Only show results in Michigan? Ok

Nuclear Energy equipment for Energy Management

  • Showcase

    AERZEN Delta - Model GM 3S ... 50L - Biogas Packaged Unit - Positive Displacement Blowers

    Premium technologies for the biogas sector - made by AERZEN. Whether boosting the intake pressure of combined heat and power (CHP) engines and treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids; AERZEN has the suitable blower or compressor for each ...

  • Premium

    Fingo - Model DE SOx - Desulphurization Plants

    Design, production and installation of desulphurization plants using dry and wet technology.

    By Fingo based in Moscow, RUSSIA.

  • Premium

    HILCO - Liquid Coalescing Cartridges

    Hilco coalescing systems are the ideal way to remove moisture contamination in any liquid fuel. Hilco has been manufacturing coalescers for liquid fuels for over twenty five years. Systems are available with flow capacities as high as 1500 GPM (5700 LPM).

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from HILCO Filter Cartridges Product line

  • Premium

    AERZEN - Model Series VMX - Oil-Injected Screw Compressor for Bio- and Processgas

    AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development ...

  • Premium

    Model Series C - Biogas Screw Compressors

    Oil-free screw compressor for biogas and biomethane. AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer ...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Biogas Screw Compressor Product line

  • Premium

    Model Series VMX - Biogas Screw Compressors

    Oil-injected screw compressor for bio- and processgas. AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer ...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Biogas Screw Compressor Product line

  • Premium

    Model Series VMY - Biogas Screw Compressors

    Oil-injected screw compressor for bio- and processgas. AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer ...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Biogas Screw Compressor Product line

  • Model 8130 NS - Indoor Residential Wood Furnace

    The Royall 8130 NS indoor residential wood furnace is a premium furnace for residential applications. Our premium residential indoor furnace can heat your home to any temperature for a fraction of what you are paying now. Our wood furnaces connect easily to any existing conventional air system giving you years of low cost, trouble free service. ...

    By Royall Products based in Reedsburg, WISCONSIN (USA). from Traditional Series - Indoor Wood Furnace Product line

  • Model 6130 NS - Indoor Wood Boiler

    The Royall 6130 NS indoor residential wood boiler is a premium boiler for residential applications.  Our premium residential indoor boiler can heat your home to any temperature for a fraction of what you are paying now. Our wood boilers connect easily to any existing conventional air system giving you years of low cost, trouble free service. ...

    By Royall Products based in Reedsburg, WISCONSIN (USA). from Traditional Series - Indoor Wood Boiler Product line

  • TCI - Spiral Wound Gaskets

    Spiral wound gasket is 'V' stainless steel band with a different sandwich filling material requirements made by the winding, depending on working conditions, pressure conditions, the structure can take to strengthen the inner, outer, gaskets to increase membership installation, use of compressive strength and rigidity, the formation can be divided ...

    By Ningbo T.C.I Co., Ltd. based in Ningbo City, CHINA. from Gaskets - Spiral Wound Gaskets Product line

  • Eddy - Model MIZ-85iD - Current Instrument

    The MIZ-85iD leverages the architecture of our industry-leading MIZ-80iD eddy current instrument into a modular, instrument-only system. It’s a small, rugged and lightweight unit that can be utilized in a variety of inspection environments. All configurations of the MIZ-85iD are completely sealed to provide protection from environmental and ...

    By Zetec, Inc based in Snoqualmie, WASHINGTON (USA). from Eddy Current Product line

  • Hopper Conveyors

    With a usable width of up to 3.10 m, an even higher filling volume can be achieved because of the short construction length. The bin floor is designed as a chain conveyor. Continuous removal of the materials is possible through adjustable belt speeds. Various materials can be removed continuously by specifically matched removal aids. (recovered ...

  • TracStar - Fusion Machines

    The TracStar fusion machines are the number one choice on jobsites fusing pipelines with their ease of maneuverability and freedom of movement. Self-propelled via rubber crawler tracks, these vehicles can traverse rough terrain and grades up to 30%. All of the TracStars are self-contained with all of the necessary electrical equipment on board. ...

    By McElroy Manufacturing based in Tulsa, OKLAHOMA (USA). from Mechanical / HVAC / Plumbing Product line

  • Electricity Peaking Stations

    Electricity peaking stations,  also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support applications.

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Natural Gas Product line

  • Siemens - Model SST-9000 - Steam Turbine

    Steam turbines of the SST-9000 series are typically operated in power plants with a power output of up to 1,900 MW. They feature a double flow high-pressure (S) cylinder and up to 3 double flow low-pressure (L) cylinders with shrunk on disk rotors for 25 and 30 Hz.

    By Siemens Power Generation based in Erlangen, GERMANY. from Steam Turbines Product line

  • Model 7044 - Response Time Monitor

    Tyne's Response Time Monitor is designed to measure the actuator response time from 'Start' signal to 'Feed back'. It also provides an alarm when the response time is over the limit. The circuit is designed with a hardware logic integrated circuit. No software is used. The display comprises four 7-segment LEDs to display from 0.01s to 99.99s. The ...

    By Tyne Engineering Inc. based in Burlington, ONTARIO (CANADA). from Nuclear Products Product line

  • Electrodes

    Manufacture of electrodes with various structures. The anodes are given a noble-metal surface coat over titanium, and the cathodes are steel or coated nickel, depending on the type of process. Anodes are of the DSA-type, dimensionally stable and customer-specific, where choice of catalytic coating is made on the basis of the actual process ...

    By Permascand AB based in LJUNGAVERK, SWEDEN. from Industrial Product line

  • Alliance - Model AC LVDT -LA-25-A Series - Heavy Duty Position Sensor

    Alliance Sensors Group LA-25-A series LVDT linear position sensors are designed to handle extreme industrial environments. This robust linear sensor has a thick wall aluminum housing (also available in stainless steel), a core enclosed inside of the core extension rod assembly that cannot break loose, while offering a sturdy male thread for easy ...

    By Alliance Sensors Group a Division of H. G. Schaevitz LLC based in Moorestown, NEW JERSEY (USA). from Linear Position Sensors Product line

  • Titanium Heat Exchanger Units

    Historically, lube and transformer oil coolers have all been manufactured with aluminium brass or 90/10 copper-nickel (also known as Cupronickel) roller expanded into brass tube plates. Tube failures were and still are commonplace, especially after a few years of service. These failures could end-up polluting the river or estuary that is supplying ...

    By Sterling Thermal Technology Limited based in Aylesbury, UNITED KINGDOM.

  • GraphMaster - Vacuum Heat Treatment Furnace Systems

    With our fully equipped research and development facility and cooperation with the academic centers In Europe, we are able toprovide innovative solutions not offered anywhere else in the world. The Group is made up of companies located in five countries onthree continents, and we sell our products worldwide. We supply our equipment to customers ...

    By Seco/Warwick S.A. based in Swiebodzin, POLAND. from Vacuum Heat Treatment Furnace Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you