Power Generation Equipment Equipment For Energy Management
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Saturn gas®turbines have proven themselves in over 4800 installations. Introduced in 1960, they have logged more than 620-million operating hours and are available in a single-shaft, constant-speed configuration for driving ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Centaur® gas turbines are at work today in thousands of installations both offshore and on land ranging from arctic to tropical ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Centaur® gas turbines are at work today in thousands of installations both offshore and on land ranging from arctic to tropical ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
The WindHorizon H200 is a compact, high-precision forward-looking Nacelle Lidar that accurately detects wind speed and direction information for any 10 distance gates from 50m to 200m directly in front of the turbine hub. It is suitable for application fields such as turbine yaw error correction, wind turbine power curve test and feedforward control to reduce fan load. It is of great significance ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
Manufactured by Langson Energy, Inc.based in USA
Langson Energy’s Steam Machine is an industrial steam generator that is an economically viable solution to improving energy efficiency and recovering energy from waste heat and waste steam. It works with various types of steam and waste heat in many different industrial processes – especially those with saturated steam. It utilizes helical screw technology, which has been an integral ...
-
Manufactured by Wabash Power Equipment Companybased in USA
Wabash Power has over 60 years of experience in providing clients with exceptional power equipment. We stock a selective yet comprehensive range of gas turbine generators ranging from 200KW up to 100 ...
-
based in NETHERLANDS
The most versatile LM2500 (+) maintenance dolly with many practical improvements. Applicable for LM2500 and LM2500+ versions; Can be used as stand alone gas turbine, gas generator or power turbine dolly; Can be used as transport or maintenance dolly; Secure transport through TMF aft flange support (thick and thin flange); Support brackets for DLE manifold ...
-
Manufactured by PBS Velká Bíteš, a.s.based in CZECH REPUBLIC
PBS turbines can be used to propel various types of machinery in many ...
-
Manufactured by Siemens Energy Global GmbH & Co. KGbased in GERMANY
A trusted choice, proven in critical operations. Simple cycle power generation (ISO) up to 37.2 MW(e). Mechanical drive: 38.5 MW. Qualified and proven in oil and gas applications, onshore and ...
-
Manufactured by Siemens Energy Global GmbH & Co. KGbased in GERMANY
A steam turbine with short start-up times and variable start-up modes to ensure grid stability. Siemens Energy Steam Turbines of the SST-5000 series are operated in combined cycle power plants (CCPP) and in steam power plants (SPP). The SST-5000 steam turbine combined with a gas turbine, is able to achieve a net plant efficiency of more than 64 percent in combined cycle ...
-
Manufactured by Siemens Energy Global GmbH & Co. KGbased in GERMANY
Siemens Energy Steam Turbines of the SST-6000 series are widely operated in steam power plants with a power output up to 1,200 MW and an efficiency up to more than 46 percent. Products of the SST-6000 series consist of a high-pressure turbine, an intermediate-pressure (IP) turbine, and up to three low-pressure turbines for 50 and 60 Hz. The SST-6000 is installed as a high-level arrangement with ...
-
Manufactured by Anhui Jnge Power Co.,Ltdbased in CHINA
The wind/solar hybrid controller is the intelligent power with integration of controlling . It can store electrical power generated by the wind turbine and solar panels into the storage battery. The controller not only has perfect appearance, LCD display and convenient operation, but also has over-charge protection, over-voltage protection, over-hot protection, under-voltage protection, ...
-
Manufactured by Alstombased in FRANCE
Power producers around the world continually strive to increase their competitiveness and profitability by saving fuel, reducing operating costs, and delivering cleaner and reliable power. Alstom’s high performance advanced class gas turbines, the GT24 for 60 Hz applications and the GT26 for 50 Hz markets, deliver the efficiency, high availability and lower environmental impact to meet ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
PCI is developing oxy-fuel combustion technology for use with applications in gas turbine power cycles, coal powered plants, and production of methane hydrates as well as enhanced oil extraction applications. The need to keep pollutant emissions at ultra-low levels, increase power plant efficiency, and provide a path forward for carbon capture has led to the development of oxy-fuel combustion in ...
-
Manufactured by Kennametal Inc.based in USA
Plasma Transferred Arc (PTA) hardfacing is a versatile method of depositing high-quality metallurgically fused deposits on low cost surfaces. Soft alloys, medium and high hardness materials, and carbide composites can be deposited on a variety of substrates to achieve diverse properties such as mechanical strength, wear and corrosion resistance, and creep. PTA hardfacing has significant ...
-
Manufactured by Zuccato Energia Srlbased in ITALY
We transform energy. From heat to clean electricity. Zuccato Energia produces electricity from your waste heat. The ORC Systems recover the flue gases of your process and transform it into zero emissions energy. With ORC you can reduce costs and increase your competitiveness finding application in industries (such as glass, steel, ceramics and cement) waste and biomass disposal, engine exhausts ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you