Industrial Ovens Equipment For Energy Management In Connecticut
-
based in USA
The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable operation and minimal maintenance at a competitively low installed cost. The 9E gas ...
-
Manufactured by Fuel Tech, Inc.based in USA
Combustion air is diverted from the burners to create a fuel rich zone in the lower furnace. Fuel bound nitrogen conversion to NO is inhibited on coal and oil fired boilers. Peak flame temperatures are reduced on gas fired boilers to limit thermal NOx formation. A high momentum air stream intersects burner flames in the upper furnace to complete combustion prior to the boiler convective ...
-
Manufactured by Nel ASAbased in NORWAY
The world’s most energy efficient electrolysers, the A Series features a cell stack power consumption as low as 3.8 kWh/Nm3 of hydrogen gas produced, up to 2.2 MW per stack. A Series electrolysers can produce up to 3,880 Nm3/h of hydrogen or just over 8 ton per day. Our modular concept enables us to deliver customized indoor hydrogen solutions for any application, configuration and size ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Min-Emissions Enhanced Jet burner is an Ultra-Low emissions flat flame burner.The picture (right) is of Zeeco’s GLSF flat flame burners in operation in an ethylene cracking furnace. The design allows for flat flame burners to achieve a great heat flux profile without flame rollover. A major advantage is that the heat flux profile can be changed as required for the specific ...
-
Manufactured by EES - Environmental Energy Servicesbased in USA
CoalTreat® is EES’ fuel chemistry innovation that has proven to be highly effective in mitigating problems attributed to furnace slagging and heat transfer surface fouling in coal-fired utility and industrial boilers. CoalTreat® is applied to the fuel pre-combustion, customized to each plant’s fuels and specific objectives, and has been successfully deployed on several large ...
-
Manufactured by Zeeco, Inc.based in USA
The ZEECO® GLSF Enhanced Jet burner is an ultra-low emissions flat flame burner. The above pictures display GLSF flat flame burners in operation in an ethylene cracking furnace. The design allows for flat flame burners to achieve a superior heat flux profile without flame rollover. A major advantage is that the heat flux profile can be changed as required for the specific application with ...
-
Manufactured by Singulus Technologies AGbased in GERMANY
Selenisation furnace for an optimized CIGS absorber formation.The CISARIS selenisation furnace is an inline rapid thermal processing equipment, designed for the CIGS absorber formation on large area glass substrates. CISARIS consists of a handling station, a vacuum tight process section, and a return conveyor and is optimized for the mass production of CIS solar ...
-
Manufactured by Toyo Tansobased in USA
Toyo Tanso manufacturers highly advanced carbon composite and graphite materials for heat treating applications. The high strength and low mass of our carbon composite materials offers optimal thermal conservation opportunities and potentially greater furnace throughput. Toyo Tanso can provide carbon composite sheets and cylindrical heat shields. We also provide "C" and "L" channels for ...
-
Manufactured by ETTER Engineering Company, Inc.based in USA
The ETTER Engineering ControlWorx SBCP 1000 is a single burner control panel that provides basic flame supervision to a single gas-fired, pilot ignited burner. The High Temperature Limit instrument monitors furnace temperature and will shut down the burner if the measured temperature exceeds the instrument’s set-point, as well as setting of an alarm buzzer to annunciate a flame failure. ...
-
Manufactured by Nel ASAbased in NORWAY
The M Series provides fast response times and production flexibility making it ideal for hydrogen generation utilizing renewable power sources. With minimal maintenance and siting requirements, M Series electrolysers can produce up to 4,920 Nm3/h of hydrogen gas at 99.9995% purity on-demand. Featuring a scalable modular design that can be containerized, these systems offer solutions that are ...
-
Manufactured by TITAN-Catalyticbased in USA
TITAN offers refurbishment services, including the replacement of platinum catalytic pads and preheat elements for TITAN heaters and other manufacturers including: Vulcan Systems, Vulcan Catalytic, Heraeus, PED, IPE / Industrial Process, Equipment, Monark Equipment, Solar Products, Wisconsin Oven, Trimac Systems and Bruest Catalytic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you