Plate Heat Exchangers Equipment For Energy Management Available In Connecticut
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
HRS Gasketed Plate Heat Exchangers are manufactured as standard from either AISI 304/316 stainless steel or titanium to a thickness of 0.6mm, although plate thickness options of 0.8mm or 1.0mm are also available if required. The exchangers are fitted with EPDM or NBR gaskets with the frames constructed from painted carbon steel. A double seal arrangement around the two ports ensures that if fluid ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Brazed Plate Heat Exchanger range works on the same principle as conventional plate heat exchangers, but consists of a pack of corrugated plates joined together and sealed by furnace brazing. Typically the units are copper brazed, however for applications where the medium is aggressive to copper, or for where temperatures range from 225°C to 400°C, then nickel is used. The plates ...
-
Manufactured by Linde AG, Engineering Divisionbased in GERMANY
LNG is natural gas in its liquid form. In order to liquefy natural gas, it must be cooled to cryogenic temperatures of approximately -160°C. As a liquid, natural gas occupies only 1/600 of the volume of natural gas (at atmospheric pressure) in its gaseous form and therefore allows for more economic and practical storage. It is also easer to transport over great ...
-
Manufactured by Delta T Thermal Solutions LLCbased in USA
The MAXCHANGER all-welded plate heat exchanger offers higher performance, in less space, at a lower cost. The unique geometry of the patented MAXCHANGER’s variable interspaces produce extremely high “U” values. Channels formed between the specially dimpled, welded plates direct the two heat transfer media counter currently through alternate paths for maximum efficiency, ...
-
Manufactured by Separator Spares International (UK) Ltd (SSI)based in UNITED KINGDOM
Heat exchanger plates stocked by SSI are available in titanium and stainless ...
-
Manufactured by PF10 Impianti Industrialibased in ITALY
The ETW model is a vacuum evaporator/concentrator with heat exchanger submerged in the treated fluid or, at customer’s request, with an outer shell and tubes heat exchanger. Alternatively, PF 10 can install special submerged plates heat exchangers. These vacuum evaporators/concentrators exploit during the evaporation phase the thermal power supplied by hot water or steam and for the ...
-
Manufactured by Hydro Thriftbased in USA
A heating solution for the most demanding equipment and process requirements. Industrial processing with hot adhesives, equipment and comfort space heating, food preparation requiring precise kettle temperature control, and sanitary water instantaneous-heating systems for pharmaceutical wash down are just a few of the applications solved with a HydroThrift heated water system. Continuously, ...
-
Manufactured by Zhejiang Forwon Plate Heat Exchanger Co., Ltdbased in CHINA
Zhejiang Forwon brazed plate heat exchangers are designed for and commonly used in all types of refrigeration,cooling,air conditioning and heating ...
-
Manufactured by Barriquand Technologies Thermiquesbased in FRANCE
The Platular® fully welded plate heat exchanger’s thermal performance and minimal temperature approach is particularly suitable for exchanges on difficult, viscous fluids or fluids charged with suspended materials, but also for the condensation of vapor under vacuum (steam, C.O.V…). Thanks to the multi-pass design possibilities on each circuit, the Platular® is also well ...
-
Manufactured by LOVATO S.p.Abased in ITALY
MACUK RSM PRO is a recessed and wall-hung heat interface unit for heating (high and low temperature) and for the instantaneous production of domestic hot water via a stainless steel plate heat exchanger. The module is suitable for installation in apartments and single houses managed by centralized systems. The installation is quick and simple: MACUK RSM PRO only needs the hydraulic connections on ...
-
Manufactured by GESMEX Exchangers GmbHbased in GERMANY
Plate & Shell heat exchangers combine the, compact and countercurrnt, advantages of plate heat exchangers (Plate), coupled with the high pressure ratings of shell and tube heat exchaners provided by cylindrical shells (Shell). So, the best of both worlds. Heat transfer surfaces of 1 m² to 1000 m² enables thermal performance ranges from 10 kW all the way up to 100 MW (obviously ...
-
Manufactured by Sondex A/S - Member of the Danfoss Groupbased in DENMARK
Danfoss and SONDEX® brazed heat exchangers (XB/SL) have been consolidated into a single, combined product portfolio for complete coverage of all applications. The durable, permanently sealed heat exchangers feature advanced technology and superior safety measures designed to provide you with the ultimate in heat transfer with minimal operational costs. Our brazed plate heat exchangers (XB/SL) ...
-
Manufactured by Sondex A/S - Member of the Danfoss Groupbased in DENMARK
Our SONDEX® plate condensers are the perfect choice for special applications that regular plate heat exchangers cannot handle. Designed to handle high-volume vapor flows, this product features a large inlet for the vapor stream. This, combined with a short residence time creates the optimal condensation conditions– even for low-pressure vapor duties. Applications that demand flawless ...
-
Manufactured by Polaris Plate Heat Exchangersbased in USA
Get total separation of primary and secondary fluids with the Safety-Pair® Double-Wall Plate Heat Exchanger from Polaris. Paired plates create an air space, making leaks visible from outside. Leaks reach the atmosphere from between plates or from drain channels in the inlet/outlet areas. Media can’t mix, and there’s no risk of contamination. When plumbing codes require double-wall ...
-
Manufactured by Fives Groupbased in FRANCE
Fives and its Cryogenics - Energy business line provide ultimate performance brazed aluminium heat exchangers (BAHX) based on the renowned Trane technology. The technology of brazed aluminium plate-fin heat exchangers was developed during World War II in response to the demand for light, compact and efficient heat transfer equipment for the aircraft industry. In the early 1950's, this technology ...
-
Manufactured by Nexson Groupbased in FRANCE
High turbulences and strong mechanical capacity. Robustness , reliability for welded block heat exchanger is the key point. Nexson has patented his own welded block heat exchanger, named GreenBox ™. With proven pressure and temperature cycling tests, this type of heat exchanger is one step ahead the competition in terms of ...
-
Manufactured by Eclipse, Inc.based in USA
Exothermics' DSP Dimple Plate Heat Exchangers are fully-welded and can be manufactured in a wide variety of sizes. They can also be configured for counter-flow or cross-flow operation. In these exchangers the parallel plates are formed with either staggered or inline dimple patterns to reduce the potential for particulate fouling. The Dimple Plate Heat Exchanger can recover energy from an ...
-
Manufactured by PAW GmbH & Co. KGbased in GERMANY
The compact and completely premounted solar transfer station is completely insulated and equipped with a generously dimensioned stainless steel plate heat exchanger and with a preset and prewired controller.For a simple and quick installation as well as a safe ...
-
Manufactured by Plate Concepts, Inc.based in USA
Our Free Flow Plate Heat Exchangers maximize heat recovery from fibrous or viscous fluids with minimal maintenance. Free Flow or Wide-Gap plates are specially designed with no metal to metal contact and large gaps (5 mm to 11.5 mm) between plates in the liquid area – allowing large particles to pass through the exchanger with minimal risk of ...
-
Manufactured by Energy Panel, S.L.based in SPAIN
These thermodynamic solar systems has been designed for pool heating, extending the bathing season for outdoor pools or for cover pools throughout the year with very low electricity consumption through the solar use of our ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you