Natural Gas Equipment For Energy Management In Massachusetts
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...
-
Manufactured by Dalkia Aegis, EDF Groupbased in USA
A powerful enhancement of the PowerSync line, both the PowerVerter PV-75 and PV-100 reflect continual innovation to meet consumer needs. These unique, standalone products represent a redefinition of the CHP experience, marrying the trademark savings and emissions reductions with black start capability. The PowerVerter systems offer the most dynamic cogeneration experience on the market, reducing ...
-
Manufactured by Thermal Engineering International (USA) Inc. (TEi)based in USA
TEi has incorporated the knowledge and experience from recent acquisitions of EFCO, which included previous Westinghouse and Marley feedwater heater products, to provide our customers with a wide array of quality process heat exchangers. We supply high and low pressure feedwater heaters, oil coolers, component coolers and service water coolers to the petrochemical, petroleum refining, process ...
-
Manufactured by Tecogen, Inc.based in USA
Our TECOCHILL “STx Series” and “DTx Series” product lines offer water-cooled engine-driven chillers, ranging from 150 to 400 tons of cooling capacity. Each natural gas engine drives a variable-speed single-screw rotary compressor, connected to a standard vapor compression refrigeration system utilizing environmentally-friendly HFC-134a refrigerant. TECOCHILL’s ...
-
Manufactured by Ambri Incorporatedbased in USA
Ambri’s product is a ready-to-install DC containerized system, complete with shelves of cells, thermal management, weatherproof outer enclosure, and a battery management system (BMS), for applications that require high energy capacity, frequent cycling, long life and high efficiency. Cells are assembled onto trays and connected within a thermal enclosure to form a MWh-scale system, which is ...
-
Manufactured by Tecogen, Inc.based in USA
Our TECOCHILL® “Hybrid Drive Air-Cooled” product line offers air-cooled packaged chillers with 100 tons of cooling capacity. The hybrid drive chiller can operate on both a natural gas engine and electricity providing customers with up to 50% lower operating costs compared to competing alternatives and dual power source resiliency. Customers may also qualify for the 40% Investment ...
-
Manufactured by Muntersbased in USA
VariMax IFRG combines Des Champs Products heat-exchanger design with indirect heating technologies to deliver contaminant-free process air with very high efficiency. Recirculation of the combustion gases allows the heater to attain an efficiency of 90%, 1,000°F (555°C) temperature rise, 1,200°F (649°C) discharge temperature, and a 40:1 ...
-
Manufactured by Dalkia Aegis, EDF Groupbased in USA
Gas Heat Pump (GHP) systems are air conditioning units that are more efficient than traditional electric systems, making them natural, complementary products when paired with CHP systems. Yanmar natural gas-powered (VRF) heat pump systems combine maximum efficiency with superior reliability, reducing operating costs by up to 70%. Utilizing reversible air-source technology, Yanmar GHP ...
-
Manufactured by Ariston Thermo USA LLC Parent Company of HTPbased in USA
The UFT Boiler is a medium mass high efficiency boiler. This advanced modulating gas condensing boiler has a 316L stainless steel fire tube heat exchanger with a 96% AFUE rating. It also has ultra-low NOx emissions, making the UFT eco-friendly and your best option in today's green market. It is available in both a wall mounted version and a floor standing ...
-
Manufactured by Tecogen, Inc.based in USA
The InVerde e+ module is the first and only clean natural gas engine-driven cogeneration system able to operate within the extremely low levels of regulated pollutants allowed by the distributed generation regulations for 2007 set by the California Air Resources Board (CARB). The InVerde e+ emissions not only meet but exceed the stringent CARB 2007 regulations by utilizing our technology ...
-
Manufactured by Dalkia Aegis, EDF Groupbased in USA
The pioneering induction-based ThermoPower TP-75 CHP system infuses high efficiency with significant cost savings. Its industry best-in-class design allows the TP-75 to offer the most dynamic cogeneration experience on the market, reducing utility costs by up to 50%. With its simple interconnection process, the ThermoPower TP-75 cogeneration systems seamlessly integrates into existing ...
-
Manufactured by Ariston Thermo USA LLC Parent Company of HTPbased in USA
The Elite Premier is a low mass boiler with a 316L stainless steel heat exchanger. This versatile unit has an impressive range, with seven models reaching up to 399,000 BTUs. This floor standing or wall mount system is good for both residential and commercial applications. It is 96% efficient with a 10 to 1 turndown ratio. It vents in inexpensive, easy-to-install PVC pipe, up to 200 combined ...
-
Manufactured by Dalkia Aegis, EDF Groupbased in USA
CHP+ brings together two energy leaders, Dalkia Aegis, EDF Group and Mestek, combining their unparalleled expertise and technologies for a synergistic energy solution suitable for buildings of most any size and projects of varying scope. Customizable and scalable, the CHP+ system brings together a CHP system and a Futera boiler system featuring HeatNet 3.0 control software for a ...
-
Manufactured by Dalkia Aegis, EDF Groupbased in USA
As one of the innovative Combined Heat and Power (CHP) systems in the Dalkia Aegis product line, the PowerSync PS-75 exceeds conventional power plant performance. The PowerSync PS-75 offers the most dynamic cogeneration experience on the market, reducing utility costs by up to 50%, and offering standby ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco coalescing systems are the ideal way to remove moisture contamination in any liquid fuel. Hilco has been manufacturing coalescers for liquid fuels for over twenty five years. Systems are available with flow capacities as high as 1500 GPM (5700 ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you