Only show results in Connecticut? Ok

Organic Rankine Cycle (ORC) equipment for Energy Management

  • Premium

    Inciner8 - Model ORC - Organic Ranking Cycle Engine

    ORC technology is based on the widely known and proven Rankine Cycle principle. It was named after William John Macquorn Rankine, a Scottish polymath and Glasgow University professor. The Rankine cycle is a cycle that converts heat into energy. The heat is supplied externally to a closed loop.

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Waste to Energy Product line

  • Premium

    Inciner8 - Heat Recovery System

    Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process.

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Incinerators by Application Product line

  • Premium

    Dutch Incinerators - Electricity for Waste Heat Recovery

    Electrical power generation by an Organic Rankine Cycle (ORC). An ORC converts recovered waste heat to combined heat and power (CHP), where steam based energy recovery is not practically feasible, specifically for energy recovery at lower flue gas temperatures and smaller thermal input capacities. Power generation by a steam turbine, specifically ...

    By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS. from Waste Heat Recovery Product line

  • Premium

    Inciner8 - Heat Exchangers System

    Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Waste to Energy Product line

  • Hospital Waste – 1MW Module System

    1 MW Modular Systems for converting Hospital Waste and Sewage to Renewable Energy and Pure Water. Sizes range from a 1MW Modular System and can be scaled to meet and Hospital Waste Volume

    By NARGIS Renewable Energy Solutions based in UNITED KINGDOM.

  • Aries - Downdraft Biomass Gasification System

    Our patented designs allow us to build the world’s largest downdraft gasifier. These major size and throughput increases let our customers capture much better economies of scale, and drastically improve the financial returns over what the technology historically offered.

    By Aries Clean Energy LLC based in Franklin, TENNESSEE (USA).

  • AQYLON - Model ATM-5000H - Organic Rankine Cycle (ORC) Module

    Our ATM-5000H ORC module can recover thermal power from 10 to 25 MWth. The net electricity generation reaches 5,000 kWe if heat source temperature inlet/outlet are 305°C/170°C and cold source temperature inlet/outlet are 35°C/45°C. In theses conditions, net electrical efficiency reaches up to 24.2%.

    By AQYLON based in Paris, FRANCE.

  • Integrated Biomass Gasification Power Plant (IBGPP)

    Syngas is used as fuel in internal combustion (IC) engines that are coupled to a synchronous alternator, which produces electricity. The thermal energy generated in the form of combustion gases, both in the gasifier reactor as well as the IC engines (heat recovery) is used for generation of thermal energy either in the form of hot water, steam, ...

    By Eqtec - An EBIOSS Company based in Barcelona, SPAIN.

  • Eralp - Model HRSG - Water Pipe Waste Heat Boilers

    Waste heat boilers produced from alloy, high alloy and stainless steel according to physical properties, content, flow and process conditions of gas are designed and produced to be Water Pipe Waste Heat Boilers and Flame Smoke Pipe Waste Heat Boilers. In the gas engines and in the gas turbine, the high-temperature waste gas resulting from the ...

    By Eralp Makina Kazan Kimya Ltd. Sti. based in Mustafakemalpaşa, TURKEY. from Waste Heat Recovery Boilers Product line

  • Forced Draft - Air-Cooled Heat Exchangers

    In the forced draft configuration, fans and mechanical components are positioned below the exchanger bundle. Because the fans are in the cool air stream, horsepower requirements are slightly lower and maintenance personnel are protected from high exit air temperatures. Forced draft exchangers are well suited for high-temperature service.

    By Hudson Products Corporation based in Beasley, TEXAS (USA). from Fin-Fan- Air-Cooled Heat Exchangers Product line

  • Winterized - Air-Cooled Heat Exchangers

    Air-cooled heat exchangers in very cold climates and/or involving viscous or high pour-point fluids may require winterization for freeze protection and process temperature control. To prevent process fluids from freezing and to protect the exchanger, the exchanger is equipped with automatic louvers and recirculation chambers to mix warm exhaust ...

    By Hudson Products Corporation based in Beasley, TEXAS (USA). from Fin-Fan- Air-Cooled Heat Exchangers Product line

  • Hudson - Large Fan Field Erected Units

    Our large fan field erected units are available in bay sizes up to 70 feet by 54 feet and fan diameters up to 36 feet.  Our modular design and construction expertise allows for fast and dependable field erection.  Benefits of the large fan design include:

    By Hudson Products Corporation based in Beasley, TEXAS (USA). from Fin-Fan- Air-Cooled Heat Exchangers Product line

  • Induced Draft - Air-Cooled Heat Exchangers

    The induced draft configuration positions the fans above the exchanger bundle. High velocity hot air exhaust reduces the risk of hot air recirculation, and plenums protect the exchanger bundle from the elements. Induced draft exchangers are well suited for lower process temperatures and for applications  where hot air recirculation is a ...

    By Hudson Products Corporation based in Beasley, TEXAS (USA). from Fin-Fan- Air-Cooled Heat Exchangers Product line

  • Ultra Lite - Model 3 - Solar Concentrators

    Our Ultra Lite 3 trough design does not use an air envelope, but a mirrored film adheared to an aluminum sheet that is held in a parabolic shape by a super-structure. A low-cost, low-temprerature (up to 200C) linear receiver replaces the much more expensive 'evacuated tube linear receivers' for process heating and ORC power generation ...

    By CSP - Ultra Lite Solar Inc. based in SASKATCHEWAN (CANADA).

  • CraftEngine - Model ORC - Waste Heat Recovery System

    CraftEngine: The most flexible ORC waste heat recovery system on the market. The CraftEngine is an ORC piston-based system specially engineered to transform low-temperature waste heat from 80°C and upwards into electricity. The system can also produce usable heat (CHP) in cases where input temperatures are higher than 150°C. Among its ...

    By Viking Heat Engines AS based in Kristiansand, NORWAY.

  • Biomass CHP Plant

    The thermal energy created by combusting biomass can be turned into electricity via a biomass CHP plant. This works by using some of the heat created to drive a turbine and the excess thermal energy is then used to provide either process heat or district heating.

    By Imperative Energy Ltd (IEL) based in Naas, IRELAND. from Other Product line

  • TransPacific - Ocean Thermal Solar Energy Conversion System (OTEC)

    TPE uses the temperature differential between deep (40 F) and shallow waters (80 F) to drive its ORCs and produce power and, as a by-product, fresh water through desalination. Very few OTEC systems were developed as they had an overall efficiency of only 1 to 3%. TPE's system can offer you a maximum efficiency between 6 and 9% due to our unique ...

    By TransPacific Energy (TPE) based in Henderson, NEVADA (USA).

  • Energent - Variable Phase Cycle Power System

    The Variable Phase cycle is a patented power system that generates power from waste heat and geothermal resources. The Variable Phase Turbine enables an efficient system for waste heat recovery and geothermal power generation.

    By Energent Corporation based in Santa Ana, CALIFORNIA (USA).

  • Biomass Combined Heat and Power Plant (CHP)

    Biomass is considered a renewable energy resource that can be used to provide the necessary fuel for heating, steam or power applications at various commercial, governmental, institutional and industrial facilities. For example, bio-power (biomass-to-electricity power generation) is a proven electricity-generating option. The majority of ...

    By Wright Tech Systems Inc. based in Richmond Hill, ONTARIO (CANADA).

  • Texas - Model LT-Series - Power Generation Modules

    Designed using cutting edge-technologies, the LT-Series ORC power generation modules by Texas Green Technologies are a compact and efficient solution for small-scale primary power generation. Available in a models ranging from 100 a 175 kWE, and able to work even under partial load (i.e. thermal input lower than nominal) LT systems use overheated ...

    By Texas Green Technologies LLC based in Richmond, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you