Only show results in Virginia? Ok

Power Generation Applications

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Portable and fixed gas analysers for gas flaring

    Methane is a powerful greenhouse gas and should be destroyed before it enters the atmosphere. Flaring is a common solution for gas with CH4 10% - 40%.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Motion control solutions for the power generation sector

    Motion control solutions for the power generation.

    By Hilliard Corporation based in Elmira, NEW YORK (USA).

  • Premium

    Online monitoring solutions for the power generation industries

    Fundamental changes are evident in the power industry. From a highly regulated and monopolistic industry, it is evolving rapidly into a marketplace defined by increasing competition and deregulation. Technology providers should be in the game allowing power companies to focus on their core business, producing electricity at maximum efficiency.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Piping & ducting solutions for the power generation industry

    The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. based in Westminster, MARYLAND (USA).

  • Fabrication solutions for the wind energy industry

    Modern wind turbines include a variety of components from BRÜCK. Our products are found in the power transmission in the form of bearings, flanges, gear and generator parts as well as in the pitch and gondola housing. Due to our vast depth in manufacturing and the enormous production capacity, we can cover the usual in the wind power industry requirements and high demands in the situation. Many global players in the wind energy sector benefit from BRÜCK proposed solutions for structural design of...

    By BRÜCK GmbH based in Saarbrücken-Ensheim, GERMANY.

  • Thermal structures insulation for power generation industry

    Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation requires.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Energy management

    With energy costs skyrocketing, companies are looking for ways to optimize energy usage and cut costs, but maintain production output. Companies now capture details of energy use, such as peak and non-peak use and type of fuel used— natural gas, steam, coal, etc. There are different programs such as Energy Star that companies are using for guidance and reporting.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Optimized solutions for the power industry

    Preventive maintenance: extend the life of critical machine parts by as much as 500%. Castolin Eutectic is your resource for protection, wear and joining solutions. We believe in working with our customers to find the best answers to their problems. As the wear problem expert, we can provide solutions for: manufacture of new finished and semi-finished wear parts, repair of broken parts, rebuilding of worn parts, protection against wear and corrosion, choice of fusion technologies and much more. Our expertise is...

    By Castolin Eutectic based in St-Sulpice, SWITZERLAND.

  • Spill control for power generation

    By Antech Hydraulics Ltd based in Poulton-Le-Fylde, UNITED KINGDOM.

  • Aluminium-Air Technology for Distributed Generation

    Long Duration Offers up to days and weeks of energy independence. Long Standby Can standby for years without losing performance. Available & Flexible Supports the grid by balancing intermittent energy sources. Zero Emission Keeps urban spaces clean. Cost-Effective Simple and abundant materials allow for low cost solutions. Safe & Quiet Great for residential neighborhoods and in-door facilities.

    By Phinergy based in Lod, , ISRAEL.

  • Wood Cogeneration for Industry

    Any company that has a need for both heat and power is an ideal fit for the Borealis wood power system, especially if located in a rural setting where energy costs are high. The application requirement must be for the full 45 kWh of power for immediate use. If power requirement is not that high, then this energy can be sold to the regional power grid often at preferred rates. Options for off-grid solutions are being reviewed.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Glass Fabrics for Wind Energy

    STEKLONiT offers solutions for wind energy, one of the most promising sectors of electric-power industry. Thanks to inherent high quality, physical-mechanical properties, light weight, STEKLONiT’s glass fabrics are used in manufacture blades and tubes of wind power generators. Products can be manufactured according to a customer`s requirements and delivered to any place in the world.

    By Steklonit JSC based in Moscow, RUSSIA.

  • Adhesive technology solution for renewable energies industry

    The debate around the phase-out of nuclear power has highlighted it once again: there`s no getting away from renewable energy. Improvements in efficiency and performance are the challenges that manufacturers must now face. And it is precisely here that the innovative adhesive technology from Lohmann plays an important role. The more reliably and efficiently components are connected, the longer-lived and more economical the overall system is – irrespective of whether energy is obtained from solar systems or...

    By Lohmann GmbH & Co.KG based in Hebron, KENTUCKY (USA).

  • Organic Rankine Cycle for Electricity from Heat Recovery

    Turboden ORC can produce electricity by recovering heat from industrial processes, reciprocating engines and gas turbines. The power of Turboden units generally ranges between 200 kW and 15 MW electric.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you