Heat Recovery Equipment For Energy Management In Africa
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases by passing them through a gas tube heat exchanger. Cool ambient air is blown across the hot heat exchanger tubes, which provides heated clean air for factory space heating, pre-heated combustion air or process ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases, by passing them through a gas tube heat exchanger. Heat is exchanged with the external water jacket, generating hot water for district heating or for industrial ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a super-heater to produce a dry steam to drive a ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems can be used to achieve overall system efficiencies of ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the diary industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the dairy’s cooling ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...
-
Manufactured by Güntner U.S. LLC.based in USA
Corrosion resistant. Fail-safe operation. Six possible gap types (combined). Compact design, low space requirements. Capacity can be adjusted by adding or removing plates. Excellent fouling resistance due to high turbulence and smooth surfaces. Food-safe materials. Product-friendly design. Reliable ...
-
Manufactured by Muntersbased in USA
Des Champs heat exchangers offer designs utilizing plate counterflow heat exchangers, heat pipe, and energy recovery wheels. These heat exchangers form the backbone of many system configurations and can be configured with unique traversing frost prevention. Des Champs heat exchangers have been used everywhere from the hottest climates to ...
-
based in FRANCE
Regenerative Oxidisers are used where there is no requirement for heat recovery, or the amount of heat that can be recovered is too small to justify a Thermal Recovery Oxidiser. They are also well suited to processes that discharge high volumes of exhaust with relatively low VOC content. ...
-
by Waterleaubased in BELGIUM
The HELIOSOLIDS fluidized bed reactor is a fluidized bed furnace for the staged combustion of wastewater sludge, bio-solids, industrial sludge and fine solids. The reactor features integrated heat recovery, a stable fluidization and combustion process, and integrated flue gas ...
-
based in FRANCE
The SteamPack boiler from Babcock Wanson combines the best available technology in boiler design with very high efficiency resulting in low operating costs and reduced emissions. The boiler is designed to meet the latest European environmental legislation in terms of pollutant emission and can even exceed regulations requirements when fitted with Babcock Wanson combustion ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive acid by-products. Systems of this nature typically include ...
-
Manufactured by Muntersbased in USA
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
-
Manufactured by Muntersbased in USA
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
-
Manufactured by Muntersbased in USA
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you