Natural Gas Applications
-
Premium
Electronic fuel control valves solutions for oil and gas industry
Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Steel Scaffolding Plank for Natural Gas Transmission
The weight for each bundle should not exceed 50 kg. Consent of the clients can increase the bundle weight to 80 kg. When bundling the plain end steel pipe, the pipe end should be aligned. The aligned pipe ends deviation should be less than ...
By Hunan Prime Steel Pipe Co., Ltd based in Changsha, CHINA.
-
Spiral Welded Pipe for Natural Gas Transmission
The weight for each bundle should not exceed 50 kg. Consent of the clients can increase the bundle weight to 80 kg. When bundling the plain end steel pipe, the pipe end should be aligned. The aligned pipe ends deviation should be less than ...
By Hunan Prime Steel Pipe Co., Ltd based in Changsha, CHINA.
-
Oil & gas solutions for the gas pipeline transportation areas
Compressor stations are located at intervals of every 40-70 miles along a gas pipeline to compress the gas to a specified pressure, thereby allowing it to continue traveling along the pipeline to its destination. Compressor stations require filter separators that remove liquids, dirt, particles, and other impurities from the natural gas, and CECO offers considerable expertise at separation for gas pipeline compressor ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Oilfield Power Systems for Oil & Gas Industry
Flared gases and NGLs can be re-purposed as fuel for flex-fuel, low-emissions LPP Combustion Power Systems, lowering production costs, reducing logistical burdens, and addressing Gas Capture Plan and other compliance issues with flaring and emissions. The Lean, Pre-mixed, Pre-vaporized (LPP) equipment enables clean combustion of liquid fuels in gas turbines and industrial boilers and burners. In addition to flare-gas NGLs, the LPP Combustion Oilfield Power System also operates on a variety of traditional liquid ...
By LPP Combustion, LLC based in Columbia, MARYLAND (USA).
-
Industrial compressors solutions for natural gas industry
Compressors for the transportation and pumping of natural gas, and for the feeding of gas engines and turbines. ABC has more than 200 natural gas compressors in cogeneration plants. Its long experience, together with its close collaboration with the world’s leading manufacturers, allows the units to be adapted to the changing conditions of natural gas supply for more efficient work. Since the 1980s ABC has satisfied customers from the most diverse sectors: energy, petrochemical, ceramics, food, paper, ...
By Abc Compressors based in Eibar, SPAIN.
-
Variable Phase Turbine for Oil and Gas
In the oil and gas field there is a significant opportunity to recover a substantial amount of energy and increase plant production by utilizing Energent's two-phase turbine technology. A highlight of these opportunities lies within the liquid natural gas (LNG) extraction process. By replacing liquid J-T valves with the Variable Phase Turbine, power can be recovered, and more importantly, the liquid fraction can be increased improving the plant output by up to ...
By Energent Corporation based in Santa Ana, CALIFORNIA (USA).
-
Organic Rankine Cycle (ORC) Systems for Oil & Gas
Turboden Organic Rankine Cycle (ORC) units enable power production (up to 20 MW per single turbine) by recovering excess waste heat from the exhausts of gas turbines or reciprocating engines, or from the hot streams typical in Oil & Gas industry. ORC turbogenerators provide a solution to improving the efficiency of typical Oil & Gas processes, by allowing users to reduce their environmental footprint through converting waste, high-to-low grade heat, into mechanical/electric ...
By Turboden S.p.A based in Brescia, ITALY.
-
Heat Recovery System for OIL & GAS Industry
Oil & Gas is a multi-trillion dollar industry that continues to fuel our world’s economic engine. Getting this resource from the ground to its final destination is a complex process with many steps along the way. Heat recovery can improve process efficiencies and get more product to ...
By Echogen Power Systems based in Akron, OHIO (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you