Heating Systems Equipment For Energy Management In Latin America
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ensure optimum performance with a wide range of feedstocks ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...
-
Manufactured by Grundfosbased in DENMARK
UPSD is a twin-head variant of the UPS three-speed pump designed for heating and air-conditioning systems. UPSD is installed where duty and standby operation is required to obtain extra ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Carbolite Gero offers continuous mesh belt furnaces with a maximum operating temperature of 1100 °C. Mesh belt furnaces are suitable for a wide range of heat treat applications including hardening, annealing, tempering and stress relieving. Furnaces can be designed for single or multi-zone operation and water cooled zones can also be offered. Each mesh belt furnace can be supplied with both ...
-
Manufactured by Körting Hannover AGbased in GERMANY
These registers belonging to the LG-ZG series have been specially developed for use at melting pots in the glass industry and at dryers in the ceramics industry. The basic concept consists of the outer register with air connection, the core tube (flow rectifier) and the lance clamping and adjusting equipment. This air register burner is distinguished by the following main characteristics: ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The robust construction of the SBCF large chamber furnace makes it ideal for applications such as the heat treatment of steels and alloys, ceramics sintering and aerospace heat treatment. The SBCF chamber furnace is an industrial scale furnace based on a modular design principle which can be adapted to various applications. The furnace chamber is cubic in shape and is available in three ...
-
Manufactured by Muntersbased in USA
By installing an IceDry® dehumidifier inside the cold store a frost free cold store can now be a reality. An airlock is no longer needed. When IceDry is installed, accumulated ice and frost will gradually evaporate until the store is completely free from ice and frost. IceDry is the only dehumidifier that has been developed especially for installation inside a cold store. The tough, cold ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The new Model Duraspark 1000 Heavy Duty Pilot was developed specifically for the rigors of the oil-patch, providing additional layers of protection and heat shielding of critical components. The transformer box has also been placed at grade (vs. near the flare tip) reducing heat stress of these critical components. Available with retractable packages, the DuraSpark 1000 will improve system ...
-
Manufactured by Biogasclean A/Sbased in DENMARK
Easy to ship worldwide; the gas cleaner can be shipped on a truck or in one 40 feet container. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters and – if required – also gas detector system and heating system installed in a small custom built fiberglass container. The scrubber tank is ...
-
Manufactured by Allegheny Technologies Incorporated (ATI)based in USA
ATI 409HP (UNS S40900) ferritic stainless steel was introduced by ATI in 1961 to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-I", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The robust construction of LCF industrial chamber furnaces makes them ideal for applications such as the heat treatment of steels and alloy, ceramics sintering and aerospace heat ...
-
Manufactured by ZENNER International GmbH & Co. KGbased in GERMANY
The zelsius C5 ISF with Single-Jet Flow Sensor is the combination of economic and technical advantages. Thanks to a combination of an economic concept and a very compact design, the heat meter/ cooling meter zelsius® C5 ISF is outstandingly suitable for recording all accounting data for measuring energy consumption in heating and/or cooling ...
-
Manufactured by D`Alessandro Termomeccanicabased in ITALY
Smoke circuits boiler type “Marine” with water production for heating; Boiler shell in steel; Doors for internal inspections and boiler cleaning; Cast iron burner with mechanical feeding system; Hopper for the combustible material; Variable speed screew for automatic feeding; Primary and secondary combustion air system; Rotary valve (to prevent smokes return into the hopper); Voltage: ...
-
Manufactured by Albemarle Corporationbased in USA
Lithium carbonate, the first chemical in the production chain, is the building block for other lithium derivatives and used in a great variety of applications, like frits for the ceramic and enamel industries, heat resistant glass, aluminum production, pharmaceuticals, and lithium-ion batteries. Albemarle produces lithium carbonate at La Negra, Antofagasta in Chile, and in Nevada, USA, based on ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The CAF G5 is a furnace designed to test ash fusibility, and optionally, the increasingly popular determination of biomass or solid recovered fuels testing. The coal ash fusibility test furnace conforms to the Standards ISO 540:2008; ASTM D 1857 / D1857M – 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:2006 (biomass) and PD CEN/TR 15404:2010 (solid recovered fuels (SRF)). The CAF ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you