Heating Systems Equipment For Energy Management
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases by passing them through a gas tube heat exchanger. Cool ambient air is blown across the hot heat exchanger tubes, which provides heated clean air for factory space heating, pre-heated combustion air or process ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
Based on the DTI Series, but with an adapted design for direct energy recovery (product vs product) for sludge with low viscosity. The inner tube is removable making it possible to inspect/clean both tube and shell side. It also allows for easier and faster cleaning consequently reducing operational downtime required for these high fouling products. The tube in tube concentric geometry makes it ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
- Project-specific control system for optimum control of steam or hot water boilers - Maximum supply and operating reliability thanks to integrated monitoring and protection functions - Condition monitoring for consistently high system efficiency and availability of steam, hot water and heating boiler systems - Intuitive operation with graphical symbols and state-of-the-art touchscreen displays - ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by AFKO Ltd. Åžti.based in TURKEY
Sland By Power: Supplying of emergency electrical power at variable ioad. in the event ol normal utility power taiiire. This rating is maximum power, no overload capability is available. Prime Power: Supplying ol electrical power at variable load (or an unlimited numbef of hours in Hie eveni ol normal ulilily power failure. 10% ovor load capability is ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a super-heater to produce a dry steam to drive a ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhaust gases, by passing them through a gas tube heat exchanger. Heat is exchanged with the external water jacket, generating hot water for district heating or for industrial ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The ELSB (Electric Steam Boiler) is a highly efficient, electrically heated steam generator for 350 to 7,500 kg/h steam at up to 24 bar. When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions. High steam quality, excellent dynamics, ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS MR Series is a complete stainless steel shell and tube heat exchanger designed for hygienic applications. The product flows through both the inner tube and the surrounding shell for regeneration duties. The removable tubes allow hygienic processing on the shell side. The MR Series is an ideal heat exchanger for direct product-to-product heat recovery. Using HRS corrugation technology, ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS C Series is a complete stainless steel shell and tube heat exchanger designed for industrial use, based on our K Series but with smaller tubes making the unit more compact. The product flows through the inner tubes and the service fluid flows through the surrounding shell. The HRS C Series is an ideal heat exchanger for steam-to-water applications such as CIP heating and low viscosity ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ensure optimum performance with a wide range of feedstocks ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The conventional fired boiler generates thermal heat or process heat while simultaneously utilising the heat potential from waste heat sources. Conventional fired heat generator with additionally integrated smoke tube pass for waste heat utilization. Environmentally friendly generation of thermal heat or process heat through the utilisation of waste heat sources. High supply reliability thanks to ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The secondary chamber is where waste in the gaseous phase is treated. Combustion gases from the primary chamber are transferred into the secondary chamber for thermal treatment. Where necessary, the design and volume of the hamber will be established by the development of a computer Fluid Dynamic Model using Phoenics 2008 combustion and chemical reaction ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The UT-L is a particularly reliable and efficient heat generator with output from 650 to 25,000 kW at up to 16 bar. The design complies with the Gas Appliances Regulation. The heating boiler offers high performance and is extremely compact. ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
With the Control 8000, you can operate different heating systems in properties and large buildings efficiently and simply, even via the internet. This technology's modular structure enables equipment to be set up individually for each project. Customer-specific control thanks to flexible, extendable functional modules. Intuitive operation via colour touch screen. Simple connection to building ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
Large solar thermal plants in modular construction can be used individually and cover the specific heat requirement completely or partially with economy-friendly solar energy. Complete systems for hot water and heating support. Pre-assembled system solutions for domestic properties, sports centers, fitness studios, hotels and spa facilities. Ready-to-connect modules measuring 35 sq. m to 220 sq. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you