Heating Systems Equipment For Energy Management In USA
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a super-heater to produce a dry steam to drive a ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases, by passing them through a gas tube heat exchanger. Heat is exchanged with the external water jacket, generating hot water for district heating or for industrial ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS MR Series is a complete stainless steel shell and tube heat exchanger designed for hygienic applications. The product flows through both the inner tube and the surrounding shell for regeneration duties. The removable tubes allow hygienic processing on the shell side. The MR Series is an ideal heat exchanger for direct product-to-product heat recovery. Using HRS corrugation technology, ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 3419MX pump is designed with Cornell's renowned quality and durability. It features a 3" discharge, 4" suction, and enclosed impeller. Cornell's patented CycloseaP design is standard, with a Type 2 single mechanical seal with Buna-N elastomers, stainless steel hardware and tungsten carbide vs. silicon carbide seal faces for abrasion ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS DTA Series is a complete stainless steel double tube heat exchanger designed for hygienic applications. The product flows through the inner tubes and the service fluid flows through the surrounding shell. Because of its geometry, the DTA Series is a true counter current heat exchanger. Using our corrugation technology, both heat transfer and efficiency are increased over standard smooth ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
Manufactured by TESMEC S.p.Abased in ITALY
The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated ...
-
Manufactured by TESMEC S.p.Abased in ITALY
The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases by passing them through a gas tube heat exchanger. Cool ambient air is blown across the hot heat exchanger tubes, which provides heated clean air for factory space heating, pre-heated combustion air or process ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
Based on the DTI Series, but with an adapted design for direct energy recovery (product vs product) for sludge with low viscosity. The inner tube is removable making it possible to inspect/clean both tube and shell side. It also allows for easier and faster cleaning consequently reducing operational downtime required for these high fouling products. The tube in tube concentric geometry makes it ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The secondary chamber is where waste in the gaseous phase is treated. Combustion gases from the primary chamber are transferred into the secondary chamber for thermal treatment. Where necessary, the design and volume of the hamber will be established by the development of a computer Fluid Dynamic Model using Phoenics 2008 combustion and chemical reaction ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS R Series is a scraped surface heat exchanger designed for the most difficult heat transfer applications, for example where very high viscosities and highly fouling fluids need heat treatment. Unlike the HRS Unicus Series, where the scraper movement is reciprocal, the HRS R Series technology uses a rotary scraper rod. This scraper rod can reach velocities up to 300 rpm resulting in ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS C Series is a complete stainless steel shell and tube heat exchanger designed for industrial use, based on our K Series but with smaller tubes making the unit more compact. The product flows through the inner tubes and the service fluid flows through the surrounding shell. The HRS C Series is an ideal heat exchanger for steam-to-water applications such as CIP heating and low viscosity ...
-
PremiumManufactured by AFKO Ltd. Şti.based in TURKEY
Sland By Power: Supplying of emergency electrical power at variable ioad. in the event ol normal utility power taiiire. This rating is maximum power, no overload capability is available. Prime Power: Supplying ol electrical power at variable load (or an unlimited numbef of hours in Hie eveni ol normal ulilily power failure. 10% ovor load capability is ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS DTI Series is a complete stainless steel double tube heat exchanger designed for industrial applications. Because of its geometry the DTI Series is a true counter current heat exchanger; the product flows through the inner tube and the service fluid flows through the surrounding shell. Using our corrugation technology, both heat transfer and efficiency are increased over standard smooth ...
-
Manufactured by Stelter & Brinck, Ltdbased in USA
&B'sindirect fired air heatersare used to dry chemically sensitive products such as foods, grains, malt, dairy, chemicals, pharmaceuticals, ect. Our indirect air heaters are used with spray dryers, fluid bed dryers, rotary dryers, kilns, chemical dryers, flash dryers, kiln furnaces, ovens, and for many other industrial heating and drying applications. These high temperature process heaters ...
-
Manufactured by Tmeic Corporationbased in USA
SOLAR WARE 3200 is one of the largest central PV inverter in the 1500V power class. The first heat-pipe based hybrid cooling technology implemented in utility-scale PV inverter solution providing optimal opex ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you