Microturbines Equipment For Energy Management Available In USA
-
Manufactured by ESPE Groupbased in ITALY
The ES3 Micro Wind turbine is the smallest turbine in the ESPE Wind range and is ideally suited for remote access sites, small domestic properties, telecoms and off-grid applications. Offering an unrivalled 25+ year track record, the KW3 is amongst the most sought after small wind turbine in the ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 106 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a ...
-
Manufactured by McMillan Companybased in USA
McMillan S-Series FLO-METERS are capable of measuring extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well-deserved ...
-
Manufactured by ESPE Groupbased in ITALY
ESPE is the most popular turbine in our range, regarded by many as the turbine of choice. Ideally suited for rural domestic, farmers, land owners and light industrial applications. It is fully certified under the Microgeneration Certification Scheme (MCS), and is therefore eligible for Feed-in Tariffs and Regional ...
-
Manufactured by Technopa GmbHbased in AUSTRIA
Steam to energy transformer. Micro steam turbine & generator module. Wet steam turbine operation. Plug and produce ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 104 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a ...
-
Manufactured by DLLD Power Limitedbased in CHINA
XJ14-0.3DCT4 is an AC direct system consisting of a turbine-generator unit producing AC power which is used as needed. That is, it is fed directly to the appliances. No need for a battery and inverter, XJ14-0.3DCT4 offers a complete water-to-wire system with an integral Turgo turbine, generator, and valve flow control. Designed to deliver ready-to-use 115V/230V AC power, it employs a brushless, ...
-
Manufactured by BOSALbased in BELGIUM
BOSAL Energy has 20 years of experience in development, testing and production of highly effective heat exchangers. BOSAL Energy is part of the BOSAL group which was founded in 1923 in the ...
-
Manufactured by Cryo Purbased in FRANCE
Adapted to the recovery of associated gas at small-scale oil wells, the Cryo Flare solution enables to eliminate flare gas and to create extra revenues by producing LNG (and LPG) which can be easily transported and sold to remote markets. It is an environment-friendly alternative to routine flaring of small gas ...
-
based in USA
CPC's BioMax Gasification Systems convert carbon-rich, biomass feedstocks into a clean producer gas (syngas) containing equal amounts of hydrogen and carbon monoxide, a small amount of methane, some carbon dioxide, water vapor and the balance nitrogen. CPC's proprietary gasification technology enables the producer gas stream from theBioMax to haveextremely low level of tar, such that the systems ...
-
Manufactured by Technopa GmbHbased in AUSTRIA
Power Capacity: 10kW-600kW at. Incoming steam temperature: min 130°C. Incoming steam pressure min: 4,0 bar Abs. Outcoming steam temperature: min 105 °C. Outcoming steam pressure: min 1,1 bar Abs. Steam flow: min 1,1-3 ...
-
Manufactured by K & S Equipment and Machinery Corporationbased in USA
A range of compressors suitable for compressing METHANE GAS.developed and specially built for "OUTDOOR" installations with ambient temperatures from -22 °F to +113 °F; it is particularly indicated for all the applications which require pressures in use from (45 - 220 psi) with flow rates up to 1500 CFM. We developed a series of compressors ideal for any kind of application depending on ...
-
Manufactured by Marlec Engineering Company Ltd.based in UNITED KINGDOM
Experience the powerful but quiet operation of the new Tri-namic profile blade. Our latest turbine, the Rutland 1200, is the ideal companion for generating energy on board, read on to find out why it is the most technologically advanced micro wind turbine and controller in its ...
-
Manufactured by Technopa GmbHbased in AUSTRIA
Steam to energy transformer. Micro steam turbine & generator module. Plug and produce ...
-
Manufactured by Adicomp S.r.l.based in ITALY
This extraordinary range designed for the compression of METHANE GAS is particularly indicated for all the applications which require pressures in use from (3-15 Bar) with flow rates up to 2500 Nm3/h. Adicomp has developed a series of compressors ideal for any kind of application depending on the models and needs. Typical is the application combined by methane-fuelled Microturbines for ...
-
Manufactured by Enviro Power, LLCbased in USA
The SmartWatt Boiler is a drop-in replacement solution that more than pays for itself over time by lowering a building’s energy costs. Helping building owners reduce their carbon emissions, the boiler is much more efficient and uses less natural gas than the traditional boilers they replace. ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
It is widely used in hydro power stations with the head of 3--50 meters. Francis turbine is one of the most widely used turbines. It has a compact structure, reliable operation and high efficiency, and can be used at different ranges of water flow. Large-sized Francis turbines are commonly used at hydraulic head range of 20-700m. ...
-
Manufactured by Ensto Groupbased in FINLAND
The operating data exchange system (D.E.I.E.) is a control/monitoring unit that manages the remote control and monitoring of decentralised generating installations. Control cabinet for local spot generation, with measurements capacity for Wind mills, Photovoltaic generation, Micro generation, Gas turbine, Hydraulic ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
Manufactured by Mailhem Environment Pvt. Ltd.based in INDIA
Biogas is produced during the anaerobic degradation of organic material and this biogas can be used to generate heat. The generated heat can be used for various applications like boilers, gas engines, micro turbines, fuel cells, and more. We can assist you with a biogas plant to generate heat for your industrial or commercial ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you