food-Grade Multitube Heat Exchanger with Direct Heat Recovery Product line

  • Heat & Energy Recovery

    Claro provides complete heat and energy recovery systems for municipal, industrial, and agricultural applications. We can recover up to 85% of outgoing heat energy from process tanks such as anaerobic digesters with Claro modular tube-in-shell or large gap heat exchangers. Energy cost-savings are immediate and translate into very quick pay-back ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Heat & Energy Recovery Product line

  • Short Path Evaporators

    PESCO-BEAM designs and builds self-contained evaporation systems customized to your needs.

    By PESCO-BEAM based in Roanoke, VIRGINIA (USA). from Short Path Evaporators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you