Heat Recovery Equipment For Energy Management In Michigan
-
Manufactured by Quantalux, LLCbased in USA
Quantalux has a joint development agreement with BioWorks Energy in Flint Michigan to develop new technology solutions for anaerobic digester systems at wastewater treatment plants. (See http://www.bioworksenergy.com ). The Flint Biogas Plant includes an anaerobic digester and combined heat and power (CHP) electrical generator (600 kW+). The facility can be used as a pilot scale testing facility ...
-
Manufactured by Kodiak Groupbased in USA
Escher designs and manufactures recuperative heat exchangers and gas stream coolers for use in iron melting cupolas, glass melting, and other high energy use applications. Escher heat exchange equipment has been in use since 1956 and has earned a worldwide reputation for quality. Their recuperators capture energy normally lost to the atmosphere and recirculate it back into the process. This ...
-
Manufactured by Muntersbased in USA
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
-
Manufactured by Muntersbased in USA
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
-
Manufactured by MAHLE GmbHbased in GERMANY
Applying its high-level systems expertise, MAHLE develops holistic thermal management solutions for electric vehicles, which cover interior temperature control as well as thermal management of the technical drive components. E-mobility will be a key component of CO2-neutral individual transportation over the long term. MAHLE aims to be one of the innovation drivers in this field too. The refined ...
-
Manufactured by MAHLE GmbHbased in GERMANY
Today’s fuel-efficient engines do not always deliver sufficient waste heat to enable rapid heating of the vehicle cabin, particularly for cold starts and in certain driving conditions. To keep the windows clear and ensure optimum thermal comfort in these situations, additional heating is provided by electric PTC auxiliary heaters that run on energy from the vehicle electronics. The heaters ...
-
Manufactured by Muntersbased in USA
Des Champs heat exchangers offer designs utilizing plate counterflow heat exchangers, heat pipe, and energy recovery wheels. These heat exchangers form the backbone of many system configurations and can be configured with unique traversing frost prevention. Des Champs heat exchangers have been used everywhere from the hottest climates to ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
ORC stands for “Organic Rankine Cycle” – a procedure that uses waste heat to produce electricity with the aid of an evaporation ...
-
Manufactured by Climate Technologies Corp.based in USA
A small industrial gas turbine combined with an innovative combustion chamber designed to burn regulated volatile organic air emissions as a secondary fuel, is a surprising economic game changer for manufacturing companies seeking energy efficiency, reduced carbon emissions, competitiveness and profitability. Feasibility assessments typically result in very short return on investment periods and ...
-
Manufactured by Muntersbased in USA
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
-
Manufactured by Muntersbased in USA
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
-
Manufactured by Muntersbased in USA
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you