Only show results in Michigan? Ok

Heating Systems equipment for Energy Management

  • Premium

    ACME - Model CEJW - High Voltage Hot Water Immersed Electrode Boiler

    These Electrode Boilers have unlimited application possibilities wherever a need for process or space heating exists.

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    Z-Duct - Model Series 84 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    CECO Aarding - Gas Plant Guillotine Dampers

    Guillotine Dampers are used when tight shut-off is required to isolate specific portions of an exhaust gas system for maintenance or by-pass purposes. Our Peerless-Aarding brand Gas Plant Guillotine Damper is a heavy-duty design commonly used in heat recovery steam generator (HRSG) systems. Our custom designs have proven reliable in some of the ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Dampers Product line

  • Premium

    ACME - Model ES Series - Small Standard Electric Steam Superheaters

    ACME Electric Steam Superheaters are available for use with steam boilers as an auxiliary piece of equipment. Our superheaters are all custom made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    Munters Z-Duct - Model Series 74 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    Z-Duct - Model Series 85 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    TOMRA - Energy Saving Upgrades

    TOMRA Sorting Food provides a range of energy saving upgrades to enhance the performance of the peeling line equipment.

    By TOMRA Sorting GmbH based in Asker, NORWAY. from Peeling Equipment Product line

  • Premium

    Munters Z-Duct - Model Series 75 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    CECO Aarding - Gas Plant Diverter Dampers

    Diverter dampers are isolation devices that are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. The Peerless-Aarding brand Gas Plant Diverter Damper can be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for HRSG, waste heat recovery, natural gas turbine, and other ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Dampers Product line

  • Premium

    Munters - Model Series 79 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    Munters Des Champs - Heat Exchangers and Energy Recovery Wheels

    Des Champs heat exchangers offer designs utilizing plate counterflow heat exchangers, heat pipe, and energy recovery wheels. These heat exchangers form the backbone of many system configurations and can be configured with unique traversing frost prevention. Des Champs heat exchangers have been used everywhere from the hottest climates to ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    CECO Aarding - Gas Turbine Exhaust Systems - Heat Recovery Steam Generator (HRSG) Baffles

    Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules where ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

  • Premium

    Inciner8 - Heat Recovery System

    Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process.

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Incinerators by Application Product line

  • Premium

    ACME - Model GS Series - Gas Fired Steam Superheaters

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    Inciner8 - Heat Exchangers System

    Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Waste to Energy Product line

  • Premium

    ACME - Model ES Series - Large Electric Steam Superheaters

    Acme Electric Steam Superheaters are available for use with steam boilers as an auxiliary piece of equipment. Our superheaters are all custom made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    GIG Karasek - Thin Film Evaporator

    Special solutions for demanding tasks The Thin Film Evaporator made of high quality materials provides the highest performance and allows even to separate sensitive products in small quantities. Depending on the manufacturing and product requirements, we develop for each of our clients tailor-made distillation modules. Their heartpiece – ...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA. from Thin Film / Short Path Technology Product line

  • Premium

    CECO Effox-Flextor - Diverter Dampers

    Diverter Dampers are tight shut-off devices used to redirect hot gas flow from one outlet to another, and are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. Our Effox-Flextor brand Diverter Dampercan be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Effox-Flextor - Dampers Product line

  • Premium

    CECO Peerless - Secondary Separators within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants)

    In a steam generator vessel or pressurized water reactor (PWR) plant, the reactor core heats water without boiling, and exchanges heat with a lower pressure water system, which will then turn to stream to power the turbine. The Peerless brand Secondary Separator within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants) or ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Peerless - Nuclear Power Separators Product line

  • Premium

    iCenta Multical - Model 602 - Energy Meter

    The Multical 602 is an all-purpose energy calculator for heating and cooling, designed to be used together with flow sensors. The Multical 602 operates with a range of communication modules (recommended – Ultraflow 54) and has a high power radio router module. Integral data loggers constantly monitor a number of key functions in the ...

    By iCenta Controls Ltd based in Salisbury, UNITED KINGDOM. from Flow Meters - Water Meters & Heat Meters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you