Only show results available in Michigan? Ok

Microturbines equipment for Energy Management

  • MODEL 106 LIQUID MICROTURBINE FLO-SENSOR

    McMillan Model 106 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results ...

    By McMillan Company based in Georgetown, TEXAS (USA).

  • MODEL 106F LIQUID MICROTURBINE FLO-SENSOR

    McMillan Model 106F FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 50.0 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision ...

    By McMillan Company based in Georgetown, TEXAS (USA).

  • Model C1000S - Microturbine Power Generation Systems

    Can be paralleled up to 30MW of power

    By Capstone Turbine Corporation. based in Chatsworth, CALIFORNIA (USA).

  • Ashwell Biomass - Combined Heat and Power (CHP) System

    Produce Electricity & Generate Heat with a Biomass Boiler CHP solution. Ashwell Biomass along with leading Organic Rankine Cycle (ORC) specialists Enogia to offer low maintenance, cost effective and proven biomass Combined Heat and Power (CHP) solutions. Already got a biomass boiler but want to explore CHP? A key benefit of the Ashwell/Enogia ...

    By Ashwell Biomass Ltd based in Thurmaston, UNITED KINGDOM.

  • Bioenergy Systems

    Bioenergy is a renewable energy resource derived from living organisms and/or their byproducts. It currently accounts for approximately 6% of Canada’s total energy supply. Bioenergy is an extensive sustainable energy resource that can supply energy to Canada while emitting low CO2 and reducing waste. Scientists and engineers at CanmetENERGY ...

    By Canmet ENERGY - Natural Resources Canada based in Ottawa, ONTARIO (CANADA).

  • MODEL S-114 LIQUID MICROTURBINE FLO-METER

    McMillan S-Series FLO-METERS are capable of measuring extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results ...

    By McMillan Company based in Georgetown, TEXAS (USA).

  • Model VTA - Micro Turbine

    VTA has re­vo­lu­tio­ni­zed the co-ge­ne­ra­ti­on of heat and power in se­wa­ge plants by in­tro­du­cing the Mi­cro­Tur­bi­ne. This in­no­va­ti­ve unit from the ma­nu­fac­tu­rer Caps­to­ne opens up whol­ly new ...

    By VTA Austria GmbH based in Rottenbach, AUSTRIA. from Plant Engineering Product line

  • Model VG INV S, VSD silenced version / Indoor - Direct Drive, Variable Speed, In Soundproof Cabin

    This extraordinary range designed for the compression of METHANE GAS is particularly indicated for all the applications which require pressures in use from (3-15 Bar) with flow rates up to 2500 Nm3/h. Adicomp has developed a series of compressors ideal for any kind of application depending on the models and needs. Typical is the application ...

    By Adicomp s.r.l. based in Isola Vicentina (VI), ITALY. from Gas Compressors for Dry Methane/Indoor Product line

  • Dry Methan Compressor

    A range of compressors suitable for compressing METHANE GAS.developed and specially built for 'OUTDOOR' installations with ambient temperatures from -22 °F to +113 °F; it is particularly indicated for all the applications which require pressures in use from (45 - 220 psi) with flow rates up to 1500 CFM. ...

    By K&S Equipment and Machinery Corporation based in Houston, TEXAS (USA). from Custom Gas Compressor Product line

  • Model VG - Standard Version of Methane Gas Compression

    This extraordinary range designed for the compression of METHANE GAS is particularly indicated for all the applications which require pressures in use from (3-15 Bar) with flow rates up to 2500 Nm3/h. Adicomp has developed a series of compressors ideal for any kind of application depending on the models and needs. Typical is the application ...

    By Adicomp s.r.l. based in Isola Vicentina (VI), ITALY. from Gas Compressors for Dry Methane/Indoor Product line

  • Model VG DC - Standard Direct Current Version / Indoor

    This extraordinary range designed for the compression of METHANE GAS is particularly indicated for all the applications which require pressures in use from (3-15 Bar) with flow rates up to 2500 Nm3/h. Adicomp has developed a series of compressors ideal for any kind of application depending on the models and needs. Typical is the application ...

    By Adicomp s.r.l. based in Isola Vicentina (VI), ITALY. from Gas Compressors for Dry Methane/Indoor Product line

  • MicroTurbine - The Capstone System

    It's about the size of a refrigerator and generates 30 kilowatts of electricity - enough to power a small business. The Capstone MicroTurbine is based on the same technology as a jet engine - but integrates patented air bearing and proprietary software with state-of-the-art electronics. The result: a versatile, reliable, environmentally beneficial ...

    By Allied Environmental Technologies, Inc. based in Seal Beach, CALIFORNIA (USA).

  • Land Based Gas Turbines and Microturbines

    ATI is a world leader in development and production of heat and corrosion resistant alloys for land based gas turbines. Listed below are some of the common alloys we supply for turbine applications. Product forms include, plate, sheet, strip, forgings, bar, wire, tubing, billet, castings, and fabrications.

    By Allegheny Technologies Incorporated (ATI) based in Pittsburgh, PENNSYLVANIA (USA). from Natural Gas Power Generation Product line

  • Model C200 - Microturbine Power Generation Systems

    Can be paralleled up to 30MW of power

    By Capstone Turbine Corporation. based in Chatsworth, CALIFORNIA (USA).

  • McMillan - Model 102 - Liquid Microturbine Flo-Sensor

    McMillan Model 102 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better!  A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing ...

    By McMillan Company based in Georgetown, TEXAS (USA). from Products For NON-UHP Liquid Applications Product line

  • McMillan - Model 104 - Liquid Microturbine Flo-Sensor

    McMillan Model 104 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision ...

    By McMillan Company based in Georgetown, TEXAS (USA). from Products For NON-UHP Liquid Applications Product line

  • MODEL 400 LIQUID MICROTURBINE

    The Model 400 Liquid FLO-CONTROLLER provides low cost liquid flow control. Operating with liquids in the same way MFCs work with gases, an integrated flow sensor and proportional control valve provide a complete package. The heart of the FLO-CONTROLLER is the flow sensor, which provides flow rate feedback for accurate control. A Model 101 ...

    By McMillan Company based in Georgetown, TEXAS (USA).

  • Anakata - Groundbreaking Microturbines

    Developed by Formula One aerodynamics and materials engineers, Anakata’s patented ‘Accelerator Technology’ and ‘microdownstream’ uses leading-edge technology to create a turbine that is more efficient than any other of its size.

    By Anakata Wind Power Resources Ltd based in Carencero, LOUISIANA (USA).

  • McMillan - Model 100 - Gas Microturbine Flo-Sensor

    McMillan Model 100 microturbine gas FLO-SENSORS are capable of measuring virtually any clean gas or gas mixture as low as 20-100 mL/minute or as high as 100-500 Lpm! Repeatable results are achieved using a patented microturbine design. This proven design accurately measures flow rates with no zero drift and no maintenance required.

    By McMillan Company based in Georgetown, TEXAS (USA). from Products for Gas Applications Product line

  • MODEL 106S LIQUID MICROTURBINE FLO-SENSOR

    McMillan Model 106S FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 50 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision ...

    By McMillan Company based in Georgetown, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you