Heat Recovery Plant (Heat Recovery) Equipment
-
Manufactured by INTEC GMK GmbHbased in GERMANY
INDUCAL-„industrial caloric" describes our organic rankine cycle-waste heat recovery product line that makes it possible to recover waste heat efficiently from industrial plants, such as glass and steel mills or big engines for the generation of electricity. The primarily named waste heat sources nowadays ...
-
Manufactured by TVT Termoventiltecnica S.r.l.based in ITALY
Heat recovery plant producing superheated water with pressure of flue gas from dump biogas co-generation plant. Recovered heat is used to treat dump liquid thereby reducing the operating ...
-
based in INDONESIA
Rinheat has supplied more than 80 heat transfer units for TMP and CTMP plants all over the world. Rinheat TMP heat recovery system is designed to recover the heat from the dirty steam generated in thermo-mechanical pulping. The construction is all stainless steel and there is a built-in droplet separator. The ...
-
Manufactured by I+M GmbH & Co.KGbased in GERMANY
Utilization of surplus heat 55-105°C out of external processes makes the big difference at i+M-Drying Plants: Heat recovery on WWTP. Heat utilization CHP, district heat. Post operation after high temperature ...
-
Manufactured by I+M GmbH & Co.KGbased in GERMANY
Utilization of surplus heat 55-105°C out of external processes makes the big difference at i+M-Drying Plants: Heat recovery on WWTP, Heat utilization CHP, district heat, Post operation after high temperature ...
-
Manufactured by Bertsch Energy GmbH & Co KGbased in AUSTRIA
The waste heat from industrial processes offers significant savings potential in primary energy costs. Tailored BERTSCHenergy heat recovery boiler plants ensure optimum heat recovery and reduces the overall energy consumption. Depending on requirements, the recovered heat can be ...
-
Manufactured by ALZ GmbHbased in GERMANY
facilities as well as airheating in drying plants. Heat recovery from flue gas is another possible application. ...
-
Manufactured by Lundberg, LLCbased in USA
Heat recovery from a TMP plant is available at a number of different levels depending upon a given mill's process and heat utilization requirements. Primary TMP refiners operating at elevated pressures blow their pulp at these pressures generating contaminated steam. This steam can be recovered as clean steam at a slightly ...
-
Manufactured by Tezel Isıtma Soğutma Havalandırma Ltd. Şti.based in TURKEY
Moisture and condensing water released in indoor pools cause serious structural damage to buildings, but also shortens the life of the building. High capacity pool dehumidification plants designed by TEZEL engineers provide all comfort conditions and guarantee to extend the structural life of the building. 2.500 m3/h – 25.000 m3/h flow ...
-
Distributed by OMVbased in AUSTRIA
Electrical Power is used for a variety of applications: In daily life we use it for electrical appliances, cooking, heating, cooling, ...
-
Manufactured by Plate Concepts, Inc.based in USA
Our Free Flow Plate Heat Exchangers maximize heat recovery from fibrous or viscous fluids with minimal maintenance. Free Flow or Wide-Gap plates are specially designed with no metal to metal contact and large gaps (5 mm to 11.5 mm) between plates in the liquid area – allowing large particles to pass through the exchanger with minimal ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Two cylinders, single LP cylinder. This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical although control stage versions can be supplied as well. This ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. Machine of this configuration may be realized with or ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, same flow direction for the entire bladed path. Full arch admission with reaction blades as well as control stage version are available. Very simple mechanical scheme to meet the highest performance and reliability standards of a wide and diversified market, from industrial applications to geothermal needs. High speed and direct coupling ...
-
Manufactured by Electrotherm (India) Ltd. | E&T Divisionbased in INDIA
Coal Based Rotary Kiln for Direct Reduced Iron / Sponge Iron (100 TPD, 350 TPD, and 500 TPD) Solid-state reduction of Iron Ore using either coal/gas as a medium of reduction to produce a substitute raw material for steel making is termed as Direct Reduced Iron (DRI). Since DRI is produced by removing oxygen from iron ore, its structure is just like a sponge with a network of connecting pores. ...
-
Manufactured by Zhengzhou Boiler Co., Ltd. (ZBG)based in CHINA
CFB Power Plant Boiler is a kind of large scale heating equipment applied in thermal power plant and other industries for power generation, it has the features of fuel flexibility, high combustion efficiency, low NOx, SOx emission, it is the good clean heating or power ...
-
Manufactured by BioprocessH2Obased in USA
bioprocessH2O designs, manufacturers, and installs wastewater and water reuse treatment systems customized to a wide variety of industries. bioprocessH2O offers sustainable heat recovery and solar energy solutions as part of our equipment packages to reduce energy consumption and energy demand for industrial ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
This type of machine is made by a HP/IP combined cylinder plus a double flow LP turbine (HIC-DL). The same concept is applied with two LP turbines when larger exhaust areas are needed. State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined ...
-
Manufactured by CSM Worldwide, Inc.based in USA
With the price of energy continually rising, conserving energy is an absolute necessity. It is no longer economically viable for manufacturing or processing plants to emit clean, heat-laden exhaust into the atmosphere without first reclaiming a significant portion of that energy. CSM is in the forefront of waste heat recovery ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you