Only show results available in Connecticut? Ok

Plate Heat Exchangers equipment for Energy Management

  • Premium

    Anguil - Industrial Energy & Heat Recovery Solutions

    Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Other Product line

  • Premium

    Munters Des Champs - Heat Exchangers and Energy Recovery Wheels

    Des Champs heat exchangers offer designs utilizing plate counterflow heat exchangers, heat pipe, and energy recovery wheels. These heat exchangers form the backbone of many system configurations and can be configured with unique traversing frost prevention. Des Champs heat exchangers have been used everywhere from the hottest climates to ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    Z-Duct - Model Series 85 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    Z-Duct - Model Series 84 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    Munters - Model Series 79 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    Munters Z-Duct - Model Series 74 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    Munters Z-Duct - Model Series 75 - Heat Exchangers

    Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Premium

    Munters Thermo-Z - Welded Plate Heat Exchanger

    The Thermo-Z plate style heat exchanger is designed to recover heat from energy consuming processes up to 1500°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-Z offers fully adjustable plate thickness and spacing as well as multiple flow patterns.  ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Heat Exchangers Product line

  • Nexson - Model Type 1 - Spiral Plate Heat Exchanger for Liquid Duties & High Pressures / Temperatures

    Thanks to its specific design, the liquid to liquid heat exchanger can handle one or two fouling fluids. Both channels are easy to access for inspection and cleaning. Your alternative to the shell and tube heat exchangers ! This SPHE model is specifically designed to handle up to 200 barg / 450°C for tough applications.

    By Nexson Group based in GARCHIZY, FRANCE. from Spiral Plate Heat Exchanger Product line

  • GreenBox - Bi-Phasic Welded Heat Exchanger

    Welded heat exchanger with “baffles” for condensing / evaporation.

    By Nexson Group based in GARCHIZY, FRANCE. from Welded Plate Heat Exchanger Product line

  • Dryair - Model HESF 1000 - Steam Plate Heat Exchanger

    Steam-to-fluid plate heat exchanger Utilizing steam as the heat source.

    By Dryair based in Bowling Green, OHIO (USA). from Central Heating Units Product line

  • Plate Heat Exchangers

    ATMOSTAT designs and manufactures a range of high performance heat exchangers made of superimposed pre-machined plates allowing channel geometries dedicated to each application.

    By Atmostat based in Villejuif Cedex, FRANCE.

  • Fullway - Copper Strip for Heat Exchanger

    It is mainly used to manufacture heat exchanger covers and plates, heat exchanger plates of automobile tank, components of air cooler, etc

    By Fullway Technology Co., Ltd based in Suzhou City, CHINA.

  • Heat Integrated Wall Reactor (HIWAR)

    Helbio’s technology is based on proprietary and patented reactor catalyst configurations for reformation processes. The reactor configurations utilize the concept of the Heat Integrated Wall Reactor which offers very rapid heat exchange characteristics.

    By Helbio S.A based in Rio, GREECE. from Helbio Technology Product line

  • BV-Thermal - Model HRE - Liquid Heat Exchanger

    The Liquid Heat Exchanger is designed for highly efficient heat transfer by providing closed loop circulation of temperature controlled coolant.  Controlled temperature coolant is circulated from an enclosed reservoir by a high reliability pump.  The heavy duty design makes it ideal for demanding commercial and industrial  ...

    By BV Thermal based in Willoughby, OHIO (USA). from Heat Exchangers Product line

  • Dimple-t - Plate Heat Exchanger

    The Dimple plate heat exchanger represents a special panel heat exchanger form: its panels are fully welded together. The spot-welded panel elements – the dimple-plates – undergo pneumatically or hydraulically a cold forming shaping process. The resulting elliptical flow ducts, so called dimples, increase the turbulence of the flow due ...

    By Dimple-t Bulk Solids Cooling based in Winterswijk, NETHERLANDS.

  • Clean Plate Heat Exchange System

    Has a very small footprint, approx. 6 square feet. Integrates simply, requires only an injection point. Imparts infusion only minutes per hour very low power draw. Uses plant compressed air. Imparts infusion automatically, no technician intervention. Eliminates liquid biocide storage. Uses a simple resin cartridge, changed monthly.

    By Aqua Production Systems Incorporated based in Plymouth, NOVA SCOTIA (CANADA).

  • Delta - Model DPHE - Plate Heat Exchangers (PHE)

    Plate Heat Exchangers (PHE) are designed to provide maximum efficiency in heat transfer using non corrosive metals for various aquatic heating and cooling applications using the minimal amount of floor space. The exchangers are used in conjunction with chiller and boiler equipment. PHE units range from 4 to 300 gpm.

    By Delta Hydronics based in Hudson, FLORIDA (USA).

  • Platular - PCV Heat Exchangers

    The PCV is a very robust PLATULAR welded plate heat exchanger with a high thermal performance. It was especially developed for high pressure district heating networks.

    By Barriquand Group based in Roanne Cedex, FRANCE.

  • Brazed - Plate Heat Exchanger

    Compact and ultra-efficient, brazed plate heat exchangers are used in HVAC and environmental engineering for heating, cooling, network separation applications .

    By Barriquand Group based in Roanne Cedex, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you