Showing results for: Waste Heat Engine (Heat Recovery) Equipment
-
Manufactured by Cyclone Power Technologies, Inc.based in USA
Cyclone’s Waste Heat Engine (WHE, pronounced “we”) recaptures heat from external sources to create steam which powers the engine. The WHE models are designed to run a grid-tied or primary electric power generator while producing ZERO Emissions. All WHE operations are currently run through ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an ...
-
Manufactured by Shenton Groupbased in UNITED KINGDOM
Power Therm is shentongroup‘s complete combined heat and power station offering. Running on natural gas, Power Therm captures all the waste heat from its engine, and turns it into useful hot water, making it over 85% efficient! The reduction in C02 is significant. Power stations feeding the national grid are only about 35% ...
-
Manufactured by Qnergybased in USA
The Glycol HQat TracQ (GHT) feature allows for th9 waste heat from the Stirling engine and it's exhaust to be used by the customer. A plate heat exchanger is used to separate the engine coolant and the GHT media. The GHT media is circulated using a rotary vane pump on a variable speed motor. The PowerGen monitors ...
-
Manufactured by INTEC Engineering GmbHbased in GERMANY
Heat recovery is an effective way to improve the efficiency of the plant and reduce operating costs. In order to recover the heat contained in the waste gas coming from solid fuel firing systems, combustion engines, gas turbines, or other industrial processes, INTEC offers you first-class, tailor-made solutions for a wide variety ...
-
Manufactured by Powerphasebased in USA
Turbophase lets gas turbines operate at optimum power and fuel efficiency, no matter the environmental ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
altogether the transport and distribution losses. Producing electricity from gas is highly efficient and losses reduction is of paramount importance. Gas engines are well suited to operation in island mode ...
-
based in UNITED KINGDOM
Worldwide there is an estimated 40,000GWhe of energy lost from steam systems. The Heliex Steam expander provides a method to recover some of these ...
-
Manufactured by Systema S.p.A.based in ITALY
Two-stage direct-fired absorption chiller/heater SYDFA BYZ.Economically providing efficient chilled water for air conditioning, hot water for heating and sanitary hot water (simultaneous or ...
-
Manufactured by Aningas-Ergos S.A.based in SPAIN
ANINGAS Thermal fluid heaters from 10.000 kcal/h to 10.000.000 kcal/h. Maximum service temperature up to 410ºC ...
-
Manufactured by Selnikelbased in TURKEY
Selnikel provides complete design, manufacturing, erection and commissioning services for the water tube and smoke tube type waste heat recovery boilers. Waste heat boilers can be designed with single or double pass. HRSG (Heat Recovery Steam Generation) systems are installed behind gas turbines and furnaces. ...
-
Manufactured by INTEC GMK GmbHbased in GERMANY
ORC systems for generating power from low temperature heat sources. For the conversion of thermal energy, which is available as hot water at a temperature from 85 °C, INTEC GMK can offer the latest development on the basis of the screw expander technology. Technical principle of our low temperature ORC systems is the Organic Rankine ...
-
Manufactured by Aningas-Ergos S.A.based in SPAIN
Steam boilers, hot water boilers and superheated water boilers: Steam Shell boilers from 250 to 50.000 kg/h. Design pressure PS up to 25 bar. Saturated steam or superheated steam. Hot water boiler from 60.000 to 20.000.000 kcal/h and superheated water to 190ºC. Sprint steam generators (water-tube) from 300 to 2.000 ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a ...
-
Manufactured by Climeon ABbased in SWEDEN
Creating a Sustainable Future With Waste Heat Recovery. Convert Waste Heat Into Clean, Carbon-Free Electricity With Climeon HeatPower ...
-
Manufactured by Kuhn Technische Anlagen GmbHbased in GERMANY
A millennia-old method of pumping river water or sewage has conquered the world of hydro power generation. The "Archimedean screw" - also known as the "water screw" - is thousands of years old. It is used to pump large volumes of water at relatively low heads and is extremely reliable and durable so application operators are fully satisfied. Systematic consideration of how to utilize all the ...
-
Manufactured by Eralp Makina Kazan Kimya Ltd. Sti.based in TURKEY
Waste heat boilers produced from alloy, high alloy and stainless steel according to physical properties, content, flow and process conditions of gas are designed and produced to be Water Pipe Waste Heat Boilers and Flame Smoke Pipe Waste Heat Boilers. In the gas engines and in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you