Heating Systems Equipment For Energy Management In Africa
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases by passing them through a gas tube heat exchanger. Cool ambient air is blown across the hot heat exchanger tubes, which provides heated clean air for factory space heating, pre-heated combustion air or process ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases, by passing them through a gas tube heat exchanger. Heat is exchanged with the external water jacket, generating hot water for district heating or for industrial ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The secondary chamber is where waste in the gaseous phase is treated. Combustion gases from the primary chamber are transferred into the secondary chamber for thermal treatment. Where necessary, the design and volume of the hamber will be established by the development of a computer Fluid Dynamic Model using Phoenics 2008 combustion and chemical reaction ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ensure optimum performance with a wide range of feedstocks ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by AFKO Ltd. Şti.based in TURKEY
Sland By Power: Supplying of emergency electrical power at variable ioad. in the event ol normal utility power taiiire. This rating is maximum power, no overload capability is available. Prime Power: Supplying ol electrical power at variable load (or an unlimited numbef of hours in Hie eveni ol normal ulilily power failure. 10% ovor load capability is ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a super-heater to produce a dry steam to drive a ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
Distributed by Cannon Bono Energia S.p.A. - part of the Cannon Groupbased in ITALY
Cannon Bono Energia offers diathermic oil heaters with horizontal multi-tubular design, with capacity up to 40 MW. They can use synthetic diathermic fluid in both liquid and gaseous phase with temperatures up to 400 ° ...
-
Manufactured by Integrated Flow Solutions, Inc. DXPbased in USA
Integrated Flow Solutions Heat Transfer/Hot Oil Systems are designed to store and transfer heat transfer fluids used for industrial heating. The heat transfer fluid is normally stored in an elevated insulated vessel skid mounted. Special high temperature centrifugal pumps are used to circulate the heat media fluid from the storage tank through an electric process heater, gas fired heater or ...
-
based in FRANCE
The TPC-B Thermal Fluid Heater is a vertical, multi-pass, fired heater with a long pedigree of both design and construction. The downward fired configuration ensures stress free and unrestricted expansion of the heater coils during normal operation. The heater has been designed to operate in a diverse range of industries and with a wide variety of heat transfer fluids. A variety of liquid or ...
-
Manufactured by Henan Doing Machinery Equipment Co., Ltd.based in CHINA
Whatsapp/Tel: 008613526692320 oilmachine@wastetireoil.com A fully continuous tire oil pyrolysis processing line is a system designed for the recycling of waste tires through a process called pyrolysis. In the case of tire pyrolysis, waste tires are heated to a high temperature in a reactor, resulting in the breakdown of the tire materials into various by-products, including fuel oil, carbon ...
-
Manufactured by Dab Pumpsbased in ITALY
Pump for hot water circulation in domestic central heating and air conditioning systems of the closed circuit pressurized type or open circuit ...
-
Manufactured by Grundfosbased in DENMARK
UPS is a three-speed circulator pump designed for heating and air-conditioning systems and is also used for central and district heating systems. The pump provides reliable and maintenance-free ...
-
Manufactured by Biogasclean A/Sbased in DENMARK
The popular choice. This type is for smaller and larger H2S loads. We manufacture fiberglass tanks in several countries to reduce transportation costs. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters, gas detector system and – if required – also heating system installed in a custom ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you